Supplies, Ace Glass
-
Manifold, Vacuum
Ace GlassAll-glass-and-PTFE vacuum manifold with three, four or five stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied. For bakable systems,…
-
Condenser, High Capacity, Double Coil
Ace GlassHigh through-put, double coil condensers are designed to fit larger systems and pilot plant reactors. The design is similar to a rotary evaporator type condenser, where large volumes of material are being condensed at high temperatures and where large
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.
-
Tube Reduced Ace-Thred Ends
Ace GlassFilter tube with #15 Ace Threds on ends and an integral fritted disc. Disc diameter is 50mm and is available in different porosities. Supplied with #15 nylon bushings and 1/4" polypropylene hose barbs.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Flask, Single Neck, Spherical, Receiving
Ace GlassWith short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.
-
Borosilicate Glass Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…
-
Schlenck Filter Tube, NO-AIR
Ace GlassSchlenk filter tube with an integral glass filter disc at the tube's mid-line and featuring inner joints at top and bottom.
-
Sublimation Adapter, Adjustable
Ace GlassMicroscale sublimation adapter with vertically adjustable condenser tube that allows use with 3 mL, 5 mL, and 10 mL microscale vessels. Two-piece adapter features a #7 Ace-Thred at top of vacuum adapter that, with Nylon bushing and O-Ring, forms a compression seal with condenser tube, bottom 14/10…
-
Quartz immersion well, triple-walled, 60/40 inner joint for use in our 7841 and 7844 series photochemical reactor bodies. Designed for low temperature reactions cooled up to -78 degrees C. The outer two walls are permanently sealed and evacuated. The inner removable tube set consists of one each…
-
Adapter, 75 degree Angle
Ace GlassWith standard taper inner joints at bottom and side, outlet tube at top.
-
Microscale photochemical reactor with internally threaded connections both top and bottom of head. Top is #15 Ace-Thred that accepts 12.5-14mm O.D. tubes such as 9720-23 Finger Condenser; bottom is #25 Ace-Thred that accepts a 24mm O.D. quartz or glass (borosilicate) tube for photolysis…
-
Filter Disc, Packing Support
Ace GlassFilter discs available in plate glass, polyethylene (100 micron) and fritted glass porosities A (145-174 microns), B (70-100 microns), C (25-50 microns), and D (10-20 microns).
-
Beaker, Jacketed
Ace GlassJacketed beaker with one upper and one lower hose connection on opposite sides. Also available with Ace-Safe connections. All are without a pouring spout.
-
Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.
-
Round bottom, single neck flask with either a beaded tube end port or a beaded tube end well. Well I.D. on 6935-03 thru 6935-17 is approximately 9.5mm. Well I.D. on 6935-64 thru 6935-78 is approximately 9mm.
-
Adapter, Socket Joint
Ace GlassAdapters for joining jacketed reactor ball joint inlet/outlets to recirculator hoses. 28/15 and 35/25 sockets with various Ace-thred and tube ends.
-
Ferrules, PTFE
Ace GlassThomas No. 1165H91 Ferrule, PTFE, 1/8inid hole, use with #7 Ace-Thred, pk12 Thomas No. 1165H92 Ferrule, PTFE, 3/16inID hole, use with #7 Ace-Thred, pk/12 Thomas No. 1165H93 Ferrule, PTFE, 1/4inid hole, use with #7 Ace-Thred, pk12 Thomas No. 1165H94 Ferrule, PTFE,…
-
Adapter, Kjeidahl Trap
Ace GlassWith 24/40 standard taper joints. Distance between center of joints is approximately 200mm.
-
Standard Clamp
Ace GlassClamp is designed to fit 4 inch conical flanges, allowing the top half to be removed without disturing the lower half. Clamp features and extension arm (1/2 x 8 inch) suitable for attachment to an appropriate support stand or lab frame. Silicone liner will withstand temperatures up to 500ºdegF.
-
Carb Octopus Air Sampling Manifold
Ace GlassThe vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.
-
Condenser, Finger, with Joint
Ace GlassCold finger condenser for use with our 7756 series Schlenk reaction vessels.
-
Manifold, Vacuum, Firestone
Ace GlassVacuum/gas manifold with a Firestone Rapid Purge Valve at one end and 0-5mm High Vacuum, Easy Action PTFE Stopcock ports with 3/8" 0.D. Swagelok tubing connections. Each connection has an O-Ring groove (O-Rings supplied) for use with #11 Ace-Thred. Valve eliminates the need for a second tube.…
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
Apparatus designed by James Velasco of U.S.D.A. and published in the J.O.A.C., Vol. 46, No. 5, Pages 252-255. Newly designed flask increases the efficiency and standardization of neutral oil determination by: permitting automatic transfer of weighed crude oil samples onto alumina columns;…
-
Adapter, Gas Inlet
Ace GlassWith 24/40 standard taper inner and outer joints and side hose connection size D.
-
Crucible, Gooch High Form
Ace GlassWith fritted disc. Disc diameter 30mm, height above disc is 45mm. All porosities of a given size are priced the same.
-
Adapter, Distilling
Ace GlassFor connecting distilling column with vertical condensers. Top joint 10/30 is for 76 mm immersion thermometer. Side arm at 75 degree , vertical side arm 17.8cm from center tube.
-
Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Tube, Test, Stoppered
Ace GlassTest tube with interchangeable stopper; 24/40 stopper is hollow, other two solid.
-
Adapter, Thermometer, PTFE
Ace GlassPTFE adapter with FETFE O-Ring for use with plain stem thermometers, gas inlet tubes, etc. O-Ring compression seal allows adjustable depth positioning. 10/18 size will accommodate tubes up to 6.5mm, all other sizes up to 7mm. All sizes have one internal O-ring size -108. Except for 10/18 size, all…
-
With standard taper stopper joint. Stopcock available 1:5 PTFE plug. Stopper size is standard taper 24/40. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12. Stopper NOT supplied.