Boiling Flasks

Compare Tool

Select up to 3 products

1 - 32 of 34
Sort
View
Show
  • Flask, Round Bottom, Three Neck

    Ace Glass

    Round bottom flasks, three vertical necks, standard taper outer joints, standard and heavy wall. Flasks feature a flare-out directly below the center joint to facilitate cleaning and removal of stir blades.

  • Flask, Single Neck

    Ace Glass

    Round bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.

  • Flask, Round Bottom, Four Neck

    Ace Glass

    Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. 500ml and smaller flasks have angled side necks while larger sizes feature vertical necks. Available in heavy wall.

  • Flask, Three Necks, Angled

    Ace Glass

    Round bottom flask, three necks with angled sides. All joints are standard taper. Available in standard and heavy wall.

  • Flask, Single Neck

    Ace Glass

    Round bottom flask with a single neck. Available in heavy wall.

  • Flask, Two Neck, Angled Side Neck

    Ace Glass

    Two neck, one center and one angled side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.

  • Flask, Single Neck, Spherical, Receiving

    Ace Glass

    With short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.

  • Flask, Round Bottom, Five Neck, 90 degree Front & Back

    Ace Glass

    Round bottom flask with five necks arranged 3 in-line, two 90 degrees front and back of in-line necks. All necks are vertical. Available in heavy wall.

  • Flask, Round Bottom, Four Neck

    Ace Glass

    Round bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.

  • Flask, Boiling, Quartz

    Ace Glass

    Quartz boiling flask.

  • Flask, Round bottom, Three Neck

    Ace Glass

    Round bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced…

  • Flask, Round Bottom, Four Neck, Ace-Thred

    Ace Glass

    Round bottom flask with four necks arranged 3 in-line and one #7 Ace-Thred neck (ideal for suspending a thermometer or probe) at 90 degrees. The 500ml and 250ml sizes have angled side necks while the larger sizes feature vertical necks. Available in he

  • Flask, Round Bottom, Beaded Tube Port or Well

    Ace Glass

    Round bottom, single neck flask with either a beaded tube end port or a beaded tube end well. Well I.D. on 6935-03 thru 6935-17 is approximately 9.5mm. Well I.D. on 6935-64 thru 6935-78 is approximately 9mm.

  • Flask, Two Necks, Vertical

    Ace Glass

    Two neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.

  • Flask, Round Bottom, Ace-Thred Side Port

    Ace Glass

    Round bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.

  • Flask, Round Bottom, Three Neck

    Ace Glass

    With outer joints with side necks angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks. Round bottom, three neck flask with angled sides. All joints are standard taper. Available in standard and heavy wall.<

  • Flask, Round bottom, Two Neck

    Ace Glass

    Round bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.

  • Flask, Two Necks, Angled

    Ace Glass

    Round bottom with outer joints and side neck angled. Available fabricated with heavy walls, approximately 30% heavier than regular wall flasks.,/p>

  • Flask, Round Bottom, Beaded Tube Port

    Ace Glass

    Round bottom, single neck flask with a beaded tube end port.

  • Flask, Round Bottom, Three Neck, Spherical joints

    Ace Glass

    Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.

  • Flask, Round Bottom, Ace-Thred Side Port

    Ace Glass

    Round bottom, single neck flask with Ace-Thred side port supplied with our 5029-10 nylon bushing and 7855-704 FETFE o-ring. Bushing is ideal for use with thermometers or bleed tubes of up to 7mm OD. Available in standard and heavy wall versions.

  • Flask, Round Bottom, Stopcock Septum Port

    Ace Glass

    Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.

  • Flask, Round Bottom, Septum Port

    Ace Glass

    Round bottom, single neck flask with septum port for use with air-sensitive material. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.

  • Flask, Round Bottom, Septum Port

    Ace Glass

    Round bottom, single neck flask with septum port for use with air-sensitive material. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.

  • Flask, Two Necks, Spherical

    Ace Glass

    Round bottom flask with two socket joints.

  • Flask, Single Neck

    Ace Glass

    Round bottom flask with a single neck. Available in heavy wall.

  • Flask, Round Bottom, Five Neck, Ace-Thred

    Ace Glass

    Round bottom flask with five necks arranged 3 in-line, one standard taper front and one #7 Ace-Thred front (ideal for suspending a thermometer or probe). All necks are vertical. Available in heavy wall. Supplied complete with a 5029-10 nylon bushing an

  • Distillation Apparatus, Methoxy Determination

    Ace Glass

    Used for methoxy determination as described in U.S. Pharmacopeia, 1995, page 1742. Complete consists of 20 mL boiling flask with 14/20 joint and a capillary side arm, scrubber trap column with 14/20 inner and 35/20 socket, and an absorption tube with 35/20 ball joint and a 2mm bore glass stopcock.…

  • Flask, Single Neck

    Ace Glass

    With long neck and standard taper 24/40 outer joint.

  • Flask, Single Neck for 6810 Giant Extraction Apparatus

    Ace Glass

    Round bottom, single neck flasks design for use with our 6810 series giant extractor apparatus.

  • Flask, Round Bottom, Four Neck

    Ace Glass

    Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.

  • Flask, Round Bottom, Stopcock Septum Port

    Ace Glass

    Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.