Distillation Flask

These 25mL PYREX® distilling flasks are suitable for microchemical applications. The sidearm is approximately 77mm below the top of the neck at an angle of 75°. Adaptable for use with thermometers calibrated for 76mm immersion. Flasks take a No. 0 rubber stopper.

… Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No. 4; 1,000 mL flask stopper No. 6.

These 500mL PYREX(r) distilling flasks are used for the distillation of bituminous materials suitable for road treatment. Also used in the Standard Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association, method 11e, Barrett method C 9, American Association of State…

These 125mL heavy duty PYREX® distilling flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers…

KIMAX distilling flask. The sidearm tube is sealed at an angle of 75 º from the neck and is 137 ± 3 mm from the bottom of the flask. It is designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802.

These PYREX® multiple neck flasks have three vertical side necks with outer Standard Taper joints placed 90° apart and a larger center neck with a vertical Standard Taper joint.

These PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height.

These PYREX® three neck flasks have two angled side necks at the same height with Standard Taper outer joints and a larger center neck with a vertical Standard Taper joint.

These PYREX® three neck flasks have two vertical side necks with full length outer Standard Taper joints and a larger vertical center neck with a full length Standard Taper joint.

…vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material:     Borosilicate Glass Code 7740 Capacity:     250 mL Flask Style:     Distilling Flask Shape:     Multi Neck Top…

Radial style distillation receiver allows four flasks to be progressively filled. Upper vacuum adapter is bent at a 105º angle. Complete item consists of a vacuum adapter, distribution adapter, four of the listed size flasks with hooks and ten CG-110 stainless steel springs.

…quality borosilicate glass parts and all hardware necessary for simple distillation experiments. Includes: 500ml Round Bottom Borosilicate Flask with Side Tube 300mm Graham Condenser 250ml Erlenmeyer Flask Glass Stopper Support Stand (6"X9") with 24" Rod …

With 10/30 joint for a 25 mm immersion thermometer. All other joints are 14/20. Hose connections project to rear. Round-bottom and pear-shape flasks supplied with complete unit are 25mL capacity. Hose connections on still are size A.

KIMAX® apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a 19/38 joint Supplied with a Standard Taper stopper Condenser is Graham-style, having a 200 mm jacket with a 19/38 joint at the top only For…

Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port. Distillation head is manufactured from high quality 3.3 borosilicate glass and features a condenser coil and three 1/4" hose nozzles, two for condenser and one for vacuum.

…Tube. The Thermometer, with a range of -10° to 50° C and filled with a petroleum-based solution with red dye, connects to the Distillation Head through the 10/30 port. Penny Head Glass Stoppers are included to cap the 50ml Single Neck round bottom flasks after distillate is collected.

…round bottom flasks after distillate is collected. PLEASE NOTE: Lab Jacks, Support Stands, Flask Stands, and Extension Clamps with Bosshead are not included in this kit. Contents: Short Path Distillation Head, Vacuum Jacketed, 24/40, 34/45 . . . . . . . . 2 Flask, Round Bottom,…

Distillation receiver carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be…

Placed above a boiling flask to prevent foaming-type reactions from entering either the distilling column or the condenser. Useful with rotary evaporators 517000 features a more extensive baffle system than other traps Manufactured from 33 expansion, low extractable borosilicate glass…

…of solvents or other volatiles by vacuum distillation at ambient temperature. When used with Schlenk reaction Vessel, No. 7756, the trap prevents excessive loss of solution in the event of a bump. The distillate is collected in a No. 9477 pear shaped flask or other suitable receiver and cooled by…

…allow total drainage of storage head. Double oblique 2mm bore PTFE stopcock on the 250 through 1000mL sizes allows for removal of distilled solvent or return to flask. The 250mL size has a 4mm double oblique stopcock. Both the uptake tube and top outer joints are 24/40, while the take-off tube is…

…The first bubbler acts as a scrubber to remove sulfides. Cyanide is absorbed in the second bubbler. Apparatus includes inlet tube, reflux body, cold-finger condenser, 1000 mL flask with center and side necks, hose adapter, scrubber tube, scrubber flask, absorber flask, dispersion tube and clamp.

Alginates assay distillation system similar to the one described in US Pharmacopeia 2006, chapter 311. The system includes a metering valve with flow meter tube set, 250mL flask and mantle, reflux condenser with u-tube and hose connection adapters and a 250mL gas washing bottle. 5/16 in ID Vinyl…

With 2mm glass stopcock and 24/40 joint. Supplied with a special 25mL long-neck flask for small volume efficiency.

Used for volatile fatty acid test; ASTM D-1076. Fabricated from standard wall tubing throughout. Hose connections on still are size D; on condenser, size C.

Used in testing for soluble and insoluble cyanides in water. Basically conforms to ASTM D 2036 (excluding modifications). Flask is 1L with 24/40 joint and #7 Ace-Thred permitting variable depth positioning of fill tube which has a float valve for added protection against boil back. Jacketed still…

…heater unit for convenient pairing. Includes graduate support block and flask support boards. Designed for testing of Grade No. 2 fuel oil, Grade number 2-D diesel fuel oil, gas oils, and other distillates requiring condenser bath temperatures of up to 140°F (60°C). Equipped…