Ace Glass Lab Glassware
-
Distilling Receiver
Ace GlassFor operation other than at atmospheric pressure. Vacuum is applied to the side arm with the T-bore stopcock. The secondary receiver is vented by means of the lower stopcock. The capacity from the bottom of the drip to the stopcock is 2.5mL.
-
Dilatometer, Volumetric
Ace GlassFor use in any reaction where there is a change in volume. Described in Experiments in Physical Chemistry, Shoemaker & Garland, 1962, by McGraw-Hill Book Company, Inc. Experiment 27. Capacity of bath is 75mL, bulb 50mL, with capillary tube graduated from 0.0cm at bottom to 15.0cm at top. I.D.…
-
Adapter, Adjustable Electrode
Ace GlassThreaded adapter for use with platinum or other electrodes that normally would be step sealed to glass. With threaded bushing and silicone rubber septum for sealing, the electrode may be adjusted for depth or removed if desired. Diameter of electrode i
-
Glass standard taper and spherical joint adapters featuring right angle tee ground glass sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Adapters, Standard Taper Joints
Ace GlassA general line of adapters supplied with inner joints to be used in assemblies for distillation, extraction or your own requirements. On codes -14 and -22, please specify capacity and catalog number of item into which the adapter is to be placed. When
-
Borosilicate glass transition adapter to convert beaded pipe 2 to standard taper joint.
-
Dilatometer, A.O.C.S.
Ace GlassFor determination of fat and oil constants. Described in A.O.C.S., Method Cd 10-57. Total volume of precision bore capillary is 1.400 mL plus or minus 0.015mL. The smallest graduation is 0.005mL. Complete with stopper and hooks. Both stopper and tube are numbered.
-
-
NO-AIR storage tube with a 0-4mm Hi-Vac valve top with a standard taper jointed sidearm. The valved top gives the researcher precise flow control and the standard taper, outer joint facilitates connections to Schlenk lines.
-
Sparger, Easy action stopcock
Ace GlassSparger tube with Ace fritted bottom available in various porosities. Top has either 0-3 or 0-5 Easy Action Stopcock. The 90 degree side arm is available with a glass hose connection or a #7 Ace-Thred which promotes the use of our 5853-06 Ace-Safe conn
-
Storage Tube, Schlenk
Ace GlassUsed for filtration of solvents and collection of precipitate. With two standard taper 14/20 or 24/25 outer joints and two standard taper 14/35 or 24/40 inner. With fritted disc.
-
Cylindrical vessels with #15 Ace-Thred at both ends, no side port. Use 5838-91 PTFE Adapter with removable filter disc and 5839-04 PTFE Valve with luer extension at either end, see 6404 for listings.
-
Flask Head, PTFE-Clad Bottom Joint
Ace GlassInterchangeable Mini-Lab head with 45/50 bottom joint, PTFE-Clad. No grease needed, will not freeze. Top 19/38 center joint, and are 14/20 side necks are ground. See 9443-20 for head with PTFE-Clad bottom joint and polished top joints. Side arms are placed at proper angles so that the thermometer…
-
Distilling Receiver
Ace GlassCalibrated to contain. Supplied in 10mL capacity with 0.2mL subdivisions.
-
Jacketed glass immersion well for use with our 7825 series lamps within our 6962,7863,7864,7865 & 7891 series reactors. Codes -30 & -40 feature a small diameter glass inner feed tube to ensure the flow of coolant from the bottom of the well up to the outlet. Codes -35 & -45 feature a PTFE inner…
-
Adapter, Vacuum Jacketed
Ace GlassUsed as distilling head for connecting top of column with condenser. Top 10/30 standard taper joint for 76mm immersion thermometer.
-
Adapter, Offset, Ace-Thred
Ace GlassThermometer adapter with inner joint at bottom and top threaded piece offset and angled approximately 10 degree for use in multiple neck flasks. Threaded Nylon bushing tightens into glass piece to form an O-Ring compression seal with thermometers, blee
-
Sublimation Apparatus, Vacuum, Improved
Ace GlassTwo sizes, both featuring an O-Ring sealed, greaseless flange with 6517 Quick Release Clamp. Top flange is ground flat, bottom mating flange has an O-Ring groove for a CAPFE O-Ring (PTFE encapsulated silicone), held tightly together via a quick release clamp. Size 60 is 200mm high x 60mm I.D.; uses…
-
Photochem Reactor, Ace-Thred, Plain
Ace GlassGlass, unjacketed reaction vessel design for use with our 7874 quartz and 7875 glass immersion wells. Instead of a standard taper joint, this reactor utilizes a height-adjustable, non-freezing #50 Ace-Thred. Also featured, a 14/20 angled joint for a sparger tube, a 24/40 vertical joint for a…
-
Tube, Drying
Ace GlassMicroscale Drying Tube used to protect moisture sensitive reaction components from atmo- spheric water vapor while allowing a reaction system to be kept unsealed. With inner joint, bent 90 degree to main chamber.
-
Adapter, Bushing
Ace GlassBushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.
-
Firestone splash guard adapter with medium length joints that will accept full length joints. Internal porosity A (147-174 micron) fritted disc that assures no carry-over in the event of pot splash-up. Overall length is kept to a minimum to positively
-
Joints, Extended Drip Tip
Ace GlassStandard taper ioint with lower tube reduced in diameter to size listed. Length of extended tube 101mm.
-
Clamps, Spherical joint, Union type
Ace GlassU.S. patent #2,388,633 fabricated from aluminum. This type clamp affords a positive, uniform clamping pressure.
-
Distilling Receiver, Graduated
Ace GlassAll-purpose receiver for general distillation work. With graduated body. Stopcocks are 4mm bore. Tubing connections are 10mm O.D. olive type.
-
Standard taper, outer member, medium length, straight-sided joint.
-
Adapter, Offset
Ace GlassOffset adapter with outer joint top, inner joint bottom. Some include drip tip.
-
Tube, Craig Recrystallization
Ace GlassMicroscale Craig tube for recrystallizing small quantities of reaction product. Craig tube recrystallization consists of a glass outer tube with non-uniform grind to purposely allow leakage, and a PTFE inner plug*. This plug eliminates breakage normally experienced with glass plugs. Volume stated…
-
Complete reaction assembly utilizing an Ace-Thred instead of a ground joint for improved immersion well / cooling tube seal. Features a 14/20 angled joint for sparger tube, 24/40 vertical joint for a condenser and a #7 Ace-Thred thermometer joint. Actual working volumes are 40 to 50% of stated…
-
Reaction Flask Head
Ace GlassConical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.
-
Adapter, Bushing
Ace GlassBushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.
-
Distilling Receiver, Vacuum Type
Ace GlassWith standard taper inner joint at bottom and outer joint at top. Graduated to 125mL in 1mL subdivisions.