Humboldt, Clamps/Supports, Nucleic Acid
-
These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.
-
Humboldt S/J Joint Clamp
HumboldtThe Humboldt Mfg. Co S/J joint clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.
-
Threaded Base Plates
HumboldtDesigned to attach to a tabletop or inverted into a recessed hole for flush mounting. Models are available with either a threaded hole completely through the center or with an unthreaded thru-hole. These die-cast units are supplied without rod. Other sizes are available on request with threaded or…
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Gas Cylinder Clamp
HumboldtDesigned to safely and conveniently secure compressed gas cylinders in an upright position. Accommodates cylinders 4-1/2" to 11" (114mm to 279mm) in diameter. The heavy-duty clamp with adjustable thumbscrews fits conveniently on any bench up to 2" (51mm) thick without marring the surface.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Rod "Muff" Clamps
HumboldtThese Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.
-
Thermometer Clamps
HumboldtSimilar to the H-8950, this clamp has a phosphor-bronze spring clip attached to an aluminum rod-holding block for thermometers and 2 "v" notches designed to hold the H-1602 ring and stem assembly in an ASTM Softening Point Apparatus, but can be used to suspend other items, such as pitch cubes. The…
-
Swivel Clamp Holder
HumboldtFor attaching extension clamps to supports Aluminum construction Has swivel for rods up to 5/8” diameter
-
Electrolytic Support
HumboldtThe "Hoffman Type" Electrolytic Support is used with associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base (H-21225) with insulated binding posts, support rod (H-21360), one burette clamp (H-8022),…
-
Funnel Support
HumboldtThe Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.
-
Adjustable Band Clamps
HumboldtAdjustable Band Clamps provide a unique and efficient clamping mechanism for objects of any shape and size. The same clamp can be used to handle a gallon container or fit snugly to hold a small thermometer, reducing the need to stock numerous clamp sizes and reducing time spent looking for the…
-
Hook Collars
HumboldtHook Collars are used for attaching pulleys, balances, cords, trusses, pendulums, and other apparatus to support rods. The collars are plated for corrosion resistance and are supplied complete with thumbscrew and hook.
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…
-
Universal Plasticol coated jaws Swivel jaws of stamped steel; forged steel shank Recommended for condensers and irregular shapes
-
Large Rod "Muff" Clamps
HumboldtThese Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.
-
Burette Clamps
HumboldtTwo prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.
-
Sturdy Tripods featuring adjustable openings through the use of detachable rings.
-
Multi Clamp
HumboldtManufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2"(13mm) in diameter.
-
Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width
-
Clamp and Support Rods
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).
-
Humboldt Test Tube Clamp
HumboldtThe Humboldt Mfg. Co test tube clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.
-
Clamp and Support Rod
HumboldtHighly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…
-
14ga Round, Nickel-Chrome Wire Triangles protect glassware on hotplates and over burner flames.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Center-flanged Pipe Stem Triangles protect glassware on hotplates and over burner flames.
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.
-
Humboldt Clamp Holder
HumboldtThe Humboldt Mfg. Co clamp holder is a critical item to have in any chemical laboratories to enhance the performance of various experiments and analysis.
-
Humboldt Clamp & Support Rod
HumboldtDesigned to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish.
-
Wooden Test Tube Clamps
HumboldtThis clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).
-
Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.