Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…

From streamlined contours to interchangeable lids and bodies, Borosil® Non-Vacuum Desiccators reflect great care and attention to detail. Supplied with a porcelain plate and ground glass flanges, these desiccators are perfect for drying, and for storage of moisture-sensitive substances. …

Stack up to Five Units Perforated shelves are movable to suit your dry storage needs in this desiccator cabinet that stacks up to 5 units high. Smoke-tinted, polystyrene Two removable shelves can be set at four heights Pull down door slides out of the way into a compartment…

Ideal for storing electrostatic discharge (ESD) sensitive devices such as CMOS, MOSFETS, hybrids, etc., under an inert, clean, dry atmosphere Designed and constructed to prevent static buildup and eliminate ESD damage Expanded stainless shelf assemblies slide on conductive runners and…

Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…

Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…

This 5.8L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO. Warning: Not for vacuum applications. Do not heat or …

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The…

Excellent for storage of hygroscopic chemicals, and to prevent adsorption of moisture when using crucibles, weighing bottles, and watch glasses. Plastic screw-thread top cap for easy cover removal Recessed base for containment of desiccant Includes metal plate Manufactured from…

Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…

These autoclavable desiccators are made of polypropylene and polycarbonate and can hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen…

This desiccator cabinet is ideal for creating a carbon dioxide atmosphere for tissue culture processing or flushing with nitrogen to create an anaerobic environment. Two gas ports allow the cabinet atmosphere to be rapidly and effectively flushed. The gas port stopcocks are 4mm diameter and accepts…

Color-indicating silica gel beads for use in refilling the Secador® auto-desiccator module. Unlike other desiccants, silica gel is non-friable and won’t disintegrate into powder even after repeated regeneration. Absorbs moisture from the air Inert, non-toxic and non-corrosive …

Plates include numerous 5mm diameter perforations. Also includes large hole in center. Glazed on one side. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Every batch of porcelain is heat tested in our…

Desiccant packets effectively adsorb moisture in product packaging to combat its damaging effects, including corrosion, mold, and degradation. Desiccant packets are a simple, dependable, and economical solution for preventing moisture damage in properly enclosed packages, or containers. …

The attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and light sensitive products. Choose from an extensive selection of sizes, styles and colors of desiccator cabinets to meet your specific dry storage…

Holds a vacuum of 740 mm of Hg for 24 hours Lightweight and shatterproof vacuum desiccator; lid of transparent polycarbonate Removable pan holds calcium chloride or other drying agents; is non-corrosive Does not include desiccant or plate.

These autoclavable desiccators are made of polypropylene and polycarbonate and can hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen…

Each Dricycler desiccator is supplied with an easy to read, door mounted hygrometer Double action door locks and door gasket provide an airtight and moisture-proof environment 25 to 35% or lower humidity levels are maintained 2 glass sides and glass door provide full observation of…

This sturdy Secador® desiccator cabinet has a large, wide storage space and provides easy, reliable dry storage of moisture and UV sensitive products. Durastar® co-polyester construction blocks 99% of UV light and is resistant to staining, crazing and chemical attack Large door…

Store any components requiring controlled storage conditions, such as anhydrous and hygroscopic biological and chemical compounds and electronic assemblies. Thermo Scientific™ Nalgene™ Acrylic Desiccator Cabinets are clear and feature gaskets to provide a tight seal. Neoprene…

KIMAX® desiccators are designed and made for durability and efficiency in daily laboratory use. Ideal for removing moisture from solids, storing hygroscopic materials, and applications requiring vacuum desiccation. Can also be used for cooling oven-dried samples while maintaining sample…

These All Clear Polycarbonate (PC) Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in…

These PYREX® desiccator cover sleeve rings are replacements for 2.2L desiccators No. 3118-160.

View contents easily with Thermo Scientific™ Autoclavable Polypropylene Desiccators, featuring a robust body and high resistance to all solid desiccants. These desiccators have a transparent polycarbonate cover. The small size (3756C20) comes with a 140mm aluminium plate. The plate for the…

Maximize your space in the laboratory or classroom. In less than 12" of benchtop space, these strong, shatterproof desiccators will provide dry storage and protection for moisture-sensitive products. ‘Flat Dome,’ clear polycarbonate top with knob maximizes interior…

250mm dia with bottom Instatherm® heated,(low voltage: 40 volts, 10 amps max.) Top is not heated, but has insulation cover. May be used as a vacuum oven at temps up to 180 degrees C continuously. The top has an observation stripe for visibility & is supplied with vacuum take-off valve. Uncoated…

The small size of this desiccator allows quick vacuum creation for rapid, repeated degassing of multiple samples. Vacuum rating of 740mm Hg (29"). Clear polycarbonate top for easy viewing of contents; white polypropylene bottom Stopcock with 2mm Teflon® PTFE plug accepts…

These clear non-vacuum desiccators are manufactured from borosilicate glass and include a borosilicate glass lid with a molded-in knob. Clear glass provides excellent visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an…

The attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs.  Durastar®…