SP Bel-Art, Bottles, Racks
-
Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can…
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
Adjustable Microplate Tilting Stand
SP Bel-ArtMinimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…
-
Poxygrid® "Half-Size" Test Tube Racks
SP Bel-ArtExcellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …
-
Scienceware® Standards Bottle Rack
SP Bel-ArtArranges valuable USP™ reference standards Rack fits into Secador® Desiccator for low humidity storage Clear acrylic construction for easy viewing of labels Wipes clean Stores thirty 23mm standards bottles in a compact footprint, 33 x 11 x 2.2 cm high.
-
Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…
-
Scienceware® Separatory Funnel Rack
SP Bel-ArtThe Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
Scienceware® Vacu-Rack
SP Bel-ArtThis polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7mm (1/2") O.D. and 63 tubes 16mm (5/8") O.D. up to 102mm (4") long. Tubes are suspended in channels by colored stoppers providing instant visual identification One or two channels may be left open…
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Scienceware® Microcentrifuge Tube Ice Racks
SP Bel-ArtLower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…
-
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…
-
Save Time and Money. No More Searching, Fumbling or Breakage. Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work. Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®,…
-
Rotary Separatory Funnel Rack
SP Bel-ArtThis rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels …
-
Spectro Cell Rack
SP Bel-ArtWells hold standard cells with a 12.5mm cross-section; however, some plastic cells may not fit. Steam autoclavable at 121º C (250º F). Overall dimensions 209 x 70 x 35mm (8 1/4" x 2 3/4" x 1 3/8 "). Polypropylene rack holds twenty 10mm lightpath Spectrophotometer cells in numbered wells The…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
100mm Petri Dish Rack - Clear TPX Body
SP Bel-ArtClear, TPX® rack with polypropylene posts securely holds up to fifty-four 100mm Petri dishes. Shipped flat, they can be assembled in minutes. Easily viewed through the clear base and divider Dishes can be removed with one hand Built-in handle provides easy transport Rubber feet…
-
Rotary Pipette Stand
SP Bel-ArtTurn to the Pipette You Want This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7-1/8") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
Scienceware® Stack Rack® Test Tube Racks
SP Bel-ArtMatch Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Scienceware® Rack Slanter
SP Bel-ArtTilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Lab-Aire® II Glove Holder
SP Bel-ArtRealize faster drying time by placing wet laboratory gloves on the convenient Lab-Aire® II Glove Holder. Keeps gloves open for external as well as internal drying Helps to extend glove life by maintaining their shape, preventing bending, cracking and moisture buildup Significantly…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
Scienceware® Round Bottom Flask Support
SP Bel-ArtRound-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…
-
Poxygrid® Labware Drain Stand
SP Bel-ArtDry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all)…
-
Poxygrid® 500mL Centrifuge Tube Racks
SP Bel-ArtKeeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…