Lab Condensers
Lab condensers are ideal for a range of lab applications and assist with the condensation of gases and vapors into a liquid state. Condensers are good for cooling vapor and condensing it back into a liquid form, recovering solutions by cooling and condensing the solvent vapors. Temperature-controlled environments can maintain reactional temperatures and improve process control during applications where this is required.
At Thomas Scientific, we offer a range of condensers with various application suitability. All carry specially formed spiral tubes that provide a vapor path to ensure excellent heat transfer and anti-flooding features to ensure clear and precise results. Multiple shape and sizing options are available, including a vertical condenser, detachable condenser, and a Friedrichs condenser, which makes them compatible with other laboratory equipment.
Thomas Sci has a variety of other glassware, such as glass joints and glassware kits.
-
Spiral Reflux Condenser
Ace GlassSpiral reflux condenser with inlet and outlet hose barbs located on the same side at the top of the condenser body for easy hose connections. These condensers are available in multiple lengths which allow for greater surface area dependant on the appli
-
Cold Finger Condensers
ChemglassCondenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Keck Clips
United Scientific SuppliesPlastic conical joint clips are size 24, designed to securely hold 24/40 joint size glassware together. Note: Clips shipped are blue
-
Allihn Condensers with Full Length Water-Cooled Joints
DWK Life Sciences (Kimble)For use in many refluxing operations, including Soxhlet extractions. Straight outlet tube at top Water-cooled Standard Taper inner drip joint at bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Liebig Condensers
United Scientific SuppliesLiebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40
-
SYNTHWARE Jacketed Distillation Condensers
Kemtech AmericaIndentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.
-
High Efficiency Reflux Condensers
ChemglassCompact high efficiency reflux condenser employs a double wall thimble shape bulb sealed into the outer jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. While the overall height of this condenser is only…
-
Column 190 mm 19/22
CorningThe PYREX® distilling condenser has 19/22 Standard Taper inner and outer joints, is simple in design and easy to use. Side tubulations are 10mm O.D. Distilling condensers are widely used in the lab, especially for fractionation. This condenser is also a replacement for organic chemistry kit No.…
-
PYREX® Liebig Condensers
CorningSuitable for the use in vacuum distillations With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has Standard Taper 19/38 joints; others have 24/40 joints
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
SYNTHWARE Reflux Condensers
Kemtech AmericaCoil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.
-
This specially designed PYREX® cold finger condenser is a replacement part for the PYREX® Cyanide Distilling Apparatus (Thomas No. 0320A91)
-
SYNTHWARE Mineral Oil Bubblers
Kemtech AmericaMineral Oil Bubbler, Body OD: 26mm,Overall Height: 185mm OR 500mm, Hose Connection: 10mm **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
These PYREX® condensers have a high surface area per unit length of the 300mm long jacket with a 24/40 Standard Taper outer joint at the top and a plain drip tip at the bottom. They are primarily used in distillation assemblies. Condenser tubulations are approximately 10mm O.D.
-
Microscale photochemical reactor with internally threaded connections both top and bottom of head. Top is #15 Ace-Thred that accepts 12.5-14mm O.D. tubes such as 9720-23 Finger Condenser; bottom is #25 Ace-Thred that accepts a 24mm O.D. quartz or glass (borosilicate) tube for photolysis…
-
This PYREX® Friedrichs type condenser affords very efficient operation. The helical inner tube fits closely within the jacket. The vapor tube is sealed to the jacket at an angle of 75° and has an outer 24/40 Standard Taper joint.
-
Liebig Condensers
ChemglassSmall scale Liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Concentrator Condensers
ChemglassVapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose…
-
Condenser, Cold Finger
Ace GlassCold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 con
-
Liebig Condensers
ChemglassCondenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Allihn Condensers, Static Waterless
ChemglassStatic Waterless Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint and GPI thread on side for filling the condenser with ethylene glycol. Supplied with open top cap and septa for closing off once the condenser is filled. No issues with…
-
With water cooled standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D.
-
SYNTHWARE Air Reflux Condenser
Kemtech AmericaVigreux Distilling Column, Microscale, Synthware, Joint: 14/10, Overall Length: 122mm, Length Indented Section: 75mm, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.
-
Two piece cold trap style condenser for use with rotary evaporators. Condenser has an additional 19/38 outer joint sealed onto the condenser to allow continuous feed of volumes exceeding the capacity of the evaporating flask. The 19/38 joint is sealed at an angle which allows the condensate to fall…
-
Reflux Condensers
ChemglassReflux condenser having an internal coil that is water jacketed. Vapors are condensed both on the coil and the inner wall of the jacket. The top end has a standard taper outer joint and the lower end has an inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Condenser, Reflux, Spiral
Ace GlassSpiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.
-
Condenser, Reflux
ChemglassCoil style reflux condenser with a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Hose connections are on the bottom of the condenser which makes it easier to connect hose/tubing. Jacket has a O.D. of 41mm while the coil O.D. is 8mm.…
-
Reflux Condensers, Double Cooling
ChemglassHigh efficiency reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE:…
-
PYREX West Condensers
CorningAvailable with 200 or 300 mm long heavy-wall outer jackets PYREX® West condensers are designed with a heavy-wall outer jacket to provide a sturdy, long-lasting unit, while the inner tube has a thinner wall for efficient heat transfer. The tubulations are on the same side to reduce breakage.…
-
Condenser, Triple Coil, High Capacity
Ace GlassHigh through-put, high capacity triple coil condenser has even higher capacity than double coil or rotary evaporator type condensers. Unit is designed with three internal coils for processing large volumes of cooling water and large volumes of material