Syringe, Filters, Cannabis, MilliporeSigma
-
SLFH025NK
MilliporeSigmaThis 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to…
-
SLLGR04NL
MilliporeSigmaAn essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in…
-
NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …
-
Millex® Syringe Filter Units with Durapore (PVDF) Membranes
MilliporeSigmaNon-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…
-
SLHVR33RB
MilliporeSigmaA 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to…
-
Millex® Syringe Filter Units with Hydrophilic PTFE Membranes
MilliporeSigmaNon-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…
-
SLGPR33RB
MilliporeSigmaA 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation
-
SLGPM33RS
MilliporeSigmaA 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation
-
NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables -…
-
SLVVM33RS
MilliporeSigmaA 33 mm diameter sterile syringe filter with a 0.1 µm pore size hydrophilic PVDF membrane. Designed for sterilizing protein solutions, tissue culture media, buffers and additives Feature a Millipore Durapore® PVDF membrane and are the lowest protein-binding syringe filters…
-
SLHNM25NS
MilliporeSigmaThis 25 mm syringe filter with a Graduated Glass Fiber & Nylon membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of aqueous & mild organic solutions with high particulate levels. Low-extractable polyethylene housing Female Luer-Lok™…
-
SLGVM33RS
MilliporeSigma33 mm Medical Millex Filter Units A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 μm from aqueous solutions. 33 mm…
-
SLGS025NB
MilliporeSigmaThis 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.22 µm pore size used in Fine particle removal from aqueous solutions. Designed for fine particle removal from aqueous solutions Polyvinyl Chloride (PVC) housing Hydrophilic…
-
SLFH025NS
MilliporeSigmaThis 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. For removing particulates, reducing signal-to-noise ratios and maintaining flat baselines Hydrophobic PTFE Membrane is…
-
MILLEX® Sterile Syringe Filters Hydrophobic PVDF Membranes
MilliporeSigmaA 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophobic PVDF membrane. Super hydrophobic membrane for Transducer protection Clear PVC housing material Ethylene oxide sterilized Comes in a pack of 50
-
MILLEX® Sterile Syringe Filters Hydrophilic PTFE Membranes
MilliporeSigmaA 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50
-
SLHVM33RS
MilliporeSigmaA 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than…
-
SLLGC13NL
MilliporeSigmaThis 13 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in clarification of aqueous & mild organic solutions for ion chromatography. Disposable syringe-operated filter units certified for ion chromatography sample…
-
Millex® Syringe Filter Units with Nylon Membranes
MilliporeSigmaNon-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…
-
SLFG025NK
MilliporeSigmaThis 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,…
-
SLHVM25NS
MilliporeSigmaThis 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents Non-sterile
-
Millex® Syringe Filter Units with Hydrophobic PTFE Membranes
MilliporeSigmaNon-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10…
-
MILLEX® Sterile Syringe Filters Hydrophilic MCE Membranes
MilliporeSigmaSTERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…
-
SLFH025NB
MilliporeSigmaAn essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in…