Sterile, Wipers
-
SATPAX® 670 Sterile Wiper
BerkshireGamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO guidelines. The wipers have a higher saturation level to support the critical solution contact time needed in the regulated industries. 55% cellulose / 45% polyester…
-
Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…
-
Pharma-Wipe™ Sterile
Acute CareValidated Sterile 9" x 9" Polyester/cellulose Dry wiper ISO Class 5 Low endotoxin 25 Bag x 72 Bags/Case - QTY 1800 Validated Sterile 12" x 12" Polyester/cellulose Dry wiper ISO Class 5 Low endotoxin 12 Bag x 6 Bags/Pack x 7 Packs/Case - QTY 1050
-
SATPAX® 1200 Sterile Wiper
BerkshireGamma irradiated and validated sterile to a Sterility Assurance Level of 10-6 in accordance with ANSI/AAMI/ISO American National Standards and European Standards EN1174 and EN552. These pre-wetted sterile wipers are ideal for aseptic environments and support areas where microbial exclusion is…
-
Polynit Wipes
ContecThe Polynit Wipe is made from filament polyester and is knitted in a special stitch which reduces degradation of the wipe and subsequent particle generation. The Polynit Wipe is specifically designed for ISO Class 5 or cleaner environments and is exceptionally low in particles and extractable…
-
Cobalt Blue Sterile Dry Wipes, ISO Class 5
High Tech ConversionsValidated Sterile Poly-Cellulose Blend ISO Class 5 (100) Cleanroom Wipe Cobalt Blue Sterile Cleanroom Wipes are validated sterile, durable, abrasion resistant, absorbent, and virtually free of particle generation. These dry sterile cleanroom wipes are comprised of a synergistic blend of…
-
STERILE 70% DENATURED ETHANOL CS/12
ITW TexwipeSterile 70% Denatured Ethanol TX3265 Sterile, ready-to-use 70% denatured ethanol (EtOH) solution designed especially for cleanroom use. Filtered to 0.2 µm, individually double-bagged and gamma-irradiated to ensure sterility. Made using USP components and packaged in an ISO Class 5 cleanroom.
-
TechniCloth wipers pre-wetted with 70% isopropyl alcohol and sterilized Sterile TechniSat is constructed from a hydroentangled polyester/cellulose blend that is pre-wetted with 70% isopropyl alcohol and packaged in a resealable flexpack. Each package is gamma irradiated to 10‰ÛÒ6 Sterility…
-
HYPO-CHLOR Wipes
Veltek AssociatesHYPO-CHLOR® Wipes are superior saturated sodium hypochlorite wipes used for both aseptic and non-aseptic wipe downs of filling and packaging machinery, surfaces, lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The unique and patented Asepti-Fill system assures…
-
Texwipe™ Sterile AlphaSat™ with AlphaSorb™ HC Cleanroom Wipers Presaturated with 70% IPA
-
Contec’s PROSAT® Sterile™ Polypropylene Low Endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. …
-
PROSAT Quiltec® I Wipes
ContecPROSAT®, Quiltec® I wipes, presaturated with 70% IPA/30% DI Water, 12" x 12" (30 x 30cm), sterile Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for…
-
-
55% cellulose / 45% polyester hydroentangled nonwoven No secondary binders Gamma irradiated and sterile validated to a 10-6 Sterility Assurance Level per AAMI guidelines Header style packaging with Package Integrity testing Lot number on each pack Certificate of Sterility with each case…
-
Tekniclean polyester knit wipes are made with a hi strength continuous filament polyester yarn in a double knit, no run interlock pattern. A unique quilting pattern is used in the 2-ply polyester wipes for optimum contamination & liquid holding capacity, resulting in the most absorbent, clean…
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
ReFIBE Wipes
ContecContec’s ReFIBE wipes are made from 100% recycled plastic bottles making them a sustainable single-use option for critical manufacturers in the Life Sciences, Pharmaceutical, Medical Device, and Semi-Conductor industries. The revolutionary recycling process converts post-consumer plastic to…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
SilSat™ Silicone Wipes
Micronova ManufacturingMicronova™ SilSat™ Wipe is a polyester wipe impregnated with a blend of medical grade silicone and IPA. Will lubricate gaskets and seals in isolators, refrigerators and cabinets in aseptic processing and support areas. Packaged 8 wipes to a pouch. Irradiated.
-
-
PROSAT® Sterile™ PS-7030IR Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean and strong. The wipes are very low in particles, fibers, and extractables. PROSAT®…
-
Textured 100% polyester no-run knit wipes with heatsealed edges Laser-cutting seals fibers at wipe's edge and allows for 100% utilization of wipe Laundered and packaged in a ISO Class 4 cleanroom Extremely low in particles, fibers and non-volatile residues (NVRS) Good…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for…
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
Decon Clean Wipes, sterile
Veltek AssociatesResidue remover and cleaner RTU wipe, 12×12 DECON-CLEAN saturated wipes are designed to remove residue left behind from disinfecting agents. Use for aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel, Lexan, polycarbonate, glass, and any critical…
-
Process2wipe IPA70 Zip-Lock Style Packaging
Veltek AssociatesProcess2Wipe saturated wipes are designed for aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel surfaces, Lexan, polycarbonate, glass, and any critical surfaces that require cleaning. The 100% continuous polyester fiber is clean and absorbent
-
-
PROSAT Wipes with CyQuanol
ContecPROSAT® Wipes with CyQuanol™ are intended for Life Science cleanroom manufacturers who want to effectively maintain cGMP compliance by maximizing efficiency and minimizing inconsistency in their contamination control process. PROSAT Meltblown Polypropylene Wipes with CyQuanol provide a…
-
Purity Polyester knit wipes are versatile and critically clean, combining low particle generation and reduced extractables with knit durability—all in one economical package. Available validated sterile for uncompromising purity. Recommended for ISO 4–7 controlled…