Contec Delicate Lab Cleaning Wipes
-
Contec's PROSAT® Sterile™ Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT®…
-
Polynit Wipes
ContecThe Polynit Wipe is made from filament polyester and is knitted in a special stitch which reduces degradation of the wipe and subsequent particle generation. The Polynit Wipe is specifically designed for ISO Class 5 or cleaner environments and is exceptionally low in particles and extractable…
-
Canister for SATWIPES®
ContecCanister for SATWIPES® 6" x 9" (15.2 x 23 cm) rolls saturated with IPA less (CSCN0050) or greater (CSCN0100) than 70% with reinforced snap-close lid, replacement part Contec, Inc. products are intended for sale/shipment within North America only. International…
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
Presaturated nonwoven polypropylene wipes are designed for ISO Class 5 environments. Wipes are dispensed from a center-pull canister. For general-purpose cleaning and surface preparation SATWipes® consist of a roll of saturated wipes dispensed through a center-pull canister with…
-
MicroGenesis™ Wipes
ContecMicroGenesis™ delivers the maximum amount of microfiber to pick up and retain particles dust and other contaminants in cleanrooms and other critical applications. For dry applications where particle pickup and retention is critical MicroGenesis delivers unprecedented performance. The…
-
TuffStuff™ Wipes
ContecTuffStuff are high quality critical task wipes. Available in light, medium and heavy duty, these wipes are solvent resistant and maintain their strength even when wet. TuffStuff wipes offer exceptional durability and cleanliness. TuffStuff Wipes are available in multiple sizes, weights, and…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
Anticon® Gold Sorb™ Wipes
ContecAnticon Gold Sorb is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics. The proprietary sealed edges of these wipes allow the use of 100% of the wipe for cleaning without the worry of…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
Contec’s Slide ‘n Seal Bag is a resealable bag that allows easy dispensing of PROSAT® Polywipe-C presaturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed. Currently,…
-
SATWIPES® Delta™ Wipes
Contec100% polyester nonwoven fabric Saturated with various blends of IPA and DI Water Custom solvent and disinfectant capabilities; contact your Contec sales representative for details Dispensed from center-pull rolls in a re-useable canister Presaturated wipe refills available Strong and…
-
Polynit Heatseal Wipes are made of 100% knitted textured polyester with laser sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic…
-
PROSAT® Delta™ Wipes
ContecPROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT PS-Si Delta Wipes provides the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
Nonwoven, meltblown polypropylene presaturated wipes Solvent: 70% isopropanol/30% deionized water Very low levels of sodium and other ions Resealable pouch preserves cleanliness and…
-
The Thermo Scientific Orion™ Contec fluoride analyzer is mainly used in research facilities and chemical laboratories to conduct fluoride analysis. It helps in early fluoride detection and ensures reduced time consumption for analysis. It is convenient to use and easy to install. Meets CE, CSA, UL…
-
Contec's Anticon 100® HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching. The wipes are cleanroom…
-
These PROSAT ® Sterile ™ wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT ® Sterile ™…
-
ReFIBE Wipes
ContecContec’s ReFIBE wipes are made from 100% recycled plastic bottles making them a sustainable single-use option for critical manufacturers in the Life Sciences, Pharmaceutical, Medical Device, and Semi-Conductor industries. The revolutionary recycling process converts post-consumer plastic to…
-
SATWIPES® Sigma™ Wipes
ContecNonwoven hydroentangled polyester/cellulose blended wipes Dispensed from center-pull roll in a reusable canister Presaturated wipe refills are available Strong and durable Low levels of particles and extractable contaminants Each package is individually lot numbered …
-
Contec's Anticon 100® HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching. The wipes are cleanroom…
-
Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…
-
PROSAT Wipes with CyQuanol
ContecPROSAT® Wipes with CyQuanol™ are intended for Life Science cleanroom manufacturers who want to effectively maintain cGMP compliance by maximizing efficiency and minimizing inconsistency in their contamination control process. PROSAT Polynit Heatseal Wipes with CyQuanol are manufactured…
-
Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for Contec, Inc. products.
-
Anticon® Sterile Gold™ Wipes
ContecContec’s Anticon Sterile Gold is made from Anticon Gold HeavyWeight wipes. They are made from 100% continuous filament polyester with a double-knit no-run interlock construction. Anticon Sterile Gold uses patented textile technology to achieve superior sorption characteristics for critical…
-
Amplitude Lambda Wipes
ContecThe Amplitude™ Lambda™ wipes is made from a nonwoven fabric comprised of a hydraulically entangled blend of 58% cellulose and 42% polyester staple fibers. The Lambda wipe is strong and durable, even when wet, and is low in particles and extractable residues. An excellent all-purpose…
-
PROSAT® Pi wipes
ContecPROSAT® Pi wipes are designed to help life science manufacturers control contamination and ultimately maintain cGMP compliance while consuming less resources. The wipes are made from polyester and nylon split microfiber, enhancing their cleaning effectiveness and contaminant pick-up ability.…
-
PROSAT Quiltec® I Wipes
ContecPROSAT®, Quiltec® I wipes, presaturated with 70% IPA/30% DI Water, 12" x 12" (30 x 30cm), sterile Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for…
-
Anticon MicroQuilt Wipes
ContecAnticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec offers. MicroQuilt is laser-cut with heatsealed edges and cleanroom laundered…
-
Textured 100% polyester no-run knit wipes with heatsealed edges Laser-cutting seals fibers at wipe's edge and allows for 100% utilization of wipe Laundered and packaged in a ISO Class 4 cleanroom Extremely low in particles, fibers and non-volatile residues (NVRS) Good…
-
Contec’s PROSAT® Sterile™ Polypropylene Low Endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. …