Test Tubes 10 Mm

Compare Tool

Select up to 3 products

Test Tubes 10 Mm
1 - 32 of 111
Sort
View
Show
  • With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

  • …materials. Internally ribbed 12 x 75 mm tubes are suitable for use in antibody coating and/or protein adsorptions. Six slanted ribs increase useful surface area. Tubes are bulk-packed and non-sterile and come without caps (except for tubes with screwcaps). Polyethylene caps are available.…

  • …both set up and use, giving rapid results. The samples can be measured in either standard or semi micro 10mm pathlength cuvettes or in 16mm diameter test tubes (adapters for 10/12 mm test tubes are available). Available in mains only or mains /internal rechargeable NiMH battery versions. Low…

  • Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

  • Tube Culture Graduated 10ml

    DWK Life Sciences (Kimble)

    KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

  •   Color-coded; helps prevent cross-contamination and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match those on…

  • mm path length, 22-25 mm diameter 840-202600 (Thomas 1189N81)  100mm Rectangular Cell Holder w/ Baseplate Holds one rectangular cell with 10-100 mm path length, 12.5 mm wide 840-202700 (Thomas 1189N82)  Test Tube Holder with Baseplate Holds test tubes

  • Tube Test Grad 10ml

    DWK Life Sciences (Kimble)

    Reinforced bead top Scale is a permanent brown stain Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • …Caps   Color-coded; helps prevent cross-contamination and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match…

  • …no danger of glass activation during testing. Polystyrene will tolerate aqueous solutions, mild bases and weak acids, but not organic solvents, aromatic or chlorinated hydrocarbons, and cannot be autoclaved. The T400-3ALST 12 mm x 75 mm tubes are made with a specially formulated…

  • … 7 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin.   Stir Bar Micro, 3X10 mm ( 1210D00 ) Product Dimensions (l x w x h) : 0.386x0.127x0in 10 MM length. For stirring  test tubes, micro-beakers,…

  • …walls, excellent heat resistance, and rounded bottoms mean tubes can be reused without issue. Borosil® Reusable with Plain End Test Tubes comply with ISO/DIN 4142. Available in a variety of sizes from 1mL (7mm x 60 mm) to 170mL (38mm x 200mm). In collaboration with Borosil…

  • …for autoclaving. Designed for easy-on, easy-off use, due to the exclusive Dual Thumb Tab. Cap removal is simple and quick. VACUCAP™ closure is ideal for recapping most 13 mm and 16mm O.D. evacuated glass blood collection tubes. 13 mm style can also be used on most 12 mm plastic test tubes.

  • … drip-free pouring easier. Designed to allow the use of midget urinometers and reagent test strips requiring only 1/4 or 1/2 ml of sample. The use of Simport tight-fitting plastic caps makes these tubes suitable for transportation in pneumatic tube systems. Size of tube: 105 mm H x 21 mm dia.

  • tubes Chemically clean Metal-free Tubes resist speeds of up to 5,000 rpm Ready-to-use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5, 1.0, 2.5, 5, 10, 12 and 15 mL. 17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with…

  • Labtop and Test Tube Coolers

    Thermo Scientific Nalgene

    …inserts to convert 1.5-ml holes to accept 0.2- to 0.5-ml microcentrifuge tubes. Excellent for transporting samples in vacutainers in hospitals and clinics. Coolers accommodate tube height up to 125 mm when lid is latched. Both accommodate cryogenic vials and 0.2- to 2.0-ml microcentrifuge tubes.

  • mm silica spheres, and one 4 mm glass bead. Lysing Matrix E tubes have purple caps and found in the FastDNA™ SPIN Kit for Soil and the FastRNA™ Pro Soil Kits. Product Description: Each impact-resistant 2 mL tube contains 1.4 ceramic spheres, 0.1 mm silica spheres, and one 4 mm

  • …and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL   All-purpose test tube used primarily with LaMotte Octet Comparators Graduated borosilicate glass Capacity 10 mL ; 13 mm o.d. x 110 mm length; flat bottom

  • SmoothRack Test Tube Racks

    FTR Enterprises

    The next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent position,…

  • Test Tube Rack Unwire™ Wht 13 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • Unwire Polypropylene Test Tube Peg Racks

    Thermo Scientific Nalgene

    tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x 12. 9260B25 and B37 racks are 17 mm with an array of 5 x 10.

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 100 x 15 mm Of clear polystyrene Total volume 12 mL Working volume 10 mL Tube is radiation sterilized and includes plug-seal, polyethylene stopper; packaged in sleeves of 100, five sleeves to a case.

  • …Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2 to 2 in 1/10, from 2 to 3 in 1/5, from 3 to 5 in 1/2, from 5 to 10 in 1, from 10 to 25 in 5 and at 50, 75, and 100 Dimensions: 37 mm o.d. x 200 mm L.

  • …Product Overview: Contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in the FastRNA Pro Red Kit and FastProtein Red Matrix. Product Description: Each impact-resistant 2 mL tube contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in…

  • …Caps   Color-coded; helps prevent cross-contamination and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match…

  • … Lysing matrix B is a critical component of FastPrep® sample preparation system. Each impact-resistant 2 mL tube contains 0.1 mm silica spheres. Lysing Matrix B tubes have blue caps and are found in the FastRNA™ Pro Blue Kit and FastProtein™ Blue Matrix. The fast and easy…

  • Ergoclips

    Mettler Toledo

    …46 mm and allows dosing directly into the desired tare container. Dosing in directly means avoiding transfer errors, thus precious substances can be saved. 1228Z93 ErgoClip helps to perfectly position several tubes (Eppendorf tubes, test tubes, reaction tubes or centrifuge tubes) of 32 x 32 mm.

  • Test Tube Rack Unwire™ Wht 16 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 75 x 12 mm Of clear polystyrene Total volume 5 mL Working volume 4.0 mL Tube is packaged under aseptic conditions in sleeves of 100, 30 sleeves to a case. Without stopper; see Thomas number 9219R30 for stopper.

  • Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube

  • …for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic…

  • … Autoclavable (with caps attached) Teal color cap Made in USA Validated Sterilization (ISO 11137) for use in Research and Medical labs on products: 20A00Q978 20A00Q980 20A00Q982 20A00Q984 5mL 15.2 mm W. 60.2 mm H 10mL 15.2 mm W. 94 mm H

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.