Graduations on clear tubes are printed in bold easy-to-read black ink and are accurate to ± 2% 50mL clear tubes include a black printed 50mL graduation line and 1, 2 and 3mL graduations molded into the conical bottom Large white marking area provides excellent contrast for…

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

Easily color code samples for quick identification, customization and to increase productivity Assorted colored cap tubes come with a free reusable plastic rack (Part numbers 229419 & 229429) Graduations are printed in bold easy-to-read black ink and are accurate to ± 2% Large…

Fits small and large pipets Filler features a white ABS attachment containing a silicone conical adapter that gently seals around pipets without twisting. Pipet does not contact hard plastic, which reduces the risk of cracking and chipping. Just squeeze the bulb, press pipet lightly into…

The easy way to order Gilson Pipetman® Tips. Each box contains 1,000 tips (5 bags of 200 tips/bag or 1 bag of 1000 tips)—except for the D10mL tips, which contains 200 tips (4 bags of 50 tips/bag). Bulk Packs are sealed with a tamper-proof strip which can easily be opened for quick access to…

Printed Graduations (with marking area) Polypropylene tube and high density polyethylene cap High centrifugal strength - up to 10,000 x g Flat markable cap with leakproof seal One-hand operation design for the caps provides easy handling Sterilized by E-Beam DNase, RNase and pyrogen free

The Endoch centrifuge tube is sterilized in nature to prevent any cross contamination in the event of transportation of samples. Polypropylene construction of the tube offers added strength.

labForce® Ultra-High-Speed 15mL & 50mL Centrifuge Tubes have been designed for high speed centrifugation and meet the demands of the most crucial scientific work. Produced using premium grade USP Class VI resins in an automated, touch free manufacturing process that provides both ultimate…

Globe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…

Inversion Polarimeter Tubes Glass, approximately 9 mm i.d., with threaded, metal ferrule litharge-sealed to tube at each end Metal, cover-glass retaining caps, threaded to attach to ferrule Cap diameters closely controlled to ensure concentricity of tube with optical path in polarimeter …

High temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Sterile Assemblies packed in self-standing re-sealable bags offer a unique storage solution Grip band tubes feature ribs that provide exceptional gripping surface…

High temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation Graduated tubes have markings every 100µL for…

These polypropylene tubes feature a screw top with easy to read black graduations. These sterile, conical bottom tubes also feature a writing area to allow for easy sample identification. Temperatures between 0-40degrees Celsius are the suggested working range.

Made of polypropylene Having all the advantages of our popular T341T Series, the specially formulated polypropylene used to manufacture these tubes provides a low adhesion surface to obtain maximum sample yield. Ideal for research procedures such as nucleic acid amplifications, protein work…

601201 / 602201 NEST centrifuge tubes feature black printed graduations and a large white marking field. Premium  Meet the requirements of analytical level  High strength non-toxic materials  Raw material comply with USP VI requirements Standard &…

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

The Flip-Top centrifuge tube offers a hinged flip top cap that allows for single handed opening and closing. The attached cap provides less chance of dropping or losing a separate cap. Chloroform resistant graduations and frosted writing area allows for permanent identification and labeling.…

These sterile disposable plastic loops and needles are designed for use in quantitative procedures such as sampling, urine counts and serial dilutions, as well as for bacterial inoculation. Because they are pre-sterilized and designed for single use, t

Samples of proteins, other biological molecules, and cell cultures are commonly shipped and stored on dry ice, putting them at risk of acidification by up to 2.5 pH units. In standard centrifuge tubes, CO2 vapor from dry ice enters the tube headspace and causes a significant drop in the pH of the…

Micro Centrifuge tubes are available in three sizes; 0.5ml, 1.5ml and 2.0ml. CELLTREAT Micro Centrifuge tubes have an attached flat top cap, engraved graduations and are manufactured from high quality polypropylene. The tubes have a temperature range of -80°C to 120°C. CELLTREAT Micro…

Economical, non-sterile without printing or graduations Deep-skirted screw closure design minimizes risk of contamination Self-standing without a holder; conical bottom allows complete sample retrieval Externally-threaded polypropylene vials and high-density polyethylene closures minimize…

Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…

If you're tired of inferior tubes, try these... the most consistent, highest quality microtubes on the market! Using high quality polypropylene resin enables us to tightly control tube wall thickness, the consistency of the cap fit, and deliver superior clarity. We QC the tubes to…

Virgin polypropylene construction Fit 80 well freezer racks Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while…

Hinged flip cap for single-handed opening Chemical-resistant Leakproof Sterile EZ Flip™ Conical Centrifuge Tubes feature a patented closure system that allows one-handed opening and closing without compromising aseptic conditions. Manufactured to exacting tolerance,…

15mL & 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes…

These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…

Microcentrifuge tubes fit all standard microcentrifuges and cover a range from 250 µl to 1.8 mL. Tubes come in variety of material options and different styles, such as standard, thin-wall or graduated.  Polypropylene tubes withstand up to 11,600 × g and polystyrene tubes…

15mL graduated conical tube. Great for use as a general purpose tube.

Homogenize cells or resuspend precipitates such as protein or DNA pellets. Certified free of RNase, DNase, DNA, PCR inhibitors and tested pyrogen-free.

Polypropylene Non pyrogenic RNase-free and DNase-free Large, white marking spot Flat topped, bright green colored caps Bulk and styrofoam racked options Sterile and non sterile options Disposable Tube: Polypropylene (PP), Color - Natural Cap: High Density Polyethylene…

Polycarbonate open-top tubes have outstanding mechanical strength. Excellent for whole cell separations. For use up to 6,000 x g in refrigerated or non-refrigerated centrifuges. Translucent polypropylene copolymer has excellent chemical resistance. For low-speed centrifugation up to 6,000 x g. Both…