These clear non-vacuum desiccators are manufactured from borosilicate glass and include a borosilicate glass lid with a molded-in knob. Clear glass provides excellent visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an…

In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

Maintains Relative Humidity Levels at 12 to 20%* White ABS desiccator cabinet has vertical profile and automatic dehumidification system. 120VAC electronic dehumidification system maintains relative humidity levels at 12 to 20%*; keeps dry air circulating throughout the cabinet; 15…

Large interior volume provides maximum interior clearances Clear polycarbonate top and white polypropylene bottom have extra heavy walls to eliminate danger of implosion All clear versions for easy viewing Polypropylene stopcock has a Teflon® plug which turns easily, allowing a…

The Vacuum Desiccator is a molded polyethylene cabinet having one cubic foot of interior space that provides a low humidity environment for the storage of anhydrous, hygroscopic biological and chemical compounds. Features a leak-resistant chemical-resistant gasket for an excellent seal. A 3-way…

In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

These PYREX® desiccator cover sleeve rings are replacements for 2.2L desiccators No. 3118-160.

These high-quality vacuum desiccators stay gastight allowing reliable dry storage or experiments over extended periods. Able to maintain 29in.-Hg vacuum for over 72 hours at room temperature, they provide vacuum integrity resulting in lower maintenance and greater peace of mind. Viton®…

Stack up to Five Units Perforated shelves are movable to suit your dry storage needs in this desiccator cabinet that stacks up to 5 units high. Smoke-tinted, polystyrene Two removable shelves can be set at four heights Pull down door slides out of the way into a compartment…

These high-quality vacuum desiccators stay gastight allowing reliable dry storage or experiments over extended periods. Able to maintain 29in.-Hg vacuum for over 72 hours at room temperature, they provide vacuum integrity resulting in lower maintenance and greater peace of mind. Single…

Ideal for vacuum drying, degassing and teaching demonstrations, this vacuum chamber can withstand a full vacuum at room temperature. One piece O-ring seals the clear polycarbonate top to white polycarbonate base plate Polypropylene stopcock with Teflon® PTFE plug and tapered hose…

Maintain an airtight seal on the Thermo Scientific™ Nalgene™ Transparent Polycarbonate Classic Design Desiccator without the need of vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum…

This 10.5L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO. Warning: Not for vacuum applications. Do not heat…

Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…

A door-mounted dial hygrometer permits relative humidity inside the cabinet to be conveniently monitored. The unit features convenient handles making it very portable. The instrument comes with a pair of adjustable, vented shelves. Bottom-hinged door opening is: 22.5 cm H X 41.7 cm W (16.4" H…

Extra-large Scienceware® desiccator cabinet provides a low humidity, dust free environment for several large containers or a lot more small ones! Clear on all sides for quick visualization of desiccator contents Rugged copolyester side and top panels and polycarbonate door and rear…

The door seals against a foam rubber gasket and is held closed with two roller latches. The open door glides underneath the cabinet to maintain the cabinet's small footprint. Dimensions: 21 x 18 x 13cm (81/4 x 7 x 5") I.D. door opening 19 x 11cm (71/2 x 43/8"). A jar of silica gel…

This 5.8L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO. Warning: Not for vacuum applications. Do not heat or …

250mm dia with bottom Instatherm® heated,(low voltage: 40 volts, 10 amps max.) Top is not heated, but has insulation cover. May be used as a vacuum oven at temps up to 180 degrees C continuously. The top has an observation stripe for visibility & is supplied with vacuum take-off valve. Uncoated…

Plas-Labs desiccators are designed to protect, store, or assist in moving critical materials and prevent contamination. They are dust and moisture free enclosures which safeguard valuable research specimens or sensitive electronic components. Under positive N2 gas flow, they prevent moisture from…

This 2.4L PYREX® desiccators has a rugged 24/29 Standard Taper external sleeves with tooled hose connections that serve as the stopcock. It is designed so that its manipulation is not affected by the vacuum. The open position is indicated by the molded arrow on the cap. A quarter turn from this…

The small size of this desiccator allows quick vacuum creation for rapid, repeated degassing of multiple samples. Vacuum rating of 740mm Hg (29"). Clear polycarbonate top for easy viewing of contents; white polypropylene bottom Stopcock with 2mm Teflon® PTFE plug accepts…

Color-indicating silica gel beads for use in refilling the Secador® auto-desiccator module. Unlike other desiccants, silica gel is non-friable and won’t disintegrate into powder even after repeated regeneration. Absorbs moisture from the air Inert, non-toxic and non-corrosive …

65-liter capacity Holds items up to 18” high or wide Ample quantities of standards, samples, electronics or other high value items can be safeguarded in the new Secador Techni-Dome Vacuum Desiccator. The largest domed desiccator of its kind, this patented model offers up to 4 times…

Achieves a vacuum of better than 200” H₂O with built-in pump Keep materials dry Three sizes Diameter is 4 1/8” Can be used to ship samples

A green light turns on for the drying cycle for a 41/2 hour absorption period, and a red light lights up, indicating 1/2 hour regeneration of the desiccant. This cabinet attains relative humidity levels of 30-40%. Includes two adjustable shelves. The unit draws 6 watts, 120VAC. Clear…

Terra Universal's SmartDesiccator maximizes yields of sensitive materials by automatically maintaining a user-determined humidity set point. First-of-its-kind SmartDesiccator cuts nitrogen expenses by up to 78% Automates clean, dry benchtop storage to eliminate moisture-related…

This 2.4L PYREX® desiccators is designed for general analytical work. The sturdy knob makes the cover easy to handle. Approximate bowl volume is 2400mL. For replacement cover, see No. 3081-150CO. For lower part only, see No. 3081-150LO. Warning: Do not heat or subject to pressure. Not for…

Stainless Steel Desiccators Provide Cleanliness, Convenience, Economy They feature transparent front and back windows for great visibility of stored materials; select either safety glass or Static-Dissipative PVC to suit your application. The front door features a full-height hinge. Each…

Protecting valuable humidity-sensitive items, such as reagents or electronics, is easy and fully automatic with Secador® Auto-Desiccator Cabinets. The patented, electronic desiccant regeneration module recharges the desiccant every 20 minutes. Compared to other auto-desiccators that regenerate…

View contents easily with Thermo Scientific™ Autoclavable Polypropylene Desiccators, featuring a robust body and high resistance to all solid desiccants. These desiccators have a transparent polycarbonate cover. The small size (3756C20) comes with a 140mm aluminium plate. The plate for the…

Top used with 3756H10 and 3756C60 Dessicators Transparent PC cover and PP base will not shatter or implode at full vacuum when used properly Desiccator body is resistant to solid desiccants, including acids and alkalines Convenient vacuum connection on body makes cover easy to handle …