Allihn Condenser

Allihn style reflux condenser with a plain tubulation at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.

Borosil® Allihn Condensers have an interchangeable inner and outer joint with a drip tip. The Allihn Condenser has a more surface area than the Liebig, with a series of bulbs which generates a higher cooling capacity. This condenser is ideal for laboratory scale refluxing. There is an inlet and…

Allihn Condenser Jacket Length: 120, 200, 300 or 400mm available Joints: 14/20, 19/22 or 29/42 available Hose Connection OD: 8 or 10mm With outer joint at the top and inner joint at the bottom.

Allihn - suitable for use in vacuum distillations With condensing tube expanded by series of bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip tip…

Static Waterless Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint and GPI thread on side for filling the condenser with ethylene glycol. Supplied with open top cap and septa for closing off once the condenser is filled. No issues with…

Bulb type, approximately one bulb per 50mm, with water cooled standard taper 24/40 inner and outer joint at bottom and top.

Bulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.

Bulb type, approximately one bulb per 50 mm, with various joint sizes at bottom and top. Available with hose barbs or Ace-Safe connectors.,/p>

Allihn Condenser, Removable Hose Connections Jacket Length: 120, 200, 300 or 400mm Joints: 14/20, 24/40, or 29/42 Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.

Allihn style reflux condenser similar to CG-1206 but with detachable hose connections. Connections are made of polypropylene and provide a safe and easy way of connecting and disconnecting flexible tubing to the condenser. Hose connections have an O.D. of 8mm and an I.D. of 4mm. Supplied complete…

For use in many refluxing operations, including Soxhlet extractions. Straight outlet tube at top Water-cooled Standard Taper inner drip joint at bottom Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A…

Allihn Reflux Condenser with a water cooled inner drip tip at the bottom for Soxhlet Extractors. Joint Size: Available in 34/45, 45/50, and 55/50 Jacket Length: Available in 190, 260, and 300mm.

Borosilicate glass Allihn style condenser except with a 45 degree angle from bottom joint. New Style saves height space vs. standard vertical condensers. Has matching top and bottom standard taper joints Hose barbs are size D glass, off side of body to

Bulb type for use with regular extraction apparatus. Improved design permits greater condensing capacity. Jacket lengths approximately 255mm with one bulb per 50mm.

Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.

With surface of bulbs on one side and the other side flat to permit its use on an angle. With standard taper 24/40 inner and outer joints at top and bottom.

Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

…a 300mm long condensing column. Our Liebig Condensers are made from high-quality borosilicate glass and have a straight sealed inner tube and two inlet/outlet arms. These condensers have a 300mm long condensing column and 24/40 ground glass joints. Our 300mm Allihn Condenser is made from…

Cold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 con

…type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of an Allihn condenser, extractor and flat bottom flask.

…for drying samples at a temperature as a function of the solvent boiling point. The desiccant flask has a 34/45 outer joint for connection to the drying chamber. All other joints are 24/40. Complete apparatus consists of a desiccant flask, drying chamber, round bottom flask and Allihn condenser.

…long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert atmosphere. Stopcocks are 2mm bore PTFE. Joint on lower drain arm is 14/20, all others 24/40. Complete unit consists of adapter, condenser, storage head, column, flask and…

…wastes and other water. Method is described in Standard the Examination of Water and Wastewater. Fourteenth Edition, 1975. consists of a 500mL Claisen flask with 24/40 joints, thistle tube, Allihn condenser, tube 24/40 - 18/7, elbow connector 18/7, 270 mL spiral gas washer, stopcock flask.

…purpose benchtop reactor. Self-supported with a 20 x 15in footprint, 33 in high. Reactor features a 100mm (4 in) head with (4) 24/40 joints, an allihn condenser, a pressure equalizing funnel, overhead glass stirring assembly with variable speed motor and controller, heating mantle with type J PTFE…

…and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is protected from accidental damage by the vapor tube. Extractor has a Standard Taper outer joint at the top for connection to the condenser and a…

…tube (70mm or 100mm approx. I.D.) and an Allihn condenser. The extractor capacity is the solvent volume held in the extractor to the top of the siphon tube. The extractor has a standard taper outer joint at the top for connection to the condenser and a standard taper inner joint at the bottom…

…some type of ventilation system be used above or near the units in case of a drop in condenser water temperature or loss of condenser cold water supply. This system comes complete with PYREX® Allihn condenser with a 45/50 Standard Taper inner joint and 500mL PYREX® round bottom boiling flask with…

…and has Standard Taper 24/40 outer and inner joints. The complete unit consists of a special outlet adapter with a double bend, a 300mm long Allihn condenser, a cylindrical separatory funnel, a right angle inlet adapter with a bubbler tube, a right angle hose connection adapter (LG-1702-102), and a…