SP Bel-Art, Bottles
-
Wide Mouth Wash Bottles
SP Bel-ArtLow-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Scienceware® Pipet Support Rack
SP Bel-ArtHolds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips. Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…
-
Plain Spinbar Magnetic Stirring Bars
SP Bel-ArtSmooth surface stirbars have no sharp or flat edges which maximizes contact with the stirring vessel. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008, as verified by SGS…
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
Spinstar® Magnetic Stirring Bars
SP Bel-ArtSpinstar® magnetic stirring bars create a deep mixing vortex at relatively slow speeds. Star shape is designed to fit the inside diameter of most commonly-used beakers Perfect for applications requiring slow, thorough mixing Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
Reduce frequency of spinout in viscous solutions or when stirring at high speeds. The high magnetic field strength of Samarium Cobalt (Rare Earth) magnets can provide up to three times stronger coupling vs. Alnico magnetic stirring bars. Stronger coupling with the drive magnet keeps…
-
Adjustable Handle Water Sample Dipper
SP Bel-ArtFor taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…
-
Spinbox™ Magnetic Stirring Bar Assortments
SP Bel-ArtThese stirbar assortments come in a convenient storage box and provide instant availability of these highly popular Teflon® PTFE encapsulated Alnico magnets. Choose from Octagon, Cylindrical, Polygon, Micro, Egg-Shaped or Spinplus® shaped assortments FDA Grade, USP Class VI…
-
Scienceware® Protective Labeling System
SP Bel-ArtThis unique system utilizes a tape dispenser, labels and clear plastic tape to fully cover and protect your labels Protective Labeling System provides labels that stand up to harsh laboratory conditions. The clear tape protects labels from the freezer, autoclave, acids, alkalis and organic…
-
Scienceware® Flowmi™ Cell Strainers
SP Bel-ArtScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions…
-
Scienceware® Churn Sample Splitters
SP Bel-ArtMix and Divide a Water Sample into Subsamples for Testing Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one…
-
The multifaceted magnetic stirring bar surface adds turbulence relative to similar size smooth cylindrical stirring bars. Ideal for single use applications mixing radioactive reagents or when cross contamination might be a concern Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
Lightweight and sufficiently transparent for observation of contents Screw cap, low stable form Able to attach identification tags or secure cap to bottle to avoid mismatching Plug molded to cap underside sets firmly in bottle mouth, providing excellent seal that does not freeze or…
-
Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …
-
Switch-Grid™ Test Tube Racks
SP Bel-ArtThis innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…
-
Scienceware® Economy Dippers
SP Bel-ArtFor convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …
-
Scienceware® No-Wire™ Cuvette Rack
SP Bel-ArtAll-polypropylene rack provides gentle no-scratch support for fragile and expensive spectrophotometer cuvettes. Holds forty-two 10mm light path cuvettes 6 x 7 row layout Steam autoclavable at 121°C (250°F)
-
Sterileware Powder Thief
SP Bel-ArtAvailable in two lengths each with four tip volumes, these sterile powder thieves easily sample from targeted locations within bulk powders. Used by pharmaceutical, food, cosmetic and chemical companies. Made from FDA and EU conforming materials; safe for food, drug and cosmetic use High…
-
Save Time and Money. No More Searching, Fumbling or Breakage. Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work. Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®,…
-
Scienceware® Long Handle Sampling Spoons
SP Bel-ArtDesigned to gather small amounts of sample material, especially in hard to reach containers. Long handle reaches into jars, bottles and other confined areas Minimizes the potential of personal contact with sampled material FDA grade polypropylene plastic, safe for food, drug and…
-
Designed for stirring large volumes in vessels such as drums and tanks. A molded pivot ring minimizes the contact area between the bar and the vessel, thus reducing friction and chattering. Marring of plastic containers is diminished Multifaceted surface adds turbulence relative to…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
This magnetic stirring bar fits into the standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine. Centrifugal pumping action, generated by the cross channels in the upper face, mixes without…
-
Wide Mouth Bottles
SP Bel-ArtHigh-density polyethylene bottle with foam lined, white polypropylene cap. Offers excellent chemical and impact resistance Capacity: 4000ml (1 gallon) Closure: 110mm
-
Serum Vial Racks
SP Bel-ArtTop shelf height is 41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates…
-
Long Handled Scrapers
SP Bel-ArtSemi-Flexible nylon scraper attached to a rigid fiberglass handle provides a secure grip when reaching into deep vessels. Nylon scraper will not scratch glass Scraper, when removed from handle, can be sterilized at 100°C Scraper is 11.4 x 17.8cm L (4-1/2 x 7") with one…
-
Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps. Flexible white rod is 33cm (13") long Autoclavable
-
100mm Petri Dish Rack - Clear TPX Body
SP Bel-ArtClear, TPX® rack with polypropylene posts securely holds up to fifty-four 100mm Petri dishes. Shipped flat, they can be assembled in minutes. Easily viewed through the clear base and divider Dishes can be removed with one hand Built-in handle provides easy transport Rubber feet…
-
Six different, small size, double-ended tools (150mm long) and a pair of tweezers (145mm long) suit small sample handling needs. Each double-ended tool has two different end shapes providing 12 implements to better match user needs. Two small spoons ends for transferring and collecting both…