Overhead Stirrers, Stirrers, Equipment
-
Upward Flow Stirrers
Glas-ColContinuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…
-
Material: 316l stainless steel ra32 finish or better inside & out Includes: dust shield, impeller shaft folding paddle Locking ring secures paddle in horizontal position Dimensions: 3"x9"
-
-
Hei-TORQUE Overhead Stirrers
HeidolphThe Heidolph overhead stirrers of the Hei-TORQUE series are perfectly designed for powerful stirring, in order to achieve best mixing results even for very challenging applications. Hei-TORQUE Value These stirrers are ideal for standard stirring tasks. They are designed to mix and…
-
Stirrer Accessories
Arrow EngineeringSupport Stand Steel base; legs have rubber pads to cut vibration Support rod is made of stainless steel. Height is 29”; available in two models. Jacob's Chuck, Adjustable Fits 3/8 ” (10 mm) diameter motor shafts Keyless Chuck, Nylon-bodied …
-
With buffered load control and DC filtration. Ratings: AC three-prong output socket, standard NEMA type, 1200 watts. 0 -120 volts, variable, 60 Hz. maximum 10 amps. DC four-prong output socket, cinch type. 360 watts, 0 -150 volts, variable, filtered approximately 1/2 hp.max. 3 amps. A solid state…
-
Digital Stir-Testers
Glas-ColMedium Duty, Model HST10 Totally enclosed, 1/17 hp, permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz…
-
Caframo’s BDC2002 offers ultimate versatility and maximizes productivity. With the push of a button, the unique Stirlight™ lights up so that solutions can be seen clearly. Included in each purchase: Overhead stirrer motor, chuck, chuck key, support rod, external power supply, grounded…
-
Inert to corrosives Easy to clean Bendable into shapes These Saint-Gobain Chemware ® PTFE Fluoropolymer Stirring Rods contain a fully enclosed steel insert for stiffness, yet can bend into various shapes for use with powders. Heat resistant to 550° (288°C) and completely inert to highly…
-
Bearing, Trubore, Economy, 6mm
Ace GlassTrubore bearing, heavy duty, standard taper joint, self-aligning. Unique design is forgiving of slight misalignment of stir motor and shaft. Recommended for use with our 9534 6mm precision ground stir shaft.
-
Stirrer Blades PTFE construction Fit all standard shafts Will not scratch glassware Hole diameter: 6.5 mm Model 8596G58 to G70 shafts are for use with 8596G18 to G50 blades.
-
Benchmark’s Overhead Stirrers
Benchmark ScientificBenchmark’s Overhead Stirrers feature advanced LCD controls for accurate display of both speed and run time. The stirrers include a support stand complete with mounting hardware. The mixer is easily attached at the desired height for compatibility with a wide range of vessels (up to 24…
-
Caframo’s ultra torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of…
-
Caframo’s high torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high-performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of power. Caframo…
-
PTFE Shafts and Propellers
Arrow EngineeringMUST BE ORDERED AS AN ASSEMBLY. A PTFE Propeller must be ordered together with a PTFE Shaft (each purchased separately).
-
Scilogex offers two efficient and carefully controlled digital overhead stirrer models for the safe and effective mixing of large volumes of liquids. LCD and LED Digital overhead stirrer models offer considerable functionality that would not be available on a standard analog overhead stirrer.…
-
Thomas No. 1177M31 Sturdy stand in a smaller bench footprint, for Caframo compact stirrer models BDC2002 and BDC2010. The unique offset design accommodates Caframo clamp so stirrer locates impeller in centre of vessel. The cast zinc-aluminum alloy base is coated for protection from corrosion and…
-
Safe Operations Extremely resistant sealed case IP 54 Protection class is a guarantee of durability also when working in aggressive environment Full protection in case of overload, overtemperature and over current™ Lock key to prevent unintentional modification of the…
-
Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…
-
Clamping Systems
Arrow Engineering“Power Hold” Universal Clamps (8583L36 and L40) Designed with large knobs for powerful gripping plus an adjustable stop for speed and safety in set up and operation Made with precision machined aluminum rod for strength and durability Used for most applications Will hold any stirrer with…
-
400640 & 402645: Reusable Spinner Direct Top Drive Motor High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350…
-
MM-1000 Overhead Stirrer Multi Mixer, 120v & Accessories
Grant InstrumentsThe MM-1000 is designed for stirring liquids up to 20 litres. It is a quiet and reliable mixer that provides stable continuous mixing for up to 7 days and features 3 types of motion: Rotational, Reciprocal and Vibration. It is an ideal instrument for biotechnology, organic synthesis, analytical…
-
MAZ® Mixer KK
MediscaThe MAZ® is an integrated mixer and a deaerator system designed to perform both mixing and deaeration while simultaneously rotating and revolving the containers. This unique motion eliminates the need for mixing rods, blades and an evacuation device, thus reducing processing times. …
-
Stirrer Accessories
ScilogexAccessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid
-
Effective performance for excellent dispersion, homogenization and mixing The OV 625 Digital incorporates cutting-edge technologies and high levels of engineering expertise, to guarantee high shearing force and excellent homogenizing, emulsifying, suspending and mixing performance for a wide range…
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 15l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 7"
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 6l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 5 1/4?
-
Hi-torq SST over head drive impeller assembly - full width Size: 8l . For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60008 but to accept 1/2" shaft from 7764-74000 cap assy Material: 316l SST with elelctropolish finish Paddle size: 3" tall x 8" wide
-
Overhead Stirrers Accessories
IKA WorksThomas No. 1203B76 Stirrer diameter: 55 mm Thomas No. 1203B77 Stirrer diameter: 45 mm Thomas No. 1203B78 Stirrer diameter: 42 mm Thomas No. 1183U39 Stirrer diameter: 50 mm
-
RW 20 Digital Stirrer
IKA WorksSpeed range: 60-2000 rpm Stepless speed control Ambient temperature range: 5 to 40°C The RW 20 digital stirrer offers two speed ranges for universal use from 60 to 2000 rpm. Stirrer has a slim ergonomic design, digital display and constant power drive. Push-through agitator…
-
Telescopic H-Stand
VELPThe VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.