Columns

Compare Tool

Select up to 3 products

Sort
View
Show

  • Bulk C18

    Separation Methods Technologies

    SMT manufactures the most reliable silica based octadecyl (C18) column available in the market today. This advanced new column is very stable at a wide pH range and high temperatures. SMT utilizes a proprietary bonding scheme that allows the resulting bonded phases to perform separation of basic,…

  • Specialty PFP Columns

    Separation Methods Technologies

    SMT-C6F5 columns consist of Pentafluorophenyl as the functional ligand. The columns offer selectivities that are different from other reversed-phase columns when applied to separation of halogenated compounds, ketones, esters, and taxols. Taxol has been approved by the US Food and Drug…

  • Bulk Phenyl 2

    Separation Methods Technologies

    SMT Phenyl bulk packings provides unique selectivity for aromatic compounds when compared to other reversed-phase packings such as C18 and C8. The ìÛ-electrons of the phenyl group can interact with the aromatic ring of an analyte to increase retention relative to less or non-aromatic…

  • Reversed-Phase C3 Columns

    Separation Methods Technologies

    SMT SAM-C3 columns consist of Propyl as the functional ligand. The columns offer