SP Bel-Art, Ready to Ship, Bottles
-
Poxygrid® "Half-Size" Test Tube Racks
SP Bel-ArtExcellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …
-
Unique immobilizing tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy…
-
Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…
-
Poly-Cone Universal Joint Adapter
SP Bel-ArtThis precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…
-
Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
-
Scienceware® Slide Mailer
SP Bel-ArtChemically inert, polyethylene container has a deep screw cap to provide maximum protection against breakage. Once cap is removed slides project 12.7mm (½") out of the jar for easy grip and clean handling. Internal grooves accept 5 to 10 microscope slides 25 x 75mm (1 x…
-
Scienceware® Economy Dippers
SP Bel-ArtFor convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …
-
This magnetic stirring bar fits into the standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine. Centrifugal pumping action, generated by the cross channels in the upper face, mixes without…
-
Micro (Flea) Spinbar® Magnetic Stirring Bars
SP Bel-ArtMicro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers. Particularly useful for environmental testing and life science applications in which small sample volumes need to be prepared and evaluated Alnico magnet…
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
These egg-shaped stirring bars are designed especially for use in round-bottom vessels as they spin unrestricted by the vessel contour. Particularly well suited for round bottom flasks; shape ensures complete mixing Offers minimal contact when used in plastic containers Egg shape…
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Wide Mouth Wash Bottles
SP Bel-ArtLow-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL
-
These stir bars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008 facility, as…
-
Spinvane® Magnetic Stirring Bars half-round tapered shape is designed for conical bottom centrifuge tubes. Half-round shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Manufactured to fit 9.7/6.1 x 23.0 x 9.9mm tubes;…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Convenient assortment packs suit a variety of needs. Choose from octagonal, round, micro or color-coded bars to best suit your needs Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO…
-
Color Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Choose from red, yellow or blue. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and…
-
Make accurate additions of precious materials as needed. Rotating the toothed thumb wheel vibrates the curved tip spatula, giving you control over transfer from spatula to weighing dish. Narrow V-shaped blade and 21cm (8-1/4”) length maneuvers easily into small mouth containers and…
-
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…
-
Scienceware® Bottle Carrier
SP Bel-ArtThis bottle carrier is made of 1/4" thick high-density polyethylene. Measures 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately Each compartment measures 8.5 x 8.5cm (3-3/8/8 x 3-3/8")
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Sterileware Jumbo Sampling Pipettes
SP Bel-ArtThese sterile Jumbo Pipettes are ideal for sampling from narrow- or wide-mouth containers up to 208-liter (55 Gallon) drums. Reaches into container while keeping hand clear of contents Diameter allows for use through drum bunghole or other small openings Color-coded end helps prevent…
-
Scienceware® Pipette Pump III
SP Bel-ArtSuperior design for better pipette visibility and more precise dispensing User-friendly shape for maximum comfort Lightweight for easy, one-handed use Compact design is ideal for working in hoods or glove boxes Ergonomically designed for comfort and simplicity, the Pipette Pump III has a…
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
In-Line Test Tube Rack
SP Bel-ArtFor high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly
-
Scienceware® Protective Labeling System
SP Bel-ArtThis unique system utilizes a tape dispenser, labels and clear plastic tape to fully cover and protect your labels Protective Labeling System provides labels that stand up to harsh laboratory conditions. The clear tape protects labels from the freezer, autoclave, acids, alkalis and organic…
-
Scienceware® Dispensing/Drop Bottles
SP Bel-ArtLow-density polyethylene Cap snaps on easily and continues to hold a tight seal even after repeated use Tip opening is 0.76mm (0.030")
-
Scienceware® Positioner-Retriever, PE
SP Bel-ArtSet the Spinbar® Magnetic Stirring Bar precisely where it is wanted with no splash using the Spinbar® Positioner/Retriever. Just as easily, retrieve stirbars without coming into contact with the liquid in the container. For recovering a Spinbar® Magnetic Stirring Bar, keep the…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)