Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…

Axygen® 1.5mL Self Standing, Screw Cap Tubes feature screw caps that provide a tight secure seal. Will withstand up to 20,000 RCF Screw cap contains O-rings to assure efficient sealing and avoid evaporation Certified RNase-/DNase-free Nonpyrogenic

Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

Marking tapes identify hazardous areas, marking walkways or in 5S/Lean initiatives. Mark specific areas and promote safety by identifying potential hazard areas with visible tapes. Adhere to floors, walls, piping, posts, beams, handrails, stairways, machinery and equipment. Tapes can be used for…

Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Unaffected by temperatures from -55° to +120°C …

Nev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…

SuperSpin™ tubes feature an extra-thick and durable wall that can withstand centrifugation to 40,000 x G. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces that make this tube easy to…

BioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…

Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded

Various sizes available Multiple color choices Ideal for color coding, versatile Shamrock Labeling Tape accepts handwritten notations or can be imprinted to your specifications. Tape sticks tightly, leaves no residue and can be transferred from surface to surface.

Calibrated "to deliver" at 20°C, these borosilicate glass pipettes have a permanently colored amber scale with the zero line at the top. The small amount remaining in the tip, after completion of free delivery, is blown out and added to the main delivery volume (ground band indicator…

These RFID enabled racks specific for Captrack™ come pre-assembled with a unique RFID disk. After processing your samples with CapTrack™ these racks will allow the user to easily track their specimens to the appropriate cold storage location for fast and easy recall. These fully…

2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…

This innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…

labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations.  Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.

For cleanroom hand tasks and protection from acids and caustics. These natural rubber latex gloves are powder-free and case-hardened with outstanding puncture and tear resistance. Reduced ionic and extractable contamination. Positive grip in wet/dry applications. Size embossed instead of…

Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Can withstand temperatures from -55° to 120°C …

High-quality and versatile general purpose color tape ideal for a wide range of applications. This self-adhesive impregnated paper tape is water proof, oil proof and acid resistant. It adheres to virtually any clean and dry surface and peels off easily, leaving no residue. It also accepts…

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

Screw-Cap Microcentrifuge Tubes The Screw-Cap tube is ideal for any sample-processing or storage application imaginable-and especially for working with valuable or hazardous cells and materials. The extraordinary strength, safety and reliability of the Screw-Cap tube lets you perform…

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport.  …

Measuring (Mohr Type) pipettes are manufactured from specially selected, heavy wall machine drawn borosilicate accurate bore glass tubing. They have precision fored jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain; both are resistant to…

Grip rack for up to 17mm tubes Specially designed test tube rack features rubber grips that hold test tubes in place when decanting liquid. For up to 17mm tubes, 50-place (5 x 10 configuration), blue, Autoclavable. Dimensions: 254 x 140 x 51mm Grip rack w/ tube ejector …

CTI's NPXO series Nitrile Exam Gloves are manufactured for outstanding strength, stretch and fit. They are 100% nitrile offer textured finger tips, have a super soft feel and come in orange color. Our orange nitrile gloves are 10 in long, ambidextrous, and have been tested to meet and/or exceed all…

Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.

No special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…

2.0mL Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL…

MTC Bio’s SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample…

Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

For 15- and 50mL tubes Easy-to-assemble polypropylene racks snap together securely. Designed for stable use in water baths. Features alphanumeric grid reference aids for tube identification. Shipped flat. Wells for 15 mL tubes measure 17 mm dia; wells for 50 mL tubes measure 28 mm dia.

Nev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…

Heavy-duty chemical protection for the toughest applications 29 mil palm is 50% thicker than most standard flock-lined gloves Increased tensile strength and puncture/cut protection against chemical and physical hazards 100% cotton flock lining increases user comfort Recessed…