Desiccating Chambers
Designed with an airtight seal when the lid is applied, desiccating chambers prevent moisture and humidity from entering the container. They feature transparent lids to visually inspect the contents.
Desiccant chambers have automatic hydrometers installed, allowing convenient, easy-to-read sample monitoring.
Moisture-sensitive samples can be stored in a large desiccator to prevent degradation, microbial growth, and chemical reactions when some samples are exposed to moisture.
A desiccant chamber can be a cost-effective lab solution because they can be reused.
Ideal for hydration and dehydration applications, desiccators allow for long-term storage solutions that can keep the lab tidy and provide easy access.
-
Abdos Vacuum Desiccator PC/PC
Foxx Life SciencesThese All Clear Polycarbonate (PC) Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in…
-
Mini Vacuum Desiccators
SP Bel-ArtThe small size of this desiccator allows quick vacuum creation for rapid, repeated degassing of multiple samples. Vacuum rating of 740mm Hg (29"). Clear polycarbonate top for easy viewing of contents; white polypropylene bottom Stopcock with 2mm Teflon® PTFE plug accepts…
-
This 10.5L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO. Warning: Not for vacuum applications. Do not heat…
-
Secador® 2.0 Gas-Purge Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs. Durastar®…
-
Drying Tube
W.A. Hammond Drierite Co.Indicating DRIERITE in this plastic unit dries air and gases for small scale laboratory applications. A rubber hose connection provides an immediate flow of dry gas. Note: Do not use this drier in the presence of vapors or liquids containing phosphate esters, synthetic lubricants, hydrocarbon…
-
Vacuum Tubing Kit
LabconcoDesiccator Vacuum Tubing Kit. Vacuum Tubing Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle…
-
Secador® 3.0 Gas-Purge Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs. U.S. Patents:…
-
Secador® 3.0 Vertical Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and light sensitive products. Choose from an extensive selection of sizes, styles and colors of desiccator cabinets to meet your specific dry storage…
-
Each Dricycler desiccator is supplied with an easy to read, door mounted hygrometer Double action door locks and door gasket provide an airtight and moisture-proof environment 25 to 35% or lower humidity levels are maintained 2 glass sides and glass door provide full observation of…
-
Glass Dessicators
United Scientific SuppliesThese clear non-vacuum desiccators are manufactured from borosilicate glass and include a borosilicate glass lid with a molded-in knob. Clear glass provides excellent visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an…
-
-
All the features of the Secador 1.0 desiccator cabinet Carry handle for portable convenience Double latches, two shelves Dimensions (H x W x D): 14.7" x 8.4" x 16.3" (37.3 x 21.3 x 41.4 cm); volume 0.75 ft 3 .
-
Dry-Keeper™ Desiccator with Gas Ports
SP Bel-ArtThis desiccator cabinet is ideal for creating a carbon dioxide atmosphere for tissue culture processing or flushing with nitrogen to create an anaerobic environment. Two gas ports allow the cabinet atmosphere to be rapidly and effectively flushed. The gas port stopcocks are 4mm diameter and accepts…
-
Secador® 4.0 Gas-Purge Desiccator Cabinets
SP Bel-ArtThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs. Durastar®…
-
This 5.8L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO. Warning: Not for vacuum applications. Do not heat or …
-
From streamlined contours to high-quality glass stopcocks, Borosil® Vacuum Desiccators reflect great care and attention to detail. Borosil® Desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. Porcelain plate,…
-
Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…
-
KIMAX Borosilicate Desiccators with Stopcocks
DWK Life Sciences (Kimble)KIMAX® desiccators are designed and made for durability and efficiency in daily laboratory use. Ideal for removing moisture from solids, storing hygroscopic materials, and applications requiring vacuum desiccation. Can also be used for cooling oven-dried samples while maintaining sample…
-
Abdos Plain Desiccator PP Clear Lid & White Base
Foxx Life SciencesDesiccators are enclosures containing desiccants for preserving moisture sensitive products. These desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with…
-
Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…
-
Polypropylene Desiccators with Stopcock
Thermo Scientific NalgeneClearly view contents with the transparent PC cover of the Thermo Scientific™ Nalgene™ Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room…
-
Multiple Cubicle Desiccators
Plas-LabsPlas-Labs desiccators are designed to protect, store, or assist in moving critical materials and prevent contamination. They are dust and moisture free enclosures which safeguard valuable research specimens or sensitive electronic components. Under positive N2 gas flow, they prevent moisture from…
-
Desiccator Cabinets
DynalonDesiccator Cabinet (1212U90) Product Dimensions (l x w x h) : 10.875x7.5x9.125in Desiccator Cabinet (1212U91) Product Dimensions (l x w x h) : 17.125x9.625x11.125in For dry, dust-free storage at temperatures up to 120°F for use in incubators, freezers, refrigerators,…
-
Scienceware® High Heat Desiccator Plates
SP Bel-ArtWithstand temperatures to 150°C Three diameters 4.8 mm thick These desiccator plates have excellent resistance to thermal shock, are non-combustible, asbestos free, stable and chemical resistant. Plates withstand temperatures to 150°C. Circular plates are perforated…
-
Instantly variable jacket temperature, to 200 degrees C, enables programmed drying. Instatherm coated jacket with a viewing strip for monitoring temperatures by means of an adjustable depth thermometer inserted into end, or a thermowell (6-7mm OD) may be substituted for the purpose of employing a…
-
"Space Saver" Desiccators
SP Bel-ArtMaximize your space in the laboratory or classroom. In less than 12" of benchtop space, these strong, shatterproof desiccators will provide dry storage and protection for moisture-sensitive products. ‘Flat Dome,’ clear polycarbonate top with knob maximizes interior…
-
These high-quality vacuum desiccators stay gastight allowing reliable dry storage or experiments over extended periods. Able to maintain 29in.-Hg vacuum for over 72 hours at room temperature, they provide vacuum integrity resulting in lower maintenance and greater peace of mind. Single…
-
A single, positive latch on the door furnishes a secure seal. The door-mounted dial hygrometer provides a convenient way to measure relative humidity. Drying can be accomplished with single-use or reusable desiccant (Thomas #'s 3743C20, 3743C22, 3743C05, 0211G04). An optional under-shelf…
-
Amber Desiccators
Plas-LabsPlas-Labs desiccators are designed to protect, store, or assist in moving critical materials and prevent contamination. They are dust and moisture free enclosures which safeguard valuable research specimens or sensitive electronic components. Under positive N2 gas flow, they prevent moisture from…
-
SP Bel-Art Secador Clear 4.0 Gas-Purge Desiccator Cabinet
Bel-Art - SP SciencewareThe attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs. U.S. Patents: 6,834,920;…
-
Autoclavable Polypropylene Desiccators
Thermo Scientific NalgeneView contents easily with Thermo Scientific™ Autoclavable Polypropylene Desiccators, featuring a robust body and high resistance to all solid desiccants. These desiccators have a transparent polycarbonate cover. The small size (3756C20) comes with a 140mm aluminium plate. The plate for the…
-
Desiccators, Vacuum
United Scientific SuppliesThese autoclavable desiccators are made of polypropylene and polycarbonate and can hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen…