Thermometer Holders

Compare Tool

Select up to 3 products

Thermometer Holders
1 - 32 of 36
Sort
View
Show


Thomas TraceableLive

  • Holder has 5 Holes of Assorted Diameters Holds Thermometers,Test Tubes, Electrodes, etc. Stainless Steel Clip and Platform with Rubber Pads

  • Suspends 6 to 13 mm thermometers over water bath. C clamp holder fits bath walls up to 9 mm thick. Overall length is 64 mm.

  • Clips for Beakers and Pitchers

    Bel-Art - SP Scienceware

    …the slot and then the holder can be clipped onto the container’s edge Smooth polypropylene surface may be marked with identifying sequence numbers Autoclavable 0209X17: Thermometer Holder for Beakers Easy-to-use, polypropylene clips hold thermometers and probes from 3.2 to…

  • With five hole sizes ranging from 3.5mm to 14.5mm, this holder accommodates various thermometers including liquid in glass, electronic with probe, and bimetal with probe. The stainless steel, spring loaded clip attaches securely to laboratory containers, shelves up to 3/8” thick, and more.…

  • Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • Chemical resistant probe Safer than mercury thermometers Large, bright LCD Switchable thermometers fit into cuvettes, test tubes, flasks and beakers. Stainless steel probe is resistant to most laboratory chemicals. Readings are updated every second. Operate continuously for over a year on a…

  • …to 8847T32, but with two single buret clamps mounted 4” (100 mm) apart on crossbar to simultaneously hold two burets, tubes, rods, thermometers, etc. 8847T36 clamp is similar to 8847T32 but for columns, large tubes, etc.; opens to 1 3/4”; clamp mounts into either closed connector,…

  • Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Temperature Controller

    Stuart (Cole-Parmer)

    …temperature probe can be held securely by the in-built probe holder. A range of accessories is available to allow for a complete set up of temperature controller, probe and stirrer hotplate in the laboratory. An accessory probe holder clamps on to a retort rod to allow secure positioning of the…

  • Thermometer designed for our Microscale spinning band Hickman-Hinkle column. Organic liquid filled with a yellow backing. Each thermometer is serialized and includes a Statement of Accuracy indicating traceability to NIST standards. 8 inch length with a 50mm immersion. Order code -40 retaining ring…

  • Thermometer Holder

    Ace Glass

    Used in various Mini-Lab assemblies to hold standard chemical thermometer.

  • …jackets. Cascade hermetic refrigeration system provides reliable long term service. Bath interior and cabinet is constructed entirely of stainless steel. Floor model rides on swivel castors. Supplied with test jackets, gaskets, disks, and thermometer holders for test jars and cooling baths.

  • …all CDC thermometer requirements. Records high/low readings Easy-to-read digital display shows high, low, and current temperatures. MIN/MAX monitors high/low readings overnight, on weekends, or for any time period—a significant advantage over impossible to read glass thermometers

  • …chemicals Supplied:  Thermometer, stainless-steel probe, stainless steel spring-loaded holder, wall mount, 4 AAA alkaline batteries, Traceable ® Certificate Control Company Cat. No. 6406 Traceable® Extra-Extra Long-Probe Waterproof Thermometer Please note: The…

  • … Bath surface is black ceramic coated steel for improved visibility of tissue sections Equipped with pilot light, dust cover, thermometer holder and non-skid rubber feet Has separate on/off switch, pilot light, and thermostat Durable and inexpensive Rapid heat-up…

  • Universal Implement Stand

    Bel-Art - SP Scienceware

    Keep Rounded Items from Rolling off the Bench Secure pipettes, stirring rods, burettes, thermometers, pencils, and more in this handy holder with semi-circular notches. Especially useful as a sterile hood tool Molded of polypropylene Dimensions: 8.3cm dia. x 5.9cm H…

  • Tube 19/22

    Corning

    These PYREX® thermometer adapters have a 19/22 Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a…

  • This Corning® rubber thermometer holder has a 17mm O.D. and a 13mm I.D. and is designed for use with the No. 7711 mercury thermometer. It is a replacement part for organic chemistry kits Nos. 6949-6949K.

  • VEE GEE Dial Thermometers are an excellent choice for many applications including food & beverage quality control, general lab use, asphalt/concrete testing, and soil & compost testing. A wide variety of ranges are available in the three separate sizes. The smaller stem and face of the…

  • …when ordering). Both models are mounted on a sturdy cast iron base. Included Accessories Brass Test Cup with Handle Thermometer Holder Cover Assembly Specifications Conforms to the specifications of: ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM…

  • …indicated by thermometer passed through thermometer holder at top of oven Double-walled, aluminum, enameled steel exterior and glass wool insulation; mounted on rubber feet Door has continuous hinge, latch and spring catch Two removable, nickel-plated wire shelves and thermometer are…

  • PYREX® thermometer adapters have a Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder.

  • Tube 24/40

    Corning

    These PYREX® thermometer adapters have a 24/40 Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a…

  • … Traceable® Platinum Hi-Accuracy Thermometer with minimum/maximum readings for last 24-hours, 7-days, 30-days; with stainless steel handle probe and adjustable probe holder (patents pending) 1208T88: Traceable® Platinum Hi-Accuracy Thermometer with minimum/maximum readings for last…

  • Flask Distillation

    GSC International, Inc.

    These distillation flasks are made from high-quality borosilicate glass. They come with a thermometer holder and a ground glass stopper. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth…

  • …insulation around interior aid in cold retention. Chamber comes supplied with copper jackets, gaskets, disks, and thermometer holders for test jars and cooling bath. Test jars and thermometers must be ordered separately. Mechanically Refrigerated Baths Bench and floor model test units feature…

  • Organic Chemistry Set

    GSC International, Inc.

    …Round-bottom flask, 100ml 1 Round-bottom flask, 50ml 1 Round-bottom flask, 25ml 1 Separatory funnel, 100ml 1 Bleed tube 1 Thermometer holder 1 Thermometer adapter 1 Three-way adapter 1 Vacuum adapter 1 Claisen adapter 1 Stopper PRODUCT WARNINGS WARNING: This…

  • …Pear-Shaped Separatory Funnel (6412A-125) PYREX® Stopper, (7575-14) Bleed Tube (7815-19) Adapter Tube w/ Thermometer Opening (8821-14) Rubber Thermometer Holder (7715) Vacuum Connecting Tube (8947-14 ) 3-Way Connecting Tube (9050-14) Claisen Connecting Tube (9050-14) …

  • …125mL Pear-Shaped Separatory Funnel (6413-125) PYREX® Stopper, 7575-19) Bleed Tube (7815-19) Adapter Tube w/ Thermometer Opening (8821-19) Rubber Thermometer Holder (7715) Vacuum Connecting Tube (8947-19) 3-Way Connecting Tube (9000-19) Claisen Connecting Tube (9050-19) …

  • Distilling Kits

    GSC International, Inc.

    …glass, is intended to produce botanical essential oils. Includes: 1 Erlenmeyer Flask, 500ml (#EF500) 1 Distillation Flask with Thermometer Holder, 1L with a 24/40 ground glass joint (#FLSK-24-40-1L) 1 Biomass Flask 1 Distilling Arm with a 45/50 ground glass joint (#4009-45-50) 1…

  • …viscometers placed in the bath. The top cover contains seven round holes 51 mm (2") in diameter for insertion of viscometer holders and two additional holes for thermometers. Twin fluorescent lamps provide glare-free illumination. A built-in cooling coil permits operation at or slightly below,…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.