Overhead Stirrers, Stirrers, Equipment
-
Offset gearbox and motors complete with right angle drive unit for pilot plant systems. Motors with right-angle drive save headspace and work well where height is restricted. Available for standard or hazardous duty applications. Available in either 1/4hp or 1/2hp with a digital 115/230v 50/60Hz…
-
Stirrer Accessories
ScilogexAccessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blade stirrer Gentle processing samples, used at low and medium speeds Polytetrafluoroethylene (PTFE) coating has low coefficient of friction against a solid
-
Motor, AC variable, hazardous duty, 1/2hp,230/460v 60Hz²3 phase, complete with controller, 115v 50/60Hz input, CE and ²cULus rated. Control box cord to motor is 12ft long, control²box cord to electrial source is 24ft long.
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 36l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 12"
-
Caframo’s ultra torque stirrers are designed and engineered specifically to meet the continuous demands of heavy industrial use. The heart of the BDC line is the high performance Brushless Direct Current (BDC) motor. A unique two speed transmission provides incredible amounts of…
-
Electric Laboratory Stirrers
Arrow EngineeringElectronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…
-
Overhead Stirrer Accessories, Stands and Paddles
Techne (Cole-Parmer)Stands Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer. Paddle Rods Made from high grade stainless steel, there is a choice of five…
-
Motor Controller, Solid State
Ace GlassRated 1 hp. for use with most stirrer motors. Not for use with shunt wound DC motors. A compact, lightweight, solid state, ring stand mountable control unit, both AC and DC outlets. Pulsed AC gives better low speed torque than voltage dropping devices such as rheostat or transformer. AC output: 120…
-
The ReversingDigital stirrer maximizes productivity, fits into any area of the laboratory including a fume hood or enclosed workstation, and provides accurate and repeatable results every time. This stirrer also offers a choice of rotation direction - clockwise, counter clockwise or both (agitation…
-
Material: 316l stainless steel with ra32 finish or better Size: 15l Paddle size: 3" tall x 7 1/2" wide
-
The ROTAX 6.8 is suitable for waste treatment plants, waste-water treatment plants and laboratories involved in environmental analyses. An easy to use instrument with a digital display and speed settings ranging from 0 to 30 rpm. Precise and extremely safe, the ROTAX 6.8 offers excellent performance.
-
LH Overhead Stirrers
VELPThe LH is the ideal solution for medium-high viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs for…
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 6l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 5 1/4?
-
Hi-torq SST over head drive impeller assembly - full width Size: 8l . For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60008 but to accept 1/2" shaft from 7764-74000 cap assy Material: 316l SST with elelctropolish finish Paddle size: 3" tall x 8" wide
-
Air Motor, Heavy Duty
Ace GlassA compact, heavy duty air motor with highly damped muffler. Complete unit consists of an air hose with a snap coupling on motor end and shut-off valve on the other. Motor will develop 1.5 hp. at 90 lbs. air pressure. Speeds are variable from 300 to 3000 r.p.m. It consumes approximately 1.98m3 free…
-
Stir Shaft, Retreat Agitator, PTFE
Ace GlassPTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.
-
Stirrer Accessories
ScilogexAccessory for OS20-Pro LCD, OS40-Pro LCD, OS20-S LED and OS40-S LED Digital Overhead Stirrers. Blades open with increasing speed for stirring in a round vessel with a narrow neck, used at medium and high speeds Polytetrafluoroethylene (PTFE) coating
-
Stirrer, Laboratory, Solid State
Ace GlassTotally enclosed, 1/40hp DC permanent magnet motor with dual 8 mm (5/16") armature and gear shafts with milled flats. Armature shaft with maximum speed of 4000rpm.; 18:1 ratio gear shaft rated 3.6in-lb torque, up to 333rpm. Motor supplied with 1.5 meter 3-wire cable for controller connection.…
-
Bearing, Trubore, 5 & 6mm
Ace GlassTrubore bearing with standard taper joint for use with our 9534, 9535 and 9541 precision ground stir shafts. Lubricant well at top will accept enough 8117 Stir-Lube to provide hours of operation at up to 1000 rpm. Match bearing ID with stir shaft OD.
-
MINISTAR control Overhead Stirrers
IKA WorksThe new MINISTAR series by IKA: Developed using the latest cutting-edge technology, this high-tech overhead stirrer with its compact design is ideal for special applications. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee.…
-
PTFE Shafts and Propellers
Arrow EngineeringMUST BE ORDERED AS AN ASSEMBLY. A PTFE Propeller must be ordered together with a PTFE Shaft (each purchased separately).
-
Short width stainless steel folding impeller assembly for standard bioreactor vessels 8l 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3? x 6"
-
Double Vacuum/Gas Manifolds With Glass Plugs
DWK Life Sciences (Kimble)For connecting inert gas and vacuum sources Stopcock has metering groove cut into the plug to provide fine control of vacuum and inert gases. Distance between stopcocks is 65 mm for 8651N01 and 100 mm for 8651N03. Include patented pressure/vacuum retainers. Dimensions (mm): 8651N01: 230 L x…
-
Bearing, Trubore, Economy, 6mm
Ace GlassTrubore bearing, heavy duty, standard taper joint, self-aligning. Unique design is forgiving of slight misalignment of stir motor and shaft. Recommended for use with our 9534 6mm precision ground stir shaft.
-
Upward Flow Stirrers
Glas-ColContinuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…
-
The DLS is a digital overhead stirrer for medium-low viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs…
-
This lightweight micro stirrer is ideal for use with tissue grinders having stainless steel pestles. Supplied complete with a stirrer/controller, tripod with a vertical support rod, clamp holder and a coupling to fit the 6.35mm diameter of the stainless steel pestle rod.
-
LS Overhead Stirrers
VELPThe LS is suitable for use with low/medium viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs for…
-
-
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors.
-
Material: 316l stainless steel with ra32 finish or better Size: 36l Paddle size: 3" tall x 12" wide
-
MAZ® Mixer KK
MediscaThe MAZ® is an integrated mixer and a deaerator system designed to perform both mixing and deaeration while simultaneously rotating and revolving the containers. This unique motion eliminates the need for mixing rods, blades and an evacuation device, thus reducing processing times. …