Glass, Supplies, Ace Glass
-
Distilling Column, Vigreux
Ace GlassWith standard taper 24/40 joints. Length in centimeters refers to the effective length of the column as measured from the lowest to the highest indent of the column.
-
Reaction Flask
Ace GlassWith 4 mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. 4 inch ID conical flange requires Ace product family 6496 clamp for securing the head to the flask.
-
Adapter, Enlarging
Ace GlassConnecting, enlarging adapter with top female joint being larger than the bottom male joint.
-
Filter Reactor, Plain
Ace GlassSmall volume filter Reactor. Complete item includes: Reactor Body, head (14/20 joints), Clamp, PTFE Bottom Adapter with CAPFE O-Ring, 350 micron polypropylene screen support, 100 micron polyethylene support, 5844 Adapter, 5839-42 Shutoff Valve, 8066-12
-
-
Adapter, Twin, Ace-Thred
Ace GlassTwin adapter features two Ace-Thred top openings and a standard taper inner joint bottom. With the supplied nylon bushings, two tubes or a thermometer and bleed tube can be inserted through the same joint. The 24/25 medium length joint is compatible wi
-
Distilling Head,, Solvent Recovery
Ace GlassVersatile, for use as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water. As a solvent recovery unit, the lower 4mm PTFE double oblique stopcock permits total return to flask, total takeoff, and total storage in the 500mL graduated receiver. Bottom…
-
Adapter, Offset, Ace-Thred
Ace GlassThermometer adapter with inner joint at bottom and top threaded piece offset and angled approximately 10 degree for use in multiple neck flasks. Threaded Nylon bushing tightens into glass piece to form an O-Ring compression seal with thermometers, blee
-
Circulator Adapters, Universal
Ace GlassAce Glass universal pilot plant / circulator adapters and fittings designed for use with various manufacturer's circulators and our reaction systems.
-
Immersion Well, Photochemical, Quartz
Ace GlassDouble-walled, quartz Immersion Well for use with 7825-30, -32, -34, and -36 lamps. With inlet and outlet tubes for cooling or modified with a 4.8mm I.D. PTFE tube attached to a glass tube and secured with a #7 Ace-Thred bushing. Inlet tube extends down the annular space to insure flow of coolant…
-
Storage Tube, Schlenk
Ace GlassUsed for filtration of solvents and collection of precipitate. With two standard taper 14/20 or 24/25 outer joints and two standard taper 14/35 or 24/40 inner. With fritted disc.
-
Adapter, Bushing
Ace GlassBushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.
-
-
Cylindrical vessel with a 2mm bore PTFE stopcock at top, GPI threaded angled side port, & #15 Ace-Thred at bottom that accepts a PTFE adapter with removable Por. C glass filter disc & a PTFE shut-off valve. PTFE adapter has front type seal using a CAPFE O-Ring to make a compression seal in the #15…
-
Straight connecting adapter with standard taper inner joints at both ends. Various lengths.
-
Distilling Head
Ace GlassWith finger type condenser and 0-3 mm PTFE stopcock plug with PTFE ring seals for reflux control. The seals prevent O-Ring exposure to corrosive liquids and are backed up by a FETFE O-Ring. Thermometer joint is 10/30, all others are 14/20.
-
Adapter, Connecting Hose
Ace GlassAdapter with bent hose connection top and either a standard taper or ball joint inner bottom. Codes -110,-112,-114 have an integral porosity A fritted disc.
-
Tube, Capillary Gas Delivery
Ace GlassMicroscale bent capillary gas delivery tube for transferring gases generated during reactions to storage containers, such as 9588 Sampling Reservoir. With inner joint.
-
Adapter, Thermocouple Probe, Kilo Scale
Ace GlassAnti-whip, glass adapter for protecting 1/4in OD probes within kilo scale reactors. Complete unit consists of a heavy, glass sheath topped with a 45/50 standard taper joint with a #25 Ace-Thred, one #25 nylon bushing with a #7 Ace-Thred tap and one #7
-
Firestone splash guard adapter with medium length joints that will accept full length joints. Internal porosity A (147-174 micron) fritted disc that assures no carry-over in the event of pot splash-up. Overall length is kept to a minimum to positively
-
Still, Solvent Recovery
Ace GlassWhen attached to the top of Snyder Column, unit is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations. PTFE stopcock (1:5, 2mm bore) provides option for total reflux or takeoff. #7 Ace-Thred on side arm accepts tubing 6 - 7mm O.D. 5029-10 Nylon bushing and…
-
Adapter, Connecting Hose
Ace GlassAdapter with bent hose connection top and standard taper inner bottom joint.
-
Epoxy Adhesive
Ace GlassA two-component system; cures to a film highly resistant to chemicals which tightly bonds the PTFE sleeve to glass. If sleeve is damaged, the epoxy may be removed with boiling formic acid and a new sleeve may be attached. Supplied in 30mL jars with activator in separate container. 30mL will cement…
-
Joints, Spherical, Heavy Wall
Ace GlassFull length, heavy wall. U.S. Reissue Patent No. 22181. These famous ACE spherical joints are precision ground and vacuum leak-tested for fit and interchangeability. Available in both ball and socket members.
-
Schlenck Filter Tube, NO-AIR
Ace GlassSchlenk filter tube with an integral glass filter disc at the tube's mid-line and featuring inner joints at top and bottom.
-
Adapter, Claisen, Threaded
Ace GlassMicroscale Claisen adapter/head often used to facilitate syringe addition of reagents to sealed or moisture-sensitive systems. With inner joint at bottom and two outer joints externally threaded for an O-RING-CAP-SEAL connection with mating male joints. Supplied with two threaded caps with hole,…
-
-
Joints, O-Ring Seal, Spherical Ball
Ace GlassSpherical ball, precision ground, with groove for O-Ring, for use with matching socket members. Leak proof at high vacuums when clamped. O-Ring permits use without grease. Supplied with one FETFE O-Ring. For replacement O-Rings, see 7855. See 7669 or 7670 for clamps.
-
With standard taper 24/40 joint and outlet tube bent at 75 degree angle.
-
Jacketed quartz immersion well for use with our 7825 series lamps within our 6962,7863,7864,7865 & 7891 series reactors. Codes -23 & -35 feature a small diameter quartz inner feed tube to ensure the flow of coolant from the bottom of the well up to the outlet. Codes -26 & -38 feature a PTFE inner…
-
Joints, Extended Drip Tip
Ace GlassStandard taper ioint with lower tube reduced in diameter to size listed. Length of extended tube 101mm.
-
Joints, Luer Type
Ace GlassStandard luer type joint as found on syringes. Inside diameter through ground tip approximately 1.2mm.