Three Neck Flask

Compare Tool

Select up to 3 products

Three Neck Flask
1 - 32 of 202
Sort
View
Show
  • Angled Three Neck Round Bottom Flask

    Kimble

    Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • SYNTHWARE Round Bottom Angled Three Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • NMR Stoppers

    Plasticoid

    Hollow plug to fit inside bottles, flasks, vials, or tubing with a sleeve to pull over neck to create a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on…

  • Tissue Culture Flasks, Canted Neck Design

    Corning

    …of anchorage dependent cells. Canted neck for easy access to growth surface. A choice of phenolic style caps, plug seal caps and vented caps for sterile gas exchange. The 75 cm 2 canted neck tissue culture flask has a wide mouth for easy pipet access. All flasks are individually pressure tested and…

  • Flask, Three Necks, Jacketed, Heavy Duty

    Ace Glass

    Round bottom flask with three in-line necks. Fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Jacket inlet/outlets are available with either tangentially sealed 28/15 o-ring ball joints or with #11 Ace-Thred connections

  • SYNTHWARE Round Bottom Vertical Three Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • PYREX® Three Neck Distilling Flask with Center Vertical and Side Angled Neck…

    Corning

    These PYREX® three neck flasks have two angled side necks at the same height with Standard Taper outer joints and a larger center neck with a vertical Standard Taper joint.

  • PYREX® Three Neck Micro Distilling Flasks, Angled Necks, Standard Taper Joints

    Corning

    These PYREX® three neck micro distilling flasks have two angled side necks at the same height with outer Standard Taper joints and a center neck with a vertical Standard Taper joint.

  • Round Bottom Vertical Angled Three Neck Flasks

    Wilmad LabGlass

    This borosilicate glass round bottom flasks has three necks - the center neck is vertical and the side necks are 180° apart and are inclined at an angle of 20° to the vertical. All necks have Standard Taper outer joints.

  • SYNTHWARE Round Bottom Three Neck Flasks with Bottom Outlets

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with a bottom outlet. Both the center neck and the vertical side necks are standard taper outer joints. The lower outlet is a 4mm straight bore PTFE stopcock. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • Round Bottom Three Vertical Neck Flasks

    Wilmad LabGlass

    Available in various sizes, these borosilicate glass round bottom flasks have three vertical necks with Standard Taper outer joints. The side necks are 180° apart.

  • Flask, Three Necks, Angled

    Ace Glass

    Round bottom flask, three necks with angled sides. All joints are standard taper. Available in standard and heavy wall.

  • Three Vertical Neck Round Bottom Flasks

    Kimble

    Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are vertical Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Flask, Flat Bottom, Three Neck

    Ace Glass

    Flat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.

  • Flask, Round Bottom, Three Neck

    Ace Glass

    With outer joints with side necks angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Round bottom, three neck flask with angled sides. All joints are standard taper. Available in standard and heavy wall.<

  • Flask, Round bottom, Three Neck

    Ace Glass

    Round bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced…

  • Flask, Round Bottom, Three Neck

    Ace Glass

    Round bottom flasks, three vertical necks, standard taper outer joints, standard and heavy wall. Flasks feature a flare-out directly below the center joint to facilitate cleaning and removal of stir blades.

  • PYREX® Three Neck Distilling Flask with Vertical Neck Standard Taper Joints

    Corning

    These PYREX® three neck flasks have two vertical side necks with full length outer Standard Taper joints and a larger vertical center neck with a full length Standard Taper joint.

  • PYREX® Three Neck Distilling Flask with Vertical Neck 24/40 Standard Taper…

    Corning

    These PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height.

  • PYREX® 250mL Three Neck Distilling Flask with 19/22 Center Vertical and Side…

    Corning

    These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material:     Borosilicate Glass…

  • Instatherm Flask, High Temp Type, Three Necks

    Ace Glass

    …standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks. Three-prong connector plug is designed to work with Ace temperature controllers where the output voltage can be automatically limited to match flask. Flask can also be matched with ACE temperature…

  • Flask, Round Bottom, Three Neck, Spherical joints

    Ace Glass

    Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.

  • Costar Rectangular Canted Neck Cell Culture Flask

    Corning

    …certified non-pyrogenic. Flasks are 100% integrity tested and feature printed lot numbers for ease in traceability. Canted neck flasks allow easier pouring and improved access to the flask for pipetting or scraping. Rectangular flasks have a ramp from the bottom to the canted neck for easier pouring…

  • Reaction Flask Head, Four Neck

    Ace Glass

    Head with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For…

  • PYREX® Long Neck Boiling Flask

    Corning

    These 100mL PYREX(r) round bottom boiling flasks have long necks with tooled mouths and take a rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater…

  • PYREX Plain Neck Baffled Culture Flask

    Corning

    Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.

  • CellBind Rectangular Canted Neck Cell Culture Flask

    Corning

    …certified non-pyrogenic. Flasks are100% integrity tested and feature printed lot numbers for ease in traceability. Canted neck flasks allow easier pouring and improved access to the flask for pipetting or scraping. Rectangular flasks have a ramp from the bottom to the canted neck for easier pouring…

  • CellBind Angled Neck Cell Culture Flask

    Corning

    …cells to reduced serum or serum-free conditions Reduces premature cell detachment from confluent cultures 175 or 225 cm 2 sizes Angled neck cell culture flasks have been treated with a patented Corning® CellBIND® surface treatment for optimal cell attachment. Manufactured from optically clear…

  • Triangular Straight Neck 75cm Cell Culture Flask

    Corning

    …construction 75 cm 2 triangular straight neck cell culture flasks have been treated for optimal cell attachment. Manufactured from optically clear virgin polystyrene, they are sterilized by gamma irradiation and certified nonpyrogenic. Flasks are100% integrity tested and feature printed lot…

  • PYREX® Four Neck Distilling Flask with Center and Side Vertical Neck Standard…

    Corning

    These PYREX® multiple neck flasks have three vertical side necks with outer Standard Taper joints placed 90° apart and a larger center neck with a vertical Standard Taper joint.

  • Triangular Angled Neck Cell Culture Flasks

    Corning

    … Polystyrene construction Triangular angled neck cell culture flasks have been treated for optimal cell attachment. Manufactured from optically clear virgin polystyrene, they are sterilized by gamma irradiation and certified non-pyrogenic. Flasks are100% integrity tested and feature printed lot…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.