Heavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.

Molded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.

This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

Made of steel wire, zinc plated. Stand has a heavy wire gauze top. Overall height is 5" to accommodate all sizes of burners. Available with or without a ceramic center on wire gauze top.

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Self closing brass test tube clamp with finger grips and without finger grips

This deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.

Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

Support rings with clamp, cast iron.

The A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.

Clamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.

These stamped steel bases feature an added steel plate on the back which makes them about 50% heavier than regular stamped steel bases. The steel plate also facilitates a sturdier threading of the rod into the base.

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

Suspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.

This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long including 10 rods that are 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast…

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.

This sinc plated stamped steel burette clamp has a steel thumbscrew and can be used with rods up to 3/4" in diameter. The distance between the two burettes is 7.25"

Tall form clear quartz glass crucibles are ideal for applications that require ashing of samples. Quartz material offers low expansion, dimensional stability, and thermal shock resistance. Can withstand a continuous operating temperature of 1050°C (1922°F). Lids are also manufactured from quartz…

These non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.

Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

These support stands with rods come complete with a stamped steel base with black enamel finish and a removeable zinc plated steel rod.

Heavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is…

This silicone flask stand can support round bottom flasks as large as 2000 mL, as well as other items like beakers and dishes. The stand has 12 molded-in steps to provide a secure grip for a wide range of flasks. The silicone material that is heat resistant to 250° C. Flask stand…

This Lattice Lab System features an assortment of aluminum rods from 18" to 48" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

This stand is ideal for use with alcohol burners. The base is made from 3/16" stainless steel rod with a plated steel mesh top. The stand can be used in either high (5") or low (4") position.

This apparatus is useful for holding objects that are too large for standard clamps, such as glass distillation columns and odd shaped glassware. Chain and support band are made of strong chrome-plated brass, and support rod is constructed of stainless steel. Chain is 21” long and can be adjusted…

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

This Lattice Lab System features an assortment of aluminum rods frup to 72" long.  Assembly is easy and requres only a screwdriver.  Support rods are made of hard aluminum and foot plates and hook connectors are made of cast alloy.  Please note: must be shipped by motor…

Screw Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.

Clamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.