These PYREX® three neck flasks have two vertical side necks with full length outer Standard Taper joints and a larger vertical center neck with a full length Standard Taper joint.

A compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. Indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. Approximately three theoretical plates at 60mL/hr. Hold up to…

These 125mL heavy duty PYREX® distilling flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers…

This kit contains essential components for short path distillation. All glass parts are manufactured from high quality 3.3 borosilicate glass. Short Path Distillation Head (two included in the kit) with 24/40 flask joints features a condenser coil and three ¼” hose nozzles, two for…

Convenient package includes a table type buchner funnel, neoprene stopper, medium flow filter paper, food grade tubing, radiator clamps and a coupler. The tubing has a temperature range of -40° to 125 °F and it meets FDA standards and NSF 51. Our Desktop Winterization Labware Kit is…

Each convenient package includes a filtering flask, buchner funnel, filter adapter set, and medium flow filter paper. Filtering flasks are from our FG5340 series. They are constructed using heavy wall borosilicate and include a thick rim and hose barb. The 10,000ml set includes our FFB5340 series…

Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are vertical Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

The Soxhlet Distillation Apparatus is typically used when a compound has a limited solubility or when the impurity is insoluble in a solvent. It efficiently recycles a small amount of solvent to dissolve a large amount of material. Instructions included. Includes: 1 Allihn condenser…

These 500mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint.

These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height

These PYREX® three neck flasks have two angled side necks at the same height with Standard Taper outer joints and a larger center neck with a vertical Standard Taper joint.

Full size 24/40 jointed, low holdup, short path still, original plain version or jacketed with indents. Extension tube from still body allows positioning of drop directly over receiver flask. Gas inlet tube is positioned in distillation flask with 5028 Adapter and secured with a #7 Ace-Thred.…

Made of high quality, heavy duty borosilicate glass Features 3 angled necks with ground glass sockets Round bottom Conforms with DIN 12394 standards Perfect for any professional or home laboratory Distilling round-bottom boiling flasks made of high quality, heavy-duty…

For the determination of water in petroleum and bituminous materials, these borosilicate glass Bidwell-Sterling moisture traps collect liquefied vapor. They feature a connection between top of vapor tube and graduated tube. This construction allows excess solvent to return to flask with minimal…

These distillation flasks are made from high-quality borosilicate glass. They come with a thermometer holder and a ground glass stopper. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth…

These PYREX® multiple neck flasks have three vertical side necks with outer Standard Taper joints placed 90° apart and a larger center neck with a vertical Standard Taper joint.

These 25mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 0 rubber stopper.

Used in testing for soluble and insoluble cyanides in water. Basically conforms to ASTM D 2036 (excluding modifications). Flask is 1L with 24/40 joint and #7 Ace-Thred permitting variable depth positioning of fill tube which has a float valve for added protection against boil back. Jacketed still…

Used for limit test for arsenic as described in European Pharmacopeia, 1997, page 51. Complete consists of 125mL conical flask with 24/40 joint, a capillary chimney with a pulled tip below 24/40 joint at bottom, #5 O-Ring joint at top with hooks for 3/4" springs, and an adapter tube with #5 O-Ring…

Distilling round bottom flask with two vertical necks. Two-neck heavy wall flask with Standard Taper outer joints on both vertical necks Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

KIMAX distilling flask. The sidearm tube is sealed at an angle of 75 º from the neck and is 137 ± 3 mm from the bottom of the flask. It is designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802.

These 500mL PYREX(r) distilling flasks are used for the distillation of bituminous materials suitable for road treatment. Also used in the Standard Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association, method 11e, Barrett method C 9, American Association of State…

These PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height.

Kontes™ flask with three angle necks for heating, stirring and solvent stripping without impairing ease of liquid and solid transfer. Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable…

For exhaustive distillation of pesticides and industrial chemicals from water, sediments and tissue, and the simultaneous extraction of the distillate by a small volume of organic solvent. The addition of a bulb condenser in place of the straight tube condenser results in more efficient condensing…

Used for volatile fatty acid test; ASTM D-1076. Fabricated from standard wall tubing throughout. Hose connections on still are size D; on condenser, size C.

Similar to Congealing Temperature apparatus described in U.S.Pharmacopeia, 1995, pages 1780, except this apparatus is supplied with Ace-Threds in place of rubber stoppers, where practical. #50 thread at center holds a test tube with a #25 bushing, open top test tube utilizes a rubber stopper to…

Used for the determination of sulfites in food and related product, this Monier-Williams Sulfites distilling apparatus is made of borosilicate glass and has Standard Taper 24/40 outer and inner joints. The complete unit consists of a special outlet adapter with a double bend, a 300mm long Allihn…

Single long neck flask with a Standard Taper outer joint Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

KIMAX® apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a 19/38 joint Supplied with a Standard Taper stopper Condenser is Graham-style, having a 200 mm jacket with a 19/38 joint at the top only For…

Apparatus for converting simple and most complex cyanides into HCN and for from most interferences before measuring by titration or colorimetric analysis examination of industrial wastes and other water. Method is described in Standard the Examination of Water and Wastewater. Fourteenth Edition,…

Generally used for the determination of ammonia in water. Joints are standard taper 24/40.