SP Bel-Art Test Tube Racks
-
Scienceware® Standards Bottle Rack
SP Bel-ArtArranges valuable USP™ reference standards Rack fits into Secador® Desiccator for low humidity storage Clear acrylic construction for easy viewing of labels Wipes clean Stores thirty 23mm standards bottles in a compact footprint, 33 x 11 x 2.2 cm high.
-
Rotary Pipette Stand
SP Bel-ArtTurn to the Pipette You Want This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7-1/8") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered…
-
Round Microcentrifuge Floating Bubble Racks
SP Bel-ArtSpecifically designed for incubating 1.5mL microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded handle screws into the…
-
Chromatography Column Holder
SP Bel-ArtSecurely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height …
-
5 mL Centrifuge Tube Rack
SP Bel-ArtDesigned specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…
-
60mm Petri Dish Racks
SP Bel-ArtThis rack is useful for safe transport and incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to…
-
Scienceware® Pasteur Pipet Rack
SP Bel-ArtDesigned specifically for safe, convenient storage Sits flat on the bench top for convenient access without “dropping” other pipettes Has capacity of up to four sterilization cans Durable epoxy-coated surface Autoclavable Pasteur Pipettes, used in high volume for inoculating…
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…
-
Scienceware® Vacu-Rack
SP Bel-ArtThis polypropylene rack holds 143 vacuum-type syringe tubes: 80 tubes 12.7mm (1/2") O.D. and 63 tubes 16mm (5/8") O.D. up to 102mm (4") long. Tubes are suspended in channels by colored stoppers providing instant visual identification One or two channels may be left open…
-
Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can…
-
Scienceware® No-Wire™ Test Tube Half Racks
SP Bel-ArtCompact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
In-Line Test Tube Rack
SP Bel-ArtFor high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly
-
Scienceware® Hydrometer Racks
SP Bel-ArtPolypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers
-
Scienceware® Separatory Funnel Rack
SP Bel-ArtThe Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…
-
No-Wire™ Micro Tube Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F) Dimensions: 128mm x 105mm x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x…
-
Scienceware® Water Bath Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions 213mm x 110mm (8-3/8" x 4-5/16"). Durable polypropylene rack that sinks to the bottom of a water bath and remains upright when agitated. Height: 111mm (4-3/8"). Height top deck: 57mm (2-1/4"). Places: 72. Rows: 6 x 12. Tube size: 10-13mm.
-
Round Microcentrifuge Floating Racks
SP Bel-ArtPerfectly Sized for Beakers Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly…
-
Scienceware® Microtube Rack
SP Bel-ArtRound-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…
-
Scienceware® 3mm NMR Sample Tube Rack
SP Bel-ArtSturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at…
-
Poxygrid® 100mm Petri Dish Mini Rack
SP Bel-ArtOrganize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant…
-
Scienceware® Radioimmunoassay Tube Racks
SP Bel-ArtOrganize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…
-
Three Styles to Suit Your Needs Choose from 3 styles of epoxy-coated aluminum rack to hold Gilson Pipetman® pipettors. Provides storage and easy access for up to 10 pipettors plus up to two Pipet-Aid® pipettes 0211J40 (H18962-0001) for desktop storage 1226D30 …
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in microbiology and immunology labs. They are molded of buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy. Insert…
-
1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…
-
Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…
-
Adjustable Microplate Tilting Stand
SP Bel-ArtMinimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by…