Labconco Laminar Flow Hoods & Enclosures
-
Coated Steel Blowers
LabconcoPhenolic-coated impeller and housing Dry powder epoxy-coated steel base and removable weather cover Belt-drive motor with adjustable sheave and self-adjusting gravity belt tightener
-
Fiberglass Blowers
LabconcoFiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres. …
-
Back Draft Damper
LabconcoMounts in vertical duct run to prevent reverse pressurization of the exhaust system 3.0" (8 cm) high with 10" (25.4 cm) diameter OD inlet and outlet Shipping weight 5 lbs. (2 kg)
-
Includes three stainless steel mounting hooks and three carabiners Hooks mount to the rear grille Carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area Shipping weight 3 lbs. (1 kg)
-
Base Stand Accessory Shelves
LabconcoGlacier white, epoxy-coated, 16 gauge steel Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies
-
5' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Purifier Horizontal Clean Bench
Labconco99.99% efficient HEPA filter Prefilter Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) Minihelic II pressure gauge Double-gasket, negative pressure HEPA filter leak protection Front-mounted light and blower switches Variable speed motor/blower(s) with vibration isolation pads …
-
Service Fixture Kit, includes serrated hose tip valve with quarter turn control handle, hardware and instructions for plumbing to services. Up to two fixtures may be mounted on the right hand side of the Purifier Horizontal Clean Bench.
-
Logic Vue Class II Enclosures
LabconcoThe Logic Vue is a specialized Class II enclosure designed to maximize protection and containment for large instruments such as liquid handlers, flow cytometers, and other pieces of automated equipment. The Logic Vue provides laminar, unidirectional ISO 5 air for product protection and meets or…
-
LED, Direct Wired T8 x 3' – newest models use on 4' & 8' Hoods – 12 watts each
-
PVC Blowers
LabconcoPVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid…
-
5' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Support Shelves
LabconcoProvide 8.0" x 20.0" (20 x 51 cm) work surface to support remote equipment within easy access of the biosafety cabinet Epoxy-coated steel shelf mounts to left-side tubular frame of base stand Includes epoxy-coated steel shelf and fasteners. Installation is required Not for use…
-
The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
Basic 47 & Basic 70 Fume Hoods
LabconcoIdeal for rooms with ceilings under eight feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece…
-
RXPert Double Filtered Balance Systems meet the USP <800>† requirements for non-sterile hazardous compounding. These Class I biological safety cabinets use double HEPA filtration to contain airborne particulates and powders, providing user protection during hazardous drug manipulation.…
-
The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
For use with Purifier Logic Biosafety Cabinets & PuriCare Procedure Stations Service Fixture Kit, includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior.
-
-
Purifier Vertical Clean Benches
LabconcoPurifier Vertical Clean Bench, provides ISO Class 5 conditions appropriate for applications such as plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Features include aerodynamic air foil, UV-resistant, glacier white and…
-
Logic Vue Inflow/Downflow Sensor
LabconcoAirflow Sensor Kit displays inflow and downflow velocities on MyLogic OS of LCD screen. Includes sensor, wiring harness and hardware. Installation and certifier calibration required.
-
Small Tubing Pass-Throughs for passage of larger tubing through sidewall of Logic Vue for external equipment such as Aerosol Management Systems (AMS), chillers, and other supportive equipment. Inner tube and outer flange constructed of a 16 gauge 304 stainless steel. Adds 1.8" (4.6 cm) to…
-
Large Tubing Pass-Throughs for passage of larger tubing through sidewall of Logic Vue for external equipment such as Aerosol Management Systems (AMS), chillers, and other supportive equipment. Inner tube and outer flange constructed of a 16 gauge 304 stainless steel. Adds 1.8" (4.6 cm) to…