Vacuum Jar

Compare Tool

Select up to 3 products

Vacuum Jar
1 - 30 of 30
Sort
View
Show

  • PYREX® Replacement Ring for 2.2L Desiccator

    Corning

    These PYREX® desiccator cover sleeve rings are replacements for 2.2L desiccators No. 3118-160.

  • High Vacuum Pump Deluxe Experiment Kit

    Fischer Technical

    …start teaching high vacuum in the classroom.  Demonstrate water boiling at room temperature as well as what happens to a balloon at high vacuum plus much more! Vacuum Pump Kit-, 1EA. LAV-3/G, 1EA. acrylic pump plate, 1EA. 6"X11" glass bell Jar, 5' HIGH VACUUM TUBING, 2 hose…

  • Glass Bell Jars

    Fischer Technical

    High quality glass bell jars with a glass knob at the top.  Ground flange to allow an excellent seal to vacuum pump plates. Safe at high pressures.

  • Sealing Tape

    SciSpec

    …surfaces. Can be used on the lips of flasks, test tubes, beakers, bottles, etc. Remains pliable in cryogenic, pressure and vacuum work. Good as an electrical insulator and for tightening up leaky threads. Also suitable for covering the ends of sampling tubes or across the lips of sample jars.

  • High Vacuum pump plate, Acrylic

    Fischer Technical

    Suitable for bell jars with up to 9" Diameter Flange, Complete with a shut off valve.

  • Scienceware® Space Saver Vacuum Desiccators

    Bel-Art Products

    …to prevent unnecessary turbulence. Polypropylene bottom section provides excellent chemical resistance. Polypropylene plate supplied is 1/8 inch thick with 1/8 inch diameter perforations for air transfer. Strong shatter-proof desiccator will hold a vacuum of 740 mm of Hg, for a period of 24 hours.

  • Laboratory High Vacuum Pump

    Fischer Technical

    …oil becomes milky or cloudy. High Vacuum Grease This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved. "The Tank" Oil Change System All vacuum pumps require changing oil after every…

  • Vacuum Chambers

    Thermo Scientific Nalgene

    …polyetherimide jar inverted on white polycarbonate base plate that has removable tubing adapter for connection to 1/4-inch i.d. vacuum tubing Vacuum rating 29 inches Hg @ 25°C Jar has amber cast and seals against Neoprene gasket in base Molded circular ridges on base help to center jar,

  • Polypropylene Vacuum Desiccators

    Dynalon

    Holds a vacuum of 740 mm of Hg for 24 hours Lightweight and shatterproof vacuum desiccator; lid of transparent polycarbonate Removable pan holds calcium chloride or other drying agents; is non-corrosive Does not include desiccant or plate.

  • Vacuum & Ionized Clear Straight Sided Rounds with Green Thermoset F217 & PTFE…

    Qorpak

    …removed by the Vacuum and Ionization process. V & I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust particles. Next, the air passes through an absorbent filter to remove gases. A vacuum draws the…

  • GasPak™ 100 Systems

    BD

    …exclusive BBL room temperature catalyst Uses GasPak or GasPak Plus™ hydrogen and carbon dioxide generator envelope; does not require vacuum pumps, gas tanks, manometers or pressure-reducing valves. GasPak products are utilized for the generation of anaerobic, microaerophilic or CO2…

  • Vacuum Pump Plate

    Fischer Technical

    For use with bell jars up to 9" in diameter Plate is nickel-plated steel, 1 1/2" thick, ground flat to seal Has 1/4" hose connector; vacuum release valve and rubber sealing gaskets

  • Vacuum & Ionized Clear Straight Sided Rounds with Black Phenolic Pulp/Vinyl Caps

    Qorpak

    …removed by the Vacuum and Ionization process. V & I Cleaning Process: Compressed air passes through a condensate separator and coalescing filter to remove aerosols and fine dust particles. Next, the air passes through an absorbent filter to remove gases. A vacuum draws the…

  • Gear-Drive 0.4-Liter Planetary Ball Mills

    Across International

    … Safety switch ensures automatic shut down if cover is opened during operation Note: Except stainless steel jars, all other jars must use stainless steel vacuum jackets when used in vacuum condition. Vacuum jars or jackets must be operated with a vacuum pump which sold separately.

  • PYREX® Cylindrical Jars with Recessed Handles

    Corning

    These PYREX® jars are mold-blown with substantial walls for mechanical strength and have recessed finger grips for convenience in handling. The open end of these jars is ground flat. These jars can also be used as animal jars. Do not use with heat, pressure or vacuum applications.

