The Slide Drying Bench aids in the preparation of microscope slides at the specimen mounting stage. It complements both the Paraffin Wax Dispenser and the Paraffin Wax Mounting Bath to provide a complete set of paraffin wax sampling equipment for the modern laboratory. Accepting up to 50…

The Multi (Extraction) Mantle with six recesses has a built-in electronic controller and offers a choice of heater only (EME6) or heater/stirrer (EMEA6) combination models. They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains…

Our OS6000 series STEM Omni Reaction Stations enable you to run up to 6 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS6000 series Omni Reaction Stations means that the same base unit (OSCA) can accommodate a variety of cartridges and…

The EMA Electromantle shares all the features of the standard EM Electromantle, but has the added functionality of magnetic stirring. The solid state stirring circuitry is built into the base of the main housing and provides powerful stirring over a range of capacities and viscosities. The stir bar…

The CMUV Electromantles deliver the benefits of the CMU Electromantle, but do so for very large 60° funnels, as well as pear-shaped and round bottom flasks. This is achieved through a "V-shaped" design for the heating mantle, with funnels being accommodated through a bottom opening in the…

CMU Uncontrolled Electromantles CMU heating mantles are used in wet chemistry to heat liquids in round bottom flasks. The metal case is designed to remain "cool-to-the-touch" when in operation. Electrothermal heating mantles have a grounded stainless steel earth screen covering the…

The RS 9000 Heater/Shaker Reaction Station can be used within a robotic workstation or as a stand-alone apparatus within the lab. On a robotic platform, heating and shaking cycles can be controlled by external software or as part of a fully automated system, through the RS232/ RS485/ GSIOC ports;…

The updated and improved IA9000 series Digital Melting Point Apparatus offers an easy way to measure the melting points of samples without sacrificing accuracy; the temperature resolution is within 0.1°C. It is ideal for multiple users, being ergonomically designed to ensure comfortable viewing…

The CMUT Electromantle is a multiple volume CMU Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Controlled Electromantles. The CMUT Electromantle is used in wet chemistry to heat liquids in round…

The Mel-Temp® Digital Melting Point Apparatus offers a quick and easy way to measure the melting points of samples at a budget price with a temperature resolution of ±1°C. It is ideal for multiple users, being ergonomically designed to ensure comfortable viewing for everyone, with a…

Electrothermal offers 3 different models of 1-Way Heating Controllers which operate up to 800W (MC5), 1800W (MC242) or 2300W (MC227); MC228X1 is the 115V version of MC227 and operates up to a maximum of 1100W. These heating controllers can control one piece of laboratory equipment at a time, or an…

The Micro- and Macro-Kjeldahl Extraction equipment has been designed for Kjeldahl extraction on a micro/macro scale to determine the protein content of food. These multibank units have 2 or 6 recesses in a stainless steel outer casing with back-mounted brackets (supplied with each unit), which…

The NEW Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides. The…

The Multi (Extraction) Mantle with three recesses has a built-in electronic controller and offers a choice of heater only (EME3). They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains "cool-to-the-touch". For Heater…

CMUA Electromantles share all the excellent features of the CMU Electromantle, but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution…

Digi-Mantles enable a round bottom flask of 250ml, 500ml or 1000ml capacity to be stirred and heated up to an element temperature of 450°C through precise electronic control, giving an accurate measure of temperature and stirring. The modular design allows heating cartridges of different sizes to…

Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers.…

HT9 Glass Fibre Tapes are flexible heaters that are ideal for heating columns, pipes, valves and transfer lines, especially when these applications need to be observed. They can be applied to metal pipes as well as glassware. The HT9 Series Glass Fibre Tapes have an element wound on a glass…

Ensures accurate temperature control 3-digit LED 1°C resolution Temperature range: -10 to 800°C Resistance thermometer probe senses the temperature of a medium that is being heated. Required temperatures are programmed into the unit using the directional…

EMX Spill-proof Electromantles and EMV V-shaped Electromantles may accommodate 60° funnels, pear-shaped or round botom flasks. They have been designed to accept a large range of flasks and funnel sizes for added flexibility. The stainless steel screen on all EMV models covers the heater…

Our OS1025 STEM Omni Reaction Station enables you to run up to 10 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS1025 Omni Reaction Station means that the same base unit (OSCA) can accommodate a variety of cartridges and sample volumes…

Incorporates a stirring module that allows the solution to be stirred and heated at the same time Three positions for 100, 250, 500 or 1,000 mL flasks Designed to maximize safety Separate heating controls for each position Temperature range to 450°C Stirring speed: 50 to…

CMU Controlled Electromantles CMU metal-cased Electromantles are used in chemistry to heat liquids in round bottom flasks. They are ideal for busy laboratories with multiple users as they are very safe to use, the metal case being designed to remain "cool-to-the-touch" when in…

The STEM Integrity 10 Reaction Station enables you to conduct 10 different reactions simultaneously within the same reaction unit, each reaction being conducted within its own cell, at its own individual temperature and stir rate. Save up to 90% equipment running costs using Integrity Reaction…

Unique Electrothermal replaceable heating element/cartridge Heating mantle and controller in one unit Polypropylene housing The EM Series Electromantle incorporates the proven electrothermal coiled, flexible heating element in special insulation and features a “power…

The STEM RS1000 Reaction Station has 10 positions that can be programmed to run at the same temperature and stirring rate simultaneously. It can be used for a wide range of applications from simple synthesis in the laboratory to process optimisation in industry. Key Features 10 position…