Syringe Filter 0.2

Compare Tool

Select up to 3 products

Syringe Filter 0.2
1 - 32 of 58
Sort
View
Show
  • Sterile Syringe Filters

    Thermo Scientific Nalgene

    Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and…

  • Finneran 25mm Glass Fiber Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    …Disposable 25 mm filters for use with a syringe; utilizes a 0.2 mm cellulose acetate membrane filter with a built-in glass fiber prefilter Unitary construction provides leakproof seal, eliminates bypass and minimizes sample loss Can be used with standard and Luer-Lok syringes and hypodermic…

  • …membranes Pore sizes: 0.2 or 0.45 µm Puradisc syringe filters are designed for quick and efficient filtration of samples. Syringe filters are produced from pigment-free polypropylene and have standard inlet and outlet luer connections. Sterile filters are supplied in medical-grade…

  • 4mm Syringe Filters

    J.G. Finneran

    …quality. Visually inspected following quality specifications. Batch tested by an independent laboratory for external dimensions, bubble point, filter integrity, water flow rate, UV extractable and compliance with all technical procedures, manufacturing specifications and quality controls for…

  • 25mm Syringe Filters

    J.G. Finneran

    Finneran 25mm Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

  • …The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are…

  • Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable.

  • …specific application. Options include: Nylon syringe filters High-charge nylon syringe filters PES syringe filters PVDF syringe filters PTFE syringe filters Polypropylene syringe filters Cellulose acetate syringe filters Glass fiber syringe filters Regenerated cellulose syringe filters

  • SLFGR04NL

    MilliporeSigma

    These 0.2µm syringe filters are designed for particle removal and preparation of organic solvents and similar solutions prior to chromatography analysis or other instrument analysis. Syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration 4 mm Millex filters are…

  • …for quick and cost-effective sample processing Eliminates the need for separate syringes, syringe membrane filters, vials, and septa Designed for use with an HPLC or UHPLC autosampler for high-throughput analysis 0.2 µm and 0.45 µm pore sizes available to meet sample requirements Compatible with…

  • Polypropylene Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic Polypropylene membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low…

  • 25mm ABLUO™ Syringe Filters

    GVS Filter Technology

    …quality control: Syringe filters are integritytested to ensure a proper filter fit and weld to eliminate any potential filter by-pass. Accurate labeling: Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in its…

  • Cellulose acetate syringe filters are used for the filtration of volumes of up to 100mL. The syringe filter units are ideal for applications requiring maximum sample recovery such as: tissue culture preparation, sterile filtration and clarification of biological fluids, specimen solutions, protein…

  • One-step sample preparation in one-third the time Reduces cost while increasing productivity 0.2 or 0.45 µm filter 12 x 32 mm vials Replace syringe-coupled filtration devices and autosampler vials with a single, disposable unit Available in seven different membrane…

  • Minisart AIR

    Sartorius

    Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

  • Minisart GF

    Sartorius

    Minisart GF: Binder-free glass fiber depth filter for clarification of liquids heavily laden with coarse particles; or may be used as a prefilter for 0.2 µm or 0.45 µm Minisarts.

  • …Particulate Syringe Filters are designed for high throughput filtration of viscous and particle-laden solutions. The syringe filter contains a filter membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm or 0.45µm pore…

  • Whatman Uniflo Syringe Filters - consistent performance, maximum value. Whatman Uniflo Syringe Filters are disposable filter units designed to provide clean filtrate from small volumes up to 100mL - combining premium quality with economic efficiency. They are available in a variety of…

  • For filtration of dilute biological fluids. Sterilized by gamma irradiation to eliminate potential contamination by EtO residuals. Inlet/Outlet connections: 13/25 mm: Female Luer-Lok inlet, standard male slip luer outlet Pore size: 0.2 µm Diameter: 25mm

  • PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • PVDF Membrane Syringe Filters

    mdi Membrane Technologies

    mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

  • … High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are…

  • SLFG025NK

    MilliporeSigma

    …25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,…

  • …High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives…

  • Cytiva Whatman PolyVENT filters are integral venting filters that work bidirectionally to prevent contaminants from entering vessels like fermentation tanks during draining or filling. 0.2 µm hydrophobic PTFE air filters are ideal industrial air filter media Validated for 50 steam…

  • …filteredWide range of membranes with 0.2 and 0.45 µm pore sizes to meet specific requirementsAlso available in amber glass for light-sensitive samplesMini-UniPrep G2 is an all-in-one syringeless filter with a borosilicate glass chamber. It replaces syringe filters for autosampler-supported…

  • … The Aqueous IFD is designed to work as an in-line filter with mobile phases containing at least 20% of the aqueous component. It has a 0.2 µm hydrophilic nylon membrane to support aqueous-based HPLC mobile phase preparation. In-line filter construction and function Whatman Aqueous IFD have…

  • Ultra low leaching filters for Ion Chromatography sample preparation Alumina matrix Highly efficient retention of particles larger than stated pore size Low hold-up volume Offer better consistency of analytical results and longer column life Non-sterile Anopore…

  • mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought. These filters are ethylene…

  • Hydrophilic PTFE Membrane Syringe Filters

    mdi Membrane Technologies

    mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.