Laminar Flow
-
The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
HEPA Filter
LabconcoApplicable Categories: Purifier Class I & HEPA Filtered Enclosures, PuriCare Bedding Disposal Stations, XPert & RXPert Balance & XPert Bulk Powder Enclosures Applicable Products: PuriCare Bedding Disposal Stations, Purifier Class I Enclosures, Purifier HEPA Filtered Enclosures,…
-
Securely support a laptop computer within easy view of an operator seated at the Purifier Logic Biosafety Cabinet or PuriCare Procedure Station. Mount to front of SoLo Base Stands or front leg of Telescoping Base Stands. Articulating arm raises, lowers and pivots to a steady position. Include…
-
Purifier Vertical Clean Benches
LabconcoPurifier Vertical Clean Bench, provides ISO Class 5 conditions appropriate for applications such as plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Features include aerodynamic air foil, UV-resistant, glacier white and…
-
Purifier Horizontal Clean Bench
Labconco99.99% efficient HEPA filter Prefilter Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) Minihelic II pressure gauge Double-gasket, negative pressure HEPA filter leak protection Front-mounted light and blower switches Variable speed motor/blower(s) with vibration isolation pads …
-
Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)
-
Basic 47 & Basic 70 Fume Hoods
LabconcoIdeal for rooms with ceilings under eight feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece…
-
The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in…
-
Vibration Isolation Table, provides an isolated work surface for conducting procedures with vibration-sensitive equipment such as microscopes and balances. The table never makes contact with the clean bench so vibration from the motor/blower is not transmitted to the table. Epoxy-coated steel…
-
LED, Direct Wired T8 x 3' – newest models use on 4' & 8' Hoods – 12 watts each
-
Canopy Hoods
LabconcoDesigned to vent non-toxic materials such as heat, steam and odors from large or bulky apparatus such as ovens, steam baths and autoclaves, wall-mounted or suspended from the ceiling, built-in baffle to increase air velocities and enhance its overall capture efficiency, glacier white epoxy-coated…
-
Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…
-
Logic Vue Class II Enclosures
LabconcoThe Logic Vue is a specialized Class II enclosure designed to maximize protection and containment for large instruments such as liquid handlers, flow cytometers, and other pieces of automated equipment. The Logic Vue provides laminar, unidirectional ISO 5 air for product protection and meets or…
-
Class II Cabinets IV Bar Kits
LabconcoIV Bar Kit for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Kit includes: IV bar, mounting hardware, four hangers and instructions for installation
-
RXPert Single Filtered Balance Systems are Class I biological safety cabinets that meet the USP <800>† requirements for non-sterile hazardous compounding. They provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods…
-
Purifier Horizontal Clean Bench
LabconcoPurifier Horizontal Clean Bench, provides Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) for work with materials that do not generate harmful aerosols or vapors, yet require a particulate-free environment. Exclusive features: double-gasket; negative pressure HEPA filter leak…
-
Canopy Connection Kit
LabconcoFor use with Labconco XPert Systems and Purifier Class I and HEPA Filtered Enclosures. Allow the enclosure to be thimble-ducted to the outside for additional protection. The canopy's air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the…
-
“Lazy Susan” holds miscellaneous items and rotates 360° to bring items within easy reach Stainless steel surface and ball bearings 12 in. (30 cm) diameter Autoclavable Shipping weight 5 lbs. (2 kg)
-
Base Stand Accessory Shelves
LabconcoGlacier white, epoxy-coated, 16 gauge steel Designed to hook on the lower rear horizontal cross member of the Telescoping Base Stand Provides storage space for wipes, cleaning agents, gloves and other miscellaneous laboratory supplies
-
The Purifier Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in…
-
Inflow And Downflow Sensor Kits
LabconcoAllow display of inflow and downflow velocities on the LCD information center Include airflow sensor, wiring harness and hardware Installation and certifier calibration are required Not for use on Class II, Type B2 cabinets.
-
Caster Kit for Base Stands, adds mobility to Hydraulic Lift Base Stands. Kit includes four 5" diameter, non-marking polyurethane casters with toe locks. Casters will replace fixed feet included with the stand.
-
The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…
-
Large Tubing Pass-Throughs for passage of larger tubing through sidewall of Logic Vue for external equipment such as Aerosol Management Systems (AMS), chillers, and other supportive equipment. Inner tube and outer flange constructed of a 16 gauge 304 stainless steel. Adds 1.8" (4.6 cm) to…
-
Logic Vue Inflow/Downflow Sensor
LabconcoAirflow Sensor Kit displays inflow and downflow velocities on MyLogic OS of LCD screen. Includes sensor, wiring harness and hardware. Installation and certifier calibration required.
-
Interior depth is 26.0" (66 cm). Plug type is British (UK). Purifier Horizontal Clean Benches direct HEPA-filtered air horizontally over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean…
-
Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.
-
For use with Purifier Logic Biosafety Cabinets & PuriCare Procedure Stations Service Fixture Kit, includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior.
-
Logic Vue Safety Interlock Cable
LabconcoSafety Interlock Cable provides interface between the Logic Vue and automation devices that employ a safety interlock. Opening the sash of the Vue triggers the interlock, immediately signaling a device to pause or stop.
-
RXPert Double Filtered Balance Systems meet the USP <800>† requirements for non-sterile hazardous compounding. These Class I biological safety cabinets use double HEPA filtration to contain airborne particulates and powders, providing user protection during hazardous drug manipulation.…
-
Air-Tight Damper
LabconcoMounts atop the Canopy Connection to adjust exhaust airflow and closes for decontamination procedures Manually adjustable, type 304 stainless steel 10"(25.4 cm) high with 10"(25.4 cm) diameter OD inlet and outlet Shipping weight 13 lbs. (6 kg)
-
PVC Blowers
LabconcoPVC Blower, made specifically to handle extremely corrosive atmospheres produced by high order oxidizers such as perchloric acid. Features: Vacuum formed housing of unplasticized Type I polyvinyl chloride for complete corrosion protection; inlet and discharge diameters are sized to receive rigid…
