CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: PA…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use…

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

Minisart GF: Binder-free glass fiber depth filter for clarification of liquids heavily laden with coarse particles; or may be used as a prefilter for 0.2 µm or 0.45 µm Minisarts.

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for…

mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

Finneran 25mm Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: CA…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively…

EZFlow 13mm and 25mm Sample Prep Syringe Filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…

3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

Designed to filter viscous and organic solvent-based samples in a wide array of analytical and research applications Pure polyproylene housing Glass fiber prefilter Autoclavable Cameo GP filters feature a 1.0 micron borosilicate glass prefilter over a PolySep…

mdi Hydrophilic Polypropylene membrane Syringe filters type SYGP incorporate a hydrophilic polypropylene membrane with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of…

Syringe filters for convenient filtration of small sample sizes through membranes. This glass microfiber syringe filter can be used as a pre-filter to remove interfering particulates before filtering a sample through a membrane.

Finneran 25mm Glass Fiber Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to…

mdi microglassfiber syringe filters are specially designed for clarification of extremely viscous samples that may clog a membrane filter. These filters have microglassfiber media encased in a polypropylene housing. All mdi Syringe Filters are color coded for ease of identification and offer a…

The Hamilton 700 series 10 uL syringe is suitable for use with cemented needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a temperature rating of up to 10 to 50 degree C and pressure rating of up to 2000 psig. This syringe has a needle inner diameter of…

Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable.

Syringe filters for convenient filtration of small sample sizes through membranes. Nylon (Polyamide) membranes are hydrophilic and widely used in both aqueous and organic solvent filtration applications.They are best used in a pH range of 3-14 and at an operating temperature below 100 degrees Celsius.

Minisart NY25 Plus: Rapid small volume filtration and sterilization of solvent-based samples and difficult to filter aqueous solutions. NY25 X Plus includes a ployamide (Nylon) memrane with a binder- free glass fiber depth pre-filter.

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than…