  • Vacuum Chambers, Base Plate

    Thermo Scientific Nalgene

    White polycarbonate Plate is 13 1/2” x 1” thick, with three concentric Neoprene gaskets, 8”, 11 1/8” and 9” o.d. Gaskets lie in channels separated by concentric ridges which serve to center and to brace rim of bell jar.

  • Vacuum Chambers, Jars

    Thermo Scientific Nalgene

    Nalge 5305 series Transparent polyetherimide with amber cast As furnished with 1577T14 and 1577T18 Bell Jars. Replacement gaskets are available.

  • PYREX Bell Jars

    Corning

    … Bottom flange has a finely ground finish to assure tight sealing with ground glass plates Dimensions (ID x OD): 1577J18 Jar: 5 1/8” x 5 1/2”; 1577J33 Jar: 6 1/8” x 6 1/2”; 1577J48 Jar: 8 3/8” x 8 3/4”. Height of jar (excluding knob) given in listings below.

  • Jar 6X8

    Corning

    … These jars are blown with walls approximately 4.5mm (3/16") thick The open ends are finished with a fire-polished bead to increase mechanical strength Other larger volume PYREX® jars (No. 6942) can also be used as animal jars Do not use with heat, pressure or vacuum applications

  • Parts & Accessories for Vacuum Pumps

    Fischer Technical

    …pressure. High Vacuum Pump Oil Fischer Technical High Vacuum Pump Oil is available by the quart in packs of two or cases of twelve. High Vacuum Grease This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be…

  • Cylindrical Jars with side indents.

    Ace Glass

    Cylindrical jars with side indents for easier handling. Made of heavy wall glass. Graduated. Also available with poly safety coating. NOTE: DO NOT USE WITH HEAT, PRESSURE, OR VACUUM APPLICATIONS.

  • Polypropylene Desiccators with Stopcock

    Thermo Scientific Nalgene

    …only and can be used with or without a vacuum. Full vacuum may be applied following supplied instructions for proper performance Polypropylene stopcock with PTFE Plug can be used with 0.25″ (6.4mm) ID tubing (tubing sold separately) Vacuum connection is located on the desiccator…

  • Gear-Drive 2-Liter Planetary Ball Mills

    Across International

    …and low noise. Vacuum jars may be used to process sample within a vacuum environment. PQ-N2 planetary ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to superimposed…

  • Gear-Drive 4-Liter Planetary Ball Mills

    Across International

    …and low noise. Vacuum jars may be used to process sample within a vacuum environment. PQ-N4 planetary ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to superimposed…

  • Gear-Drive 12-Liter Planetary Ball Mills

    Across International

    …and low noise. Vacuum jars may be used to process sample within a vacuum environment. PQ-N12 planetary ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to…

  • Gear-Drive 20-Liter Planetary Ball Mills

    Across International

    …and low noise. Vacuum jars may be used to process sample within a vacuum environment. PQ-N20 planetary ball mills have four grinding stations arranged on the "Sun Wheel" of the planetary ball mill. When the Sun Wheel rotates, the grinding balls inside the jars are subject to…

  • Thomas® Lubriseal Stopcock Grease

    Thomas®

    …anaerobic culture jars and similar utensils Its mobility in film-like quantities makes it excellent not only for lubricating, but for preventing the freezing of stopcocks, ground joints, etc., which are stored for long periods of time; also recommended for use in high vacuum systems …

  • Savant™ SpeedVac™ Refrigerated Vapor Trap Series

    Thermo Scientific

    …the oil-sealed vacuum pump. Rapid cooling time minimizes waiting period Easy to remove glass flask for quick solvent changes Rapidly cools to operating temperature Easy to use glass condensation flask allows for the collection of liquid into a self-contained jar for easy draining…

  • Fluid-Transfer Closure PP 70 mm

    Thermo Scientific Nalgene

    …size: 70mm; vacuum limit: 5in (127mm) Hg; pressure limit: 2 psig (0.137 bar) Fluid transfer closure is composed of polypropylene and is made for fluid transfer in the lab or field Autoclavable closure fits Nalgene® Mason jars or 125mL and 250mL straight-sided jars with 70mm closures…

  • Clear Straight Sided Rounds with White Metal Plastisol Caps

    Qorpak

    Clear / Flint Straight Sided Round Jars are designed without shoulders for maximum storage capacity and content visibility. Attached metal caps with a Plastisol liner offer excellent resistance to mild acids as in food products. Permits “hot fill” operations to effectively produce a vacuum seal.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.