Heating Mantle Controller

Compare Tool

Select up to 3 products

Heating Mantle Controller
1 - 32 of 66
Sort
View
Show
  • Manually adjustable; has a percentage-timer design and no sensing element Regulates mantles, tapes and cords, as well as small furnaces, ovens, hot plates, dies and other applications requiring stepless control Can be used on any non-inductive loads to its rated capacity of 1,440 watts …

  • Heating Mantles

    Glas-Col

    …order. In self-standing metal case, Model TM (5910C10 to C45) Glass cloth mantle, which is suspended in cylindrical aluminum housing; heavily insulated against heat loss Heating element is distributed over bottom and sides. Housing is grounded to third wire of line cord,…

  • Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Mount on lattice work or bench top Model 5915A01 will accommodate non-conductive loads to 1200 watts; model 5915A05 to 2400 watts. Electrical…

  • 1-Way Heating Controllers

    Electrothermal (Cole-Parmer)

    …They all have a regulator control knob which can be turned clockwise to increase power. As the knob is turned, the heating controller's amber neon light will pulsate to show that power is being supplied to the equipment being controlled, e.g. mantles, heating tape or cord. The pulse frequency…

  • …microprocessor-based ramping control Microprocessor based PID control Ramp-rate or time-based programming profiles 24 Step program capability Program looping Guaranteed soak (dwell) deviation Auto tuning function allows automatic setting of control parameters with a…

  • Provides automatic, time-proportioning control of temperature for loads of up to 1,200 watts Temperature range 0-500°C (0-1,000°F) Used with heating mantles, tapes, cords, small ovens and other resistive heating loads Controller has a calibrated set-point dial in °C and…

  • …tubing with screw connectors. The heating mantle with stirrer features a polyurethane coated aluminum exterior and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat. Maximum operating temperature is 400°C. Mantle can be used in a wide range of ambient…

  • Micro- and Macro-Kjeldahl Extraction Heaters

    Electrothermal (Cole-Parmer)

    … Each heating mantle has it own energy regulator incorporating an On/Off switch and a "Mains to Heater" amber neon indicator. There is also a "Mains On" clear neon indicator on the front panel. The lower part of the unit houses dedicated controllers for each recess.…

  • Heating Mantles

    Across International

    Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds. The DigiM mantle is equipped with two sets of thermocouples for proper…

  • …3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug. Used to control THERMOWELL heating mantles or other resistive heating circuits (hot plates, heat tapes, water baths, etc.). Available in solid-state or proportional on/off models. All models are fused…

  • …found on other heating mantles Chemical-resistant cabinet Housing remains cool to the touch during operation UL fire-rated plastic enclosure Spills are channeled away from heating element Built-in proportional power controller maintains precise temperature control. Heating element is easily…

  • …of heating mantle controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. Controller is…

  • Liner Solvent Recovery System

    DWK Life Sciences (Kimble)

    For gravimetric oil and grease Three position linear system Heating mantle, controller and splash guard are required for complete system (clamps and support included): power 15 amps - 115 volts. Refrigerating circulator recommended for system water coolant: -4°C. Proper ventilation…

  • Unique Electrothermal replaceable heating element/cartridge Heating mantle and controller in one unit Polypropylene housing The EM Series Electromantle incorporates the proven electrothermal coiled, flexible heating element in special insulation and features a “power…

  • CMU Controlled Electromantles™

    Electrothermal (Cole-Parmer)

    CMU Controlled Electromantles CMU metal-cased Electromantles are used in chemistry to heat liquids in round bottom flasks. They are ideal for busy laboratories with multiple users as they are very safe to use, the metal case being designed to remain "cool-to-the-touch" when in…

  • Our controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. All units are supplied with a…

  • Provides a safety backup for lab heating processes Compact, 1/16 DIN unit Allows for over-temperature limiting Terminates primary control when temperature exceeds set limit Model 5916A30 will accommodate a non-conductive load to 1200 watts; Model 5916A35 to 2400 watts.…

  • Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

  • …uniform heat to round-bottom flasks Excellent alternative to other heating methods like a bunsen burner Ideal for use with a basket ring stand Low Watt Density Specifications Fiberglass cloth outer shell Uniform, low-watt density knitted and braided heating element.…

  • Combination Heating Mantles

    United Scientific Supplies

    …distribution of heat. Maximum operating temperature is 400°C. Mantles can be used in a wide range of ambient temperatures, from about 45°F to 100°F, and relative humidity up to 80%. The units are not waterproof, and are rated as IP code 10 equipment. Power is controlled (from 0…

  • Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

  • …be adjusted between 30 and 60V. Controller is 4"; W x 5"; D x 3.7 "; H. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptcle and lighted power switch. Controller for use with CG-14000 and CG-14002 Heating Mantles rated at 30 or 60 Volts. 3-Year…

  • Heating Mantles

    United Scientific Supplies

    These heating mantles are designed for use with round bottom flasks. Features include polyurethane coated aluminum exteriors and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat. Maximum operating temperature is 400°C. Mantles can be used in a wide range…

  • Mantle Accessory

    Glas-Col

    … All 115 volt units are CSA certified Electrical: 4 foot separable 3 wire cord and locking connector Equipped with compact power controls that have solid state circuitry. Positive off switches and pilot lights. *ATF Standard Methods for Detection of Petroleum Based Accelerants…

  • …adjusted between 30 and 60V. Controller is 8"; W x 6"; D x 3.7"; High. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptacle and lighted power switch. Controller for use with CG-14000 and CG-14002 Heating Mantles rated at 30 or 60 Volts. …

  • Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full contents.…

  • Heating Mantles with Stirrer

    United Scientific Supplies

    Heating and stirring functions are independently controlled by 2 separate knobs. Each unit is supplied with a magnetic stir bar. Mantles with stirrer feature polyurethane coated aluminum exteriors and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.