Glass Desiccator

…Borosil® Non-Vacuum Desiccators reflect great care and attention to detail. Supplied with a porcelain plate and ground glass flanges, these desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. A Available in inner…

…Blocking Amber Non-Vacuum Desiccators reflect great care and attention to detail. Supplied with a porcelain plate and ground glass flanges, these desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. Available in inner…

The Denville microscope cover glass measuring 24 mm x 40 mm, is suitable for research and laboratory use. Our microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking

…high-quality glass stopcocks, Borosil® Vacuum Desiccators reflect great care and attention to detail. Borosil® Desiccators are perfect for drying, and for storage of moisture-sensitive substances. Compatible with any common desiccant. Porcelain plate, ground glass flanges. …

… 2 glass sides and glass door provide full observation of contents Durable stainless steel cabinet will not warp, giving years of dependable service 3744H45 and H50 include a stainless steel shelf Automatic desiccator cabinets eliminate the need to manually change desiccant…

…corrosion-resistant, inert, non-stick glass surfaces bonded to metal Marked with numbered quadrants for easy location of crucibles and other containers, allows use by several people Diameter 9 inches; fits 3756H10 and standard 9 inch Desiccators (230 mm) Also available in 140 mm diameter…

…including racks, trays and instruments, this Vacuum Desiccator provides for much more storage in a single chamber than traditional plastic or glass vacuum desiccator units. All contents can be easily viewed through the desiccator's clear polycarbonate top and bottom. This laboratory grade…

These clear non-vacuum desiccators are manufactured from borosilicate glass and include a borosilicate glass lid with a molded-in knob. Clear glass provides excellent visibility and can be autoclaved. The rims of the desiccator and lid are ground glass and require greasing before use to create an…

…contaminant. Lightweight and nearly unbreakable, the desiccator can be used under full-vacuum and non-vacuum conditions, and is an excellent alternative to glass. Wide base provides superior stability Similar in dimensions to glass desiccators but more cost-effective Includes ports on…

…of the Thermo Scientific™ Nalgene™ Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room temperature use only and can be used with or without…

Kemtech America Cover Glass in White Glass. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.

Excellent Quality Borosilicate 3.3 and Super White Glass Available 0.13-0.16mm Thick Three sizes available (24x40, 24x50, 24x60) Individually wrapped by aluminum vacumm pack w/ desiccant 1oz Hinged Lid Box

Our Thomas® microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking. Available in two thicknesses: No. 1: 0.14mm No. 1.5: 0.175mm Pack and Case: 1/Pk = 1 ounce …

…moisture when using crucibles, weighing bottles, and watch glasses. Plastic screw-thread top cap for easy cover removal Recessed base for containment of desiccant Includes metal plate Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type II, requirements…

…crafted construction. Fabricated from stainless steel and glass Superior seal integrity Rigid door full length door hinges One piece neoprene door gasket Shelves are adjustable in half-inch increments Two different sizes to select from Automatic desiccant regeneration available

…dryness. The shape of the body allows easy removal of desiccant materials Simplified stopcock design minimizes chipping or marring of critically ground finishes during cleaning and assembly Valve is secured to the desiccator lid by a neoprene grommet located in the knob of the cover …

…moisture absorption Desiccant can be easily regenerated by heating cartridges in a 50ºC (122ºF) oven overnight or at 100ºC (212ºF) for 6 hours For more rapid drying, remove the membrane lid, transfer the spent gel crystals into a glass or porcelain dish, and place…

…oven at temps up to 180 degrees C continuously. The top has an observation stripe for visibility & is supplied with vacuum take-off valve. Uncoated top available. All codes include a 9698-20 connecting controller cord. Code -10 is complete with a 8294-15 thermometer and 5272-17 10/30 glass adapter.

…apparatus with a 57mm flat o-ring connection between the desiccant flask and the drying chamber to permit easy sample removal after drying. The drying chamber has an I.D. of 2” and is 8” long. The desiccant flask has a 4mm glass stopcock and a serrated connection for the vacuum source.…

Formula: Mg(ClO4)2 Formula Weight: 223.21 CAS Number: 10034-81-8 Specific Gravity: 1L = 2.60 Kg

For lubricating ground glass joints, glass stopcocks and valves, Tensette Pipets, and for sealing desiccators. Lubricant has low vapor pressure and resists attack by acidic and alkaline solutions. Hach products are intended for sale/shipment within the US only. International customers…

CAS: 63231-67-4 EC No: 231-545-4 MDL No: MFCD00011232 Solid Melting Point: >1600° Boiling Point: 2230°

Formula: SiO₂ Formula Weight: 60.09 CAS Number: 63231-67-4 Synonym(s): Amorphous Silicon Dioxide

CAS Number: 1343-98-2 Specific Gravity: 1L = 2.10 Kg

CAS Number: 1343-98-2 Specific Gravity: 1L = 2.10 Kg

Kemtech America Cover Glass in Boro 3.3. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.

Vacuum. Desiccant tube has two-way action that permits the use of a smaller desiccant volume and better air contact with desiccant. During the final stage of drying, the T-bore stopcock is turned so that the evacuation path is directly over the desiccant, while in the early stages the desiccant is…

…the with a 60mm I.D. flat flange and a quick release stainless steel clamp. on drying chamber has a groove for a silicone O-Ring to make a leak-tight flat flange on desiccant tube. Joints on condenser and flask are 24/40. item consists of condenser, drying chamber, desiccant tube, flask, and O-Ring.

…thermowell (6-7mm OD) may be substituted for the purpose of employing a thermister, controller probe, etc. The 40/35 joint is PTFE-Clad, the outer member polished, thus avoiding the use of grease. The desiccant tube is improved with joint reversed. The heater operates on AC or DC up to 40v, 3 amps.

These U-shaped borosilicate glass drying tubes have a Standard Taper joint at one end and are designed to avoid desiccant contact with reaction. Other end is open to receive size a #2 rubber stopper with bent inlet tube (included).

…No. 0 is 0.085 to 0.13 mm; No. 1, 0.13 to 0.17 mm Lint-free plastic boxes with hinged lid. Cover glasses are packaged 1 oz. per box; case contains 10 boxes. Cases are wrapped in plastic and foil to seal out moisture. Bags of desiccant are packed within the case to absorb interior moisture.

…for drying samples at a temperature as a function of the solvent boiling point. The desiccant flask has a 34/45 outer joint for connection to the drying chamber. All other joints are 24/40. Complete apparatus consists of a desiccant flask, drying chamber, round bottom flask and Allihn condenser.