Vacuum Desiccators

Desiccator with lid and ceramic plate.

Holds a vacuum of 740 mm of Hg for 24 hours Lightweight and shatterproof vacuum desiccator; lid of transparent polycarbonate Removable pan holds calcium chloride or other drying agents; is non-corrosive Does not include desiccant or plate.

…Borosil® Vacuum Desiccators reflect great care and attention to detail. Borosil® Desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. Porcelain plate, ground glass flanges. Rated to 9.6 PSI vacuum when…

The small size of this desiccator allows quick vacuum creation for rapid, repeated degassing of multiple samples. Vacuum rating of 740mm Hg (29"). Clear polycarbonate top for easy viewing of contents; white polypropylene bottom Stopcock with 2mm Teflon® PTFE plug accepts…

These All Clear Polycarbonate (PC) Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the…

Vacuum desiccators are molded with high-quality plastics which are light and easy to handle. Silicone O-ring assures tight seal down to 0°C without using grease. Bottom part of the desiccators comes with thick perforated polypropylene disc with big holes in the middle for easy lifting. …

…to prevent unnecessary turbulence. Polypropylene bottom section provides excellent chemical resistance. Polypropylene plate supplied is 1/8 inch thick with 1/8 inch diameter perforations for air transfer. Strong shatter-proof desiccator will hold a vacuum of 740 mm of Hg, for a period of 24 hours.

…Vacuum Desiccator. The largest domed desiccator of its kind, this patented model offers up to 4 times more volume, 65 liters (4,000 cu. in.) than most other large benchtop units. With space for items up to 18” (45 cm) tall or wide including racks, trays and instruments, this Vacuum Desiccator…

…vacuum capability with virtually no leakage and exceptional durability Cabinet style desiccator provides maximum useable space and is stackable Viton® 3-way valve offers consistent and uniform vacuum draw, vacuum release, or gas exchange Analog vacuum gauge in front door of desiccator…

…allows quick visualization of the desiccator contents Locking ring secures top and bottom halves when vacuum not in use; provides additional convenience and safety when moving the unit Includes desiccant tray (desiccants sold separately) Use with any vacuum with free air capacity of 1.5…

…hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen minutes. Non-vacuum desiccators are physically the same as vacuum desiccators; only…

These autoclavable desiccators are made of polypropylene (PP) and polycarbonate (PC) and can hold a vacuum up to 740mm Hg for 24 hours without any greasing. Autoclavable at 120°C for 15 minutes. The top dome, molded in rigid and transparent PC, gives a crystal-clear view of the sample. The…

…hold vacuum up to 740mm Hg for 24 hours without any greasing. The PP stopcock has a self lubricating PTFE plug that works to create the vacuum, shut it off and release it. Autoclavable at 120°C for fifteen minutes. Non-vacuum desiccators are physically the same as vacuum desiccators; only…

…Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room temperature use only and can be used with or without a vacuum. Full vacuum may be applied…

…Borosil® Non-Vacuum Desiccators reflect great care and attention to detail. Supplied with a porcelain plate and ground glass flanges, these desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. A Available in inner…

KIMAX® desiccators are designed and made for durability and efficiency in daily laboratory use. Ideal for removing moisture from solids, storing hygroscopic materials, and applications requiring vacuum desiccation. Can also be used for cooling oven-dried samples while maintaining sample dryness.…

…vacuum grease which can act as a possible lab contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum conditions, and is an excellent alternative to glass. Wide base provides superior stability Similar in dimensions to glass desiccators…

…Blocking Amber Non-Vacuum Desiccators reflect great care and attention to detail. Supplied with a porcelain plate and ground glass flanges, these desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. Available in inner…

…affected by the vacuum. The open position is indicated by the molded arrow on the cap. A quarter turn from this position closes the desiccator. For ease in use and improved performance, it is recommended that the Standard Taper sleeve be lubricated with a silicone-based vacuum grease. The tubulation…

…negative pressure vacuum within the desiccator and expand under ambient atmospheric pressure. Per each Quickly corroborate that a vacuum exists within a Space Saver Vacuum Desiccator • No tools needed to install between the outlet and stopcock Know at a Glance Whether Your Desiccator is Under Vacuum

Desiccator Vacuum Tubing Kit. Vacuum Tubing Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle…

VACUUBRAND Diaphragm Vacuum Pumps are sized for use with CentriVap Centrifugal Concentrators, RapidVap Vacuum Evaporation Systems and Vacuum Desiccators and have uses with many other pieces of laboratory equipment that require a vacuum source. The wetted parts of these pumps are PTFE coated for…

…a vacuum of up to 25 microns is desired.  The pumps use High Vacuum pump oil (one quart included) and are designed to run on a closed system.  The vacuum should not be regulated, but rather these pumps should be used with vacuum ovens, desiccators, etc where a consistent, high vacuum is…

…volts, 10 amps max.) Top is not heated, but has insulation cover. May be used as a vacuum oven at temps up to 180 degrees C continuously. The top has an observation stripe for visibility & is supplied with vacuum take-off valve. Uncoated top available. All codes include a 9698-20 connecting…

Affordable Model 2019 vacuum pump is durable and chemcial resistant. Use Model 2019 for vacuum filtration, desiccation, degassing, and other mid-range vacuum applications. Free air flow 37L/min; Maximum vacuum 24" Hg. Pump can also be used to pressurize up to 18 PSIG. Comes standard with…

…implode at full vacuum when used properly Desiccator body is resistant to solid desiccants, including acids and alkalines Convenient vacuum connection on body makes cover easy to handle Straight-bore design eliminates stopcock leakage No gasket necessary, no need to draw a vacuum to make cover…

…tall or wide. Unlike present small dome-shaped vacuum desiccators, the Secador® Techni-Dome® Vacuum Desiccator has space for multiple plates, racks, trays and instruments. Contents can be viewed from 360º through the desiccator's transparent polycarbonate top and bottom. This…

Ideal for vacuum drying, degassing and teaching demonstrations, this vacuum chamber can withstand a full vacuum at room temperature. One piece O-ring seals the clear polycarbonate top to white polycarbonate base plate Polypropylene stopcock with Teflon® PTFE plug and tapered hose barb…

…PILOT5000 and PILOT5000C-02 diaphragm vacuum pump are durable and chemical resistant. All contact surfaces are PTFE coated. They come with a liquid inlet trap and vacuum regulator making it a perfect choice for vacuum filtration, desiccation, and other mid-range vacuum applications. The TLD5000 and…

… Desiccation Microbiology Replace water aspirator Aspiration Degassing Vacuum drying Fume suction The PILOT3000 is equipped with a 1/7 hp motor and provides a maximum 20 L/min (115V/60Hz) of free air displacement and 22 in-Hg of maximum vacuum. The pump features a vacuum…

This desiccator cabinet is ideal for creating a carbon dioxide atmosphere for tissue culture processing or flushing with nitrogen to create an anaerobic environment. Two gas ports allow the cabinet atmosphere to be rapidly and effectively flushed. The gas port stopcocks are 4mm diameter and accepts…