Polystyrene Tubes

…consistent research results        Provide reliable containment of laboratory fluid samples      Polystyrene tubes are best suited for procedures requiring high optical clarity    Dual-position snap caps, heavier gauge walls, and unique…

Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polystyrene tubes provide clarity and are appropriate for use with mild acidic (except oxidizing acids) or alkali solutions, alcohols (except higher alcohols) and salt.

With two-position vent stopper that fulfills two functions: When attached lightly, this enables a uniform ventilation of the tube contents When attached firmly, by pressing in the stopper further, an airtight closure of the tub

This 13 x 100mm polystyrene test tube has a capacity of 7ml. Tube features a round bottom and includes a hollow top plug cap made of polypropylene. Sold as a pack of 100 tubes.

Size 100 x 15 mm Of clear polystyrene Total volume 12 mL Working volume 10 mL Tube is radiation sterilized and includes plug-seal, polyethylene stopper; packaged in sleeves of 100, five sleeves to a case.

Size 75 x 12 mm Of clear polystyrene Total volume 5 mL Working volume 4.0 mL Tube is packaged under aseptic conditions in sleeves of 100, 30 sleeves to a case. Without stopper; see Thomas number 9219R30 for stopper.

…Centrifuge tubes are designed for your everyday centrifugation and storage needs. Made of clear polystyrene these tubes include molded in graduations. They are available with a flat cap. All sterile package versions are sterilized with a validated and approved ISO 11137 method. Racked tubes…

Sterilized polystyrene transport tubes are graduated from 1 to 8cc with graduation intervals of 1cc. Include raised graduations on the outer surface, a flat bottom for self-standing, and a leak-proof polyethylene screw cap. Dimensions: 20mm diameter x 112mm height with cap. Case/500

…for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic…

…molded, conical bottom test tubes for general purpose laboratory work Polystyrene tubes provide clarity and are appropriate for use with mild acidic (except oxidizing acids) or alkali solutions, alcohols (except higher alcohols) and salt. Polypropylene tubes are more chemically resistant…

These 8 mL polystyrene round bottom tubes have an outer diameter of 13 mm.

Made from optically clear polystyrene Sterilized to SAL 10 -6 Corning polystyrene Storage Bottles are now available as closed system solutions. They are sterile and arrive individually double-bagged and peassembled. The preassembled transfer caps have two ports. One port ends in a…

Falcon® polystyrene Plug Seal screw caps for 50mL centrifuge tubes are sterile. The caps are sold 50 per pack and 1,000 per case.

…tubes, 16,000g for 50mL conical bottom tubes, and 6,000g for self-standing tubes Polystyrene tubes Max Force (RCF) is 3,000g Temperature range of -80°C to 120°C 15 and 50mL clear tubes are available in recyclable racks or bulk packaged in zip-closure bags Clear centrifuge tubes…

Polypropylene tubes withstand up to 12,000 × g. Polyethylene tubes withstand force to 6,000 × g. Our polystyrene tubes withstand 3,000 × g and are useful in lipid fractionation.

Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polypropylene tubes are more chemically resistant than polystyrene and are appropriate for use with organic solvents and stronger acids (except oxidizing acids), alkalis, alcohols, chlorinated &…

Polypropylene or polystyrene Standard sizes Sterile or non-sterile Available with or without snap cap Thomas Culture Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked…

…culture tubes are precision molded from premium-grade, chemically inert plastic materials: polystyrene (PS) for clarity and polypropylene (PP) for toughness and chemical resistance. Polypropylene material is almost transparent and withstands centrifugation to 6000 x g. Polystyrene tubes may be…

Suitable for collection and transport of non-human bacteriological, serological and cytological samples Also useful for hygienic controls in food industry as well as in environmental field Swab tubes are made of polystyrene

14mL tubes feature molded graduations Polystyrene tubes are optically clear to visualize cultures Polypropylene tubes offer better chemical resistance

…These conical bottom tubes are chemically clean and metal free, ready to use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5, 1.0, 2.5, 5, 10, 12 and 15 ml. Polystyrene tubes resist a centrifuge speed of 1200g while polypropylene tubes resist speeds of up…

50mL centrifuge tube, polystyrene (PS) with red screwcap (HDPE) and printed graduations. Available in non-sterile and sterile packaging White graduation marks and writing area

…-90°C. Polystyrene tubes are not autoclavable but have a nominal temperature range between 90°C and -40°C. Polyethylene caps are not autoclavable, but are available sterile with many of the tube packages. Polypropylene tubes can be centrifuged to 3000 RCF and polystyrene tubes will…

…-90°C. Polystyrene tubes are not autoclavable but have a nominal temperature range between 90°C and -40°C. Polyethylene caps are not autoclavable, but are available sterile with many of the tube packages. Polypropylene tubes can be centrifuged to 3000 RCF and polystyrene tubes will…

…-90°C. Polystyrene tubes are not autoclavable but have a nominal temperature range between 90°C and -40°C. Polyethylene caps are not autoclavable, but are available sterile with many of the tube packages. Polypropylene tubes can be centrifuged to 3000 RCF and polystyrene tubes will…

Single Compartment Vacuum-formed of high impact, white polystyrene with turned rim and rounded corners. All are 430 mm long and 360 mm wide: fit into standard lab bench drawers. Single Compartment Open, flat single compartment tray Dimensions: 360 x 430 mm at top x 64 mm…

…consistent research results        Provide reliable containment of laboratory fluid samples      Polystyrene tubes are best suited for procedures requiring high optical clarity    Dual-position snap caps, heavier gauge walls, and unique…

…and printed graduation marks. Sterile tubes are RNase free, DNase free and Pyrogen free. Polystyrene (PS) Cap is made from High Density Polyethylene (HDPE) 15mL tube dimensions: 17 x 120mm 50mL tube dimensions: 29.5 x 114mm Sterile tubes are RNase/DNase and Pyrogen Free …

Holds conical bottom tubes Polystyrene foam racks are designed to hold 25 Corning 15 mL conical bottom plastic centrifuge tubes.

…either polystyrene or polypropylene, these tubes are ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. No mold release agents are used that could cause errors and interferences in RIA tests. Precision molded with virgin thermoplastics ensures that the tubes are…