Minisart NY25 Plus: Rapid small volume filtration and sterilization of solvent-based samples and difficult to filter aqueous solutions. NY25 X Plus includes a ployamide (Nylon) memrane with a binder- free glass fiber depth pre-filter.

A 33 mm diameter sterile syringe filter with a 0.1 µm pore size hydrophilic PVDF membrane. Designed for sterilizing protein solutions, tissue culture media, buffers and additives Feature a Millipore Durapore® PVDF membrane and are the lowest protein-binding syringe filters…

Syringe filters for convenient filtration of small sample sizes through membranes. Nylon (Polyamide) membranes are hydrophilic and widely used in both aqueous and organic solvent filtration applications.They are best used in a pH range of 3-14 and at an operating temperature below 100 degrees Celsius.

EZFlow 13mm and 25mm Sample Prep Syringe Filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a…

•  3mm, 13mm, 25mm, 50mm •  0.10µm to 1.20µm •  Minimal sample hold-up •  High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters…

Increased throughput and speed of sample preparation Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Syringe filters for convenient filtration of small sample sizes through membranes. Polyether sulfone membranes are hydrophilic membranes that offer excellent flow rates with low protein adsorption. The membranes are chemically inert, can be used at a pH of 1 to 13 and operating temperatures below…

EZFlow 25mm High Particulate Syringe Filters are designed for high throughput filtration of viscous and particle-laden solutions. The syringe filter contains a filter membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Minisart Plus: Fast, sterile filtration of high particulate liquids. Surfactant-Free Cellulose Acetate membrane (SFCA) and binder-free glass fiber (GF) depth pre-filter.

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: PS…

Actiosart: Ultra-cleaning of gasses (e.g. to absorb unpleasant smells). MBS housing with high-adsorptive active carbon filling, and two PTFE membranes at 0.45 µm and 5 µm, respectively. Units have male luer slip outlets on both ends.

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than…

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables -…

Finneran 25mm Glass Fiber Automatic Filters are suitable for manual and automated filtrations. Ideal for sample volumes up to 10mL. Autoclavable.

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a…

National Scientific Target Syringe filters assure product performance and reproducibility through a vigorous quality testing program that challenges each type of filter to provide interference-free results. New sample distribution rings promote uniform application of the sample across the membrane…

This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents Non-sterile

Finneran 25mm Glass Fiber Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable.

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

Thermo Scientific™ Target2 GMF (Glass MicroFiber) Syringe Filters offer a larger porosity membrane; able to remove large particulates without clogging. Solvent-resistant Low-extractable polypropylene housing Syringe filters can be sterilized by autoclave at 125° for 15…

mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought. These filters are ethylene…

An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10…

mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

This 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.22 µm pore size used in Fine particle removal from aqueous solutions. Designed for fine particle removal from aqueous solutions Polyvinyl Chloride (PVC) housing Hydrophilic…