Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 70mm Flask size: 500ml Dimensions: 110 x 180mm Sidearm cap: 45mm

Convenience The disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Confidence Molded from virgin polystyrene and gamma-irradiated, each spinner flask system assures a…

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 170" x 110" Flask size: 500ml

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 295" x 165" Flask size: 3l

Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings.

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 165 x 290mm

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 70mm Flask size: 100ml

Bell-Flo iob assembly was designed to be used with the bell-flo vessel with bottom indents and 3 vertical baffles for optimal mixing. Rugged stainless steel ptfe internal bearing impeller assemblies utilize a wing style impeller blade that increases mixing and oxygenation to your cell culture. Cap…

Manufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Sizes: 100ml Center cap size: 70mm Sidearm size: 32mm

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 290" x 165" Flask size: 3l

Manufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Size: 8l Center cap: 100mm Sidearm cap: 45mm Dimensions: 430" x 237"

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 500ml Dimensions: 110 x 180mm Sidearm cap: 45mm

Manufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Size: 6l Center cap: 100mm Sidearm cap: 45mm

The SST 45mm compression & hose barb cap assembly is designed with a 1/4" id compression fitting for insertion of tube accessories and 1/4" od hose barb for silicone tubing attachment. The compression fitting is supplied with a nylon ferrule for easy adjustment of tubes. A blue polypropylene open…

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately

MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two angled sidearms…

The Corning 1L and 3L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are made of USP Class VI and ISO 10993-18 compliant materials. Extended paddle design ensures constant top-to-bottom motion of the liquid without…

Manufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Size: 100ml Center cap size: 70mm Sidearm size: 32mm

Bell-Flo iob assembly was designed to be used with the bell-flo vessel with bottom indents and 3 vertical baffles for optimal mixing. Rugged stainless steel ptfe internal bearing impeller assemblies utilize a wing style impeller blade that increases mixing and oxygenation to your cell culture. Cap…

ADAPTERS, CLAISEN, MINUM-WARE®, Useful for addition of reagents to moisture sensitive reactions. Lower inner and top outer threaded joints all are 14/10 size. Supplied complete with two open-top screw caps (MW-102-33), PTFE faced septa (MW-104-33) and Viton o-rings (MW-100-08). CONDENSERSS,…

Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 110 x 175mm

Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 36l Dimensions: 410 x 545mm Sidearm cap: 45mm

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1300ml Cap size: 100mm Sidearm cap size (mm): 45mm

Manufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Bottom indents & three vertical baffles for optimal mixing 32mm or 45mm sidearms for port assemblies Rugged stainless steel/ptfe internal bearing assemblies Center cap:70mm Sidearm cap:32mm…

Internal impeller is useful because it decreases risk of contamination. Has an adjustable shaft to align the paddle. Large paddle promotes increased oxygenation. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. The sealed internal assembly requires less incubator…

Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Thermowell assemblies for 1965 and 1967-style angled sidearm…

Manufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Size: 1l Center cap: 100mm Sidearm cap: 45mm

These disposable high density polyethylene sterile vent caps contain a 0.2 µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500 mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications requiring increased gas exchange. They…

Internal impeller is useful because it decreases risk of contamination. Has an adjustable shaft to align the paddle. Large paddle promotes increased oxygenation. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. The sealed internal assembly requires less incubator…

The 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4? tubes. The vessel has an internal impeller assembly with stainless steel ball…

Adjustable spinner height. Ptfe impeller assembly rides on glass bearings for friction free operation. 25ml & 50ml have black phenolic rubber lined caps. 100ml-300ml have polypropylene caps, silicone gasket and pouring rings. Flask has flat bottom (no dimple) Center (mm):51 Sidearm (mm):18 Od x oah…

For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 250ml Cap size: 70mm Sidearm cap size (mm): 25mm