An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in…

mdi Hydrophilic Polypropylene membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: RC…

mdi Nylon-66 membrane Syringe filters type SYGN incorporate a Nylon-66 membrane with a binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

Well-suited for a variety of applications requiring maximum sample recovery Cellulose acetate filter Eliminates possibility of "popping" the filter Designed to sterilize and remove particulates from proteinaceous samples. Due to extremely low holdup volume and the negligible…

Increased throughput and speed of sample preparation Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are…

3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…

mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought. These filters are ethylene…

EZFlow 25mm High Particulate Syringe Filters are designed for high throughput filtration of viscous and particle-laden solutions. The syringe filter contains a filter membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in…

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Designed to filter viscous and organic solvent-based samples in a wide array of analytical and research applications Pure polyproylene housing Glass fiber prefilter Autoclavable Cameo GP filters feature a 1.0 micron borosilicate glass prefilter over a PolySep…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: …

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than…

A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophobic PVDF membrane. Super hydrophobic membrane for Transducer protection Clear PVC housing material Ethylene oxide sterilized Comes in a pack of 50

Finneran 25mm Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents Non-sterile

mdi microglassfiber syringe filters are specially designed for clarification of extremely viscous samples that may clog a membrane filter. These filters have microglassfiber media encased in a polypropylene housing. All mdi Syringe Filters are color coded for ease of identification and offer a…

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to…

Safe, convenient laboratory pipetting Pipets over 2,000 times without recharging Lightweight (<10 oz.), compact (<7 in.) and totally portable with power built into the handle Filtered, fail-safe nosepiece provides positive protection for electronic components and prevents…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

Finneran 25mm Glass Fiber Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a…

Thermo Scientific™ Target2 GMF (Glass MicroFiber) Syringe Filters offer a larger porosity membrane; able to remove large particulates without clogging. Solvent-resistant Low-extractable polypropylene housing Syringe filters can be sterilized by autoclave at 125° for 15…

33 mm Medical Millex Filter Units A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 μm from aqueous solutions. 33 mm…

mdi Hydrophilic Polypropylene membrane Syringe filters type SYGP incorporate a hydrophilic polypropylene membrane with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: …

Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable.

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis. Provide superb chemical resistant for solvents or for aggressive aqueous liquids.