Tubes, Supplies, 2.0 mL
-
DNA LoBind Tubes
EppendorfDNA LoBind Tubes maximize sample recovery of nucleic acids by significantly reducing sample-to-surface binding. The ideal solution for sample preparation and long-term storage of your precious samples! DNA LoBind tubes improve recovery of nucleic acids by reducing their absorption to the tube…
-
Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…
-
PYREX® Rimless Culture Tubes
CorningThese reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…
-
Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…
-
Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…
-
Microcentrifuge Tubes
United Scientific SuppliesMade from high-quality virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes…
-
Microcentrifuge Tubes
Celltreat ScientificMicro Centrifuge tubes are available in three sizes; 0.5ml, 1.5ml and 2.0ml. CELLTREAT Micro Centrifuge tubes have an attached flat top cap, engraved graduations and are manufactured from high quality polypropylene. The tubes have a temperature range of -80°C to 120°C. CELLTREAT Micro…
-
Micro Centrifuge Tube
Celltreat ScientificAll tubes have a frosted marking spot and engraved graduations Attached flat top cap is easy to open and close with one hand 1.5mL opaque black tube protects light sensitive compounds
-
SnapTwist™ Micrewtube®
SimportTube made of polypropylene Cap made of polyethylene The SnapTwist™ Micrewtube® provides all the advantages of a modern microcentrifuge tube with screw cap but the closure is a true time saver. The SnapTwist™ Micrewtube® has a multitude of applications around your lab.…
-
PYREX® VISTA Test Tubes
CorningBeaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.
-
0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…
-
BRAND Microcentrifuge Tubes
BrandTech®BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…
-
PYREX® VISTA Culture Tubes
CorningReusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.
-
ClearSeal™ Screw-Cap Microtubes
MTC BioClearSeal™ sterile screwcap microtubes come in a variety of sizes, cap configurations, graduation options, and even a loop-cap option for the 2.0mL. Made from ultra-clear polypropylene, these screwcap microtubes include assembled caps with silicone O-rings that assure a leakproof seal from…
-
CryoKING® Traditional Cryogenic Vials with pre-assembled Red, Green, or Blue Caps, Case of 1000. Size Options: 2mL, and 5mL. All tubes come with a 1D on the side
-
PYREX® Test Tubes
CorningWith lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Made of polypropylene Cap made of polyethylene The flexible sealing lip inside the cap ensures a positive leakproof seal under even the most adverse conditions. This deep internal lip fits snugly against the interior wall of the tube preventing the contents from coming in contact with the…
-
Microcentrifuge Tubes
NEST Scientific USAUSP VI grade polypropolyne material, free from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safelock cap design provides secure lid sealing Easy opening and closing Autoclave at 121°C/15 psi Temperature range:…
-
Posi-Lock™ Microcentrifuge Tubes Without Caps
labForce® (powered by Thomas Scientific)Posi-Lock™ capless tubes are ideal for customers not needing to seal their samples. With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…
-
titeSeal™ Microcentrifuge Tubes
ACTGene, Inc.1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …
-
Made of polypropylene Cap made of polyethylene Similar to the T336 Series but without the "tethered cap" feature. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. They have all the other fine features of…
-
Screw caps tubes and polypropylene caps
AlphaGem Bio, IncSuperior sealing with Patented Dual α Ring Seal technology, patent number D869275 Manufactured with ultra pure gasket seal materials in caps and medical grade ultra clear USP class 6 plastics for Tubes Double Start Threads provides greater thread contact area for superior strength…
-
2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…
-
Protein LoBind® Tubes
EppendorfEppendorf Protein LoBind Tubes are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results. Significantly more protein can be recovered for downstream analyses and enzymes…
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
G-Tube Microcentrifuge Tube
Bio PlasNo special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…
-
SuperClear® Screw Cap Microcentrifuge Tubes include caps with ethylene propylene O-Rings and are ideal for any sample processing application. Excellent for frozen storage or when working with hazardous or valuable materials. Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps…
-
Screw Top Micro Tubes, (Tube Only)
Celltreat ScientificHigh temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Grip band tubes feature ribs that provide exceptional gripping surface and lessen movement during centrifugation Graduated tubes have markings every 100µL for…
-
-
SuperClear® Screw Cap Microcentrifuge Tubes include caps with molded-in elastomeric seal or ethylene propylene O-Rings and are ideal for any sample processing application. Excellent for frozen storage or when working with hazardous or valuable materials. Packed 500 in a bag and 10 bags in a…