Humboldt Lab Clamps, Stands & Supports
-
Burette Clamps
HumboldtTwo prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.
-
Center-flanged Pipe Stem Triangles protect glassware on hotplates and over burner flames.
-
Cast Iron Support Rings
HumboldtDistance from center of ring to center of clamp: 4-1/4" (108mm). Plated. Attaches to support rods up to 3/4" (19mm) in diameter.
-
Humboldt Clamp Holder
HumboldtThe Humboldt Mfg. Co clamp holder is a critical item to have in any chemical laboratories to enhance the performance of various experiments and analysis.
-
Rod "Muff" Clamps
HumboldtThese Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.
-
-
Wooden Test Tube Clamps
HumboldtThis clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Clamp and Support Rods
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).
-
14ga Square, Nickel-Chrome Wire Triangles protect glassware on hotplates and over burner flames.
-
Large Rod "Muff" Clamps
HumboldtThese Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.
-
Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.
-
Multi Clamp
HumboldtManufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2"(13mm) in diameter.
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Threaded Base Plates
HumboldtDesigned to attach to a tabletop or inverted into a recessed hole for flush mounting. Models are available with either a threaded hole completely through the center or with an unthreaded thru-hole. These die-cast units are supplied without rod. Other sizes are available on request with threaded or…
-
Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width
-
Clamp and Support Rod
HumboldtHighly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…
-
Dovetail Clamp
HumboldtThis clamp can be instantly detached from vertical surfaces such as heaters. It is constructed of aluminum and incorporates a 5/16"-18 by 1-1/4" steel thumbscrew. The clamp is 1-3/16" wide by 2-15/16" (30mm x 59mm) long and measures 1-3/8" (35mm) from muff center to the dovetail.
-
-
Funnel Support
HumboldtThe Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.
-
Smooth Pipe Stem Triangles protect glassware on hotplates and over burner flames
-
Thermometer Clamps
HumboldtSimilar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The…
-
Swivel Clamp Holder
HumboldtFor attaching extension clamps to supports Aluminum construction Has swivel for rods up to 5/8” diameter
-
Lincoln Type, Double Burette Clamp
HumboldtFitting on 5/8" (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm)long by 3" (76mm) wide with a center distance 7-1/4" (184mm) between burettes. The unit is designed for use with burettes from 6mm to 16mm…
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Adjustable Band Clamps
HumboldtAdjustable Band Clamps provide a unique and efficient clamping mechanism for objects of any shape and size. The same clamp can be used to handle a gallon container or fit snugly to hold a small thermometer, reducing the need to stock numerous clamp sizes and reducing time spent looking for the…
-
Sturdy Tripods featuring adjustable openings through the use of detachable rings.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…