Corning, Tubes
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
PYREX® Test Tubes
CorningWith lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…
-
Axygen Brand 50mL Screw Cap Centrifuge Tubes are designed to meet the needs of your laboratory. Made of durable polypropylene homopolymer, these tubes can withstand forces up to 12,000 RCF. Printed in two colors with a large writing surface. Centrifuge Rated to 12,000 x G Easy one hand…
-
Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…
-
PYREX® VISTA Test Tubes
CorningBeaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and…
-
PYREX® Oil Centrifuge Tubes
CorningPear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations: from 0 to 1/2 in 0.05 from 1/2 to 2 in 1/10 from 2 to 3 in 1/5 from 3 to 5 in 1/2 from 5 to 10 in 1 from 10 to…
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…
-
Widely used and referenced in laboratory protocols Dual position snap-cap prevents sample loss with ease of handling Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile) The foundation for consistent research…
-
These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C. Caps are provided with a white rubber liner.
-
Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…
-
Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
PYREX® Replacement Inlet Tube
CorningThis specially designed PYREX® inlet tube is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C) Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation…
-
Axygen® 0.65mL and 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Features Available in 0.65mL single MiniTube or 1.1mL single MiniTube and…
-
These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.
-
2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
1.1ml Polypropylene Mini Tubes
CorningAxygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
0.2mL PCR tubes (assorted colors) are made of thin wall polypropylene and designed for precise fit in heat blocks to optimize heat transfer With domed cap for efficient heat transfer Nonsterile and certified DNase- and RNase-free Autoclavable at 121°C and will withstand…
-
Centrifuge Tube 12 ml
CorningThese 12mL heavy-duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…
-
These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to 600°C.
-
Plastic Caps With Teflon Liners
CorningAs supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish
-
Centrifuge Tube 15 ml
CorningUniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.
-
Cluster tubes are composed of 1.2mL 96 individual polypropylene tubes in a 96 well microplate rack with lidPolyethylene tube caps are available in 8-cap strips (Corning No. 4418)
-
These 50mL PYREX® round bottom, nongraduated centrifuge tubes have a No. 13 Standard Taper solid glass pennyhead stopper. Rockefeller Institute of Medical Research type.
-
-
These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…
-
PYREX® Conical Centrifuge Tubes
CorningGraduated Capacity 50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length…