3 Ml Tube

Compare Tool

Select up to 3 products

3 Ml Tube
1 - 32 of 732
Sort
View
Show
  • tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL

  • …target in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are made of a tough, transparent and specially formulated polypropylene for better sample viewing and overall strength. These tubes are designed with thicker walls…

  • …with all SSI screw microtubes with 0.5, 1.5 and 2.0 ml nominal volumes, in conical and free-standing (skirted) base designs In conjunction with SSI microtubes, all caps can be centrifuged to over 20,000 in a rotor with appropriate support. Tubes and caps can be autoclaved and are suitable for…

  • Lichrolut® columns are designed for reliable and rapid solid phase extraction. This is achieved by using strong but reversible interactions between the analyte and the surface of the stationary phase. A variety of surface modifications allow non-polar extractions (Lichrolut® RP18 and RP18e), polar…

  • 5 mL Centrifuge Tube Rack

    Bel-Art - SP Scienceware

    Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…

  • These 100mL PYREX® pear-shaped centrifuge tubes are used for determination of water and sediment in petroleum products. They are fabricated from mold-blown blanks to insure uniform shape and greater mechanical strength. The scale and figures are durable white enamel which stand out clearly against…

  • Maxisorp Tube, 75 x 12,000

    Thermo Scientific Nunc

    Clear polystyrene, treated to ensure a high and uniform binding of proteins and immunoglobulins For solid-phase assay techniques such as RIA and ELISA Other specifications are the same as tabulated for 9220B25

  • tubes are also useful for collecting and transporting biological specimens. Leakproof characteristics are ensured by a flat top plastic screw cap with an inner sealing lip. Tubes are made of translucent polypropylene or optically clear polystyrene with molded graduations from 2.5 to 50 ml.

  • tubes our #1 seller. Tubes seal easily with a distinct "click" and stay closed through incubation, freezing and boiling procedures. The unique closure system provides a tight seal that is actually strengthened by internal pressure. It will withstand boiling for 5 to 10 minutes. These tubes

  • …highest quality, virgin, single melt polypropylene Our latest design incorporates over 20 improvements that have made these tubes our #1 seller. The tubes seal easily with a distinct "click" and stay closed through incubation, freezing and boiling procedures. The unique closure…

  • …One sampler has three tube adapters compatible with 12mL, 20mL, or 60mL polypropylene SPE tubes. Simultaneous extraction of 12 samples on a 12-port Visiprep manifold requires four of these samplers. The other sampler has four tube adapters for 3mL or 6mL SPE tubes. To simultaneously extract…

  • Tube 10 ml

    Corning

    tubes are used in connection with the Wasserman test. Also used to measure H2O content and potassium ions in oil muds. API RP 13B standard testing method. They are graduated in 0.1 mL divisions up to 4 mL, and 0.2 mL divisions from 4 to 10 mL Tolerances: to 0.5 mL ±0.02 mL; 0.5 to…

  • Tube 40 ml

    Corning

    …centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity these heavy duty tubes. Tubes have a short…

  • Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid

  • …highest protein yields. Eliminates unneccesary transfer and minimizes contamination by filtering directly into a 50-mL centrifuge tube. The polypropylene centrifuge tube is supplied with an individually wrapped cap for storage. Funnel size is 150 mL. Case of 12 includes two centrifuge tube stands.

  • Tube 50 ml

    Corning

    Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of ac

  • Interlocking 20-Place Tube Racks

    Heathrow Scientific

    … Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to be held more securely while wearing gloves. Large, easy-to-read numbers identify tube holes to simplify…

  • Tube 100 ml

    Corning

    …centrifuge tubes are useful for the handling of sputum specimens. Digestion, shaking, neutralizing and centrifuging can be performed in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature and steam. These tubes have a white…

  • Labtop and Test Tube Coolers

    Thermo Scientific Nalgene

    …inserts to convert 1.5-ml holes to accept 0.2- to 0.5-ml microcentrifuge tubes. Excellent for transporting samples in vacutainers in hospitals and clinics. Coolers accommodate tube height up to 125 mm when lid is latched. Both accommodate cryogenic vials and 0.2- to 2.0-ml microcentrifuge tubes.

  • The ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous…

  • …Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2 to 2 in 1/10, from 2 to 3 in 1/5, from 3 to 5 in 1/2, from 5 to 10 in 1, from 10 to 25 in 5 and at 50, 75, and 100 Dimensions: 37 mm o.d. x 200…

  • Tube Culture Graduated 10ml

    DWK Life Sciences (Kimble)

    KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

  • Tube Test Grad 10ml

    DWK Life Sciences (Kimble)

    Reinforced bead top Scale is a permanent brown stain Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Conical Tube Adapter

    Thermo Scientific Nalgene

    Fits 35 mL conical Oak Ridge tubes Polycarbonate Easily removed from rotors after use

  • Tube Centrifuge 50ml

    DWK Life Sciences (Kimble)

    …50 ml KIMAX tube has a short tapered bottom. Graduated and calibrated to contain. The top end has a pour spout. Scale, legend and marking spot are durable white ceramic enamel. 50ml total capacity; graduated from 0-10 ml in increments of 0.5 ml and from 10-50 ml in increments of 1 ml

  • 50mL Tube Rack

    Alpaqua Engineering

    6-position tube rack for 50 ml centrifuge tubes with conical bottoms. SBS compliant.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.