The Burrell Scientific Wrist Action® Shaker has stood the test of time. Since 1940 the Wrist Action® Shaker has defined reliability, versatility, and efficiency of design. Its endurance proves that this product has continuously met the ever changing and growing needs of laboratories worldwide. The…

Designed for accurate speed control to continuously mixing or pulsing samples Digital display of Speed and Time Continuous and Touch modes Speed range: 200 to 3000rpm Precise speed control: ±5% rpm Quick set up to Max rpm: 3 seconds 1500 rpm (Touch) 6 seconds 3000…

Stable and accurate microplate shaking with standard and enlarged platform that can shake maximum of six microplates at one run. Product overview Digital display of Speed and Time Speed range: 150 – 1200 rpm Precise speed control: …

Gyratory action for gentle, thorough mixing Small fooprint, 15 x 24cm platform (6.7 x 9.5 in) Safe for cold room use These mixers have 20° tilt angle for gentle, through mixing. The dimpled rubber mat is designed to hold centrifuge and blood collection tubes. Mixing speed is…

The RotoBot™ Rotating Mixers feature advanced programming options that far surpass that of the traditional laboratory rotator. With digital speed control and more than 10 operating modes, the RotoBot can be selected to perform a wide variety of rotating, mixing and vibrating actions. In…

Benchmark’s QuadRocker features a unique, tiered attachment system that accepts up to four platforms. Unlike traditional single platform rockers, the QuadRocker includes a base level as well as three additional stacking platforms, providing a total work-surface of over 750 sq. in. For…

Reliable mixing, shaking and temperature control. With temperatures of up to 70 °C and a connectable circular movement, Varioshake shaking incubators are suitable for applications such as homogenization, incubation, fermentation or chemical and biochemical reactions.

Culture hundreds of samples on this industrial workhorse. Innova 5000 multi-tier shaker—an industrial workhorse Speed: 25 to 350 rpm (less for baffled flasks) Orbit: 2" counterbalanced shaker provides uniform agitation to all samples without being bolted to the floor.…

Digital speed control up to 1500 rpm 3mm orbit for thorough mixing in microplates Includes platform for up to 4 microplates Cold room and incubator safe The labForce® Microplate Shaker is designed with a 3mm mixing orbit, optimized for thorough mixing of microplates and/or PCR…

The GTR-IA Tube Rotator packs a lot of value in a simple, easy to use package. With a 'Ferris Wheel' disk design and analog speed control, operation and setup can be completed in minutes the very first time and every time. The fixed angle disk utilizes clips to hold 1.5/2.0mL, 15mL and 50mL tubes.…

Benchtop incubator shaker with optional refrigeration The Innova 40 incubated and 40R incubated and refrigerated benchtop shakers provide years of dependable operation. The cast iron Eppendorf triple-eccentric counterbalanced drive is specifically designed to support high-speed applications…

Designed for use in CO2 incubators and other extreme environments Remote controlled, adjust settings without exposing chamber 3mm orbit for thorough mixing of well plates Includes 6 position microplate platform The Orbi-Shaker CO2-MP is designed for thorough mixing of microplates in…

360° orbital waving rotator for efficient sample mixing with accurate speed control and easy angle adjustment Product overview Digital display of Speed and Time Speed range: 5 – 120 rpm Easy adjustable rocking Angle: 1°- 12° …

Maintain consistent shaking speeds, even over long periods of time. Smooth orbital shaking action with 16-mm orbit Built-in timer and digital speed LED display provide reproducible results. Can be used in incubators.

Gentle swirling prevents foaming. Adjust tilt angle for optimal mixing Built-in timer and digital speed LED  display provide reproducible results Can be used in incubators.

Provides a fast-mixing action in a tight orbit. Non-slip mat and platform lip securely hold plates Built-in timer and digital speed LED display provide reproducible result. Can be use in incubators.

The W.S. Tyler® RX-29-10 RO-TAP® 8 Inch sieve shaker (230 volts / 50 Hertz) holds 6 full height sieves or 13 half height sieves. The Industry standard in test shakers, W.S. TYLER™ RO-TAP® RX has a unique two dimensional operation: a horizontal, circular motion and a vertical,…

A thermoshaker designed for shaking and heating of deep well plates. A multisystem principle, used in design of the thermoshaker allows it to operate as 3 independent devices: Incubator Plate shaker Thermoshaker Features Profiled platform for perfect plate fit and…

Fitted with 4 microplates and wider speed range to accommodate various sample testing. Optimally designed to shake four microplates simultaneously, this Microplate Shaker is ideal for applications that demand precise and repeatable mixing. Operational Features Microprocessor PID…

Valuable time can be taken up mixing bottles and flasks by hand. Let the SF1 take the strain. Holding up to eight flasks or bottles, up to 500ml capacity, it creates a vigorous mixing action by simulating hand shaking - especially useful for applications where prolonged shaking is required as it…

The NS-10 Nutating mixer is an economical choice for many routine laboratory applications that require gentle yet thorough mixing . Compact; fits on any flat surface or benchtop Operating range:5°C to 40°C Load capacity: 1.75 lb. (0.8kg) Tubes can be placed on dimpled…

Three-dimensional gentle mixer The Corning LSE Nutating Mixer is a compact mixer that combines the motion of an orbital shaker and a platform rocker to produce a continuous three-dimensional agitation. The output demonstrates a thorough yet gentle mix without foaming. This mixer is safe to use…

This Benchtop Incubatopr Shaker is designed with a small footprint for many applications at the bench. Its sliding platform facilitates easy sample handling. The tempered glass door provides clear visibility. Ambient temperatures from 5C to 40C. Speeds up to 300rpm and an orbit…

Variable speed control Compact size Heavy duty Fuse protected Smaller size makes this ideal for use on a lab bench; in small incubations, refrigerators, biological cabinets and fume hoods; or in any other area where space is limited. Specifically designed to handle both large…

Analog speed control Continuous operation, no timer 0 to 70rpm 6 rollers with small footprint The MX-T6-S Tube Roller provides a gentle but highly efficient rocking and rolling motion, ideal for?mixing blood samples, viscous substances and liquid-solid suspensions. Used in a…

The stainless steel EZ-Clamp Test Tube Rack Clamp (part number HR0005-6) is a universal test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow…

The 2D Platform Rocker is excellent for a gentle mix of solutions, reagents, blotting and staining applications. It has a high-quality motor for durability and ultra-quiet operation. Space saving design and simple to operate make this a popular item for any laboratory.

The Crystal Technologies dimpled rubber mat is an ideal thing to have in any chemical laboratories, medicinal facilities or healthcare units for a wide range of purposes such as scientific research and development.

DLAB orbital and linear shakers are ideal for almost any vessel from microcentrifuge tubes through petri dishes and microtitre plates to conical flasks. Features: Max. load capacity is 7.5kg(O330) and 2.5kg(O180) with platform Double LCDs for independent display of time and speed …

Versatile, user-friendly shakers that offer reciprocating shaking and mixing for many hours with bench top convenience. Variable speed motor controller - mixing action from gentle, low speed shaking to vigorous, high speed shaking Compact - can fit inside a fume hood for added safety …

The industry leading RocketBox 2.0 commercial pre-roll machine can fill and pack 453 pre-rolls per cycle and up to 25,000 a day! The RocketBox 2.0 joint machine is our fastest, most efficient, yet user-friendly pre-roll filling machine and will reduce your costs! The RocketBox 2.0's built-in,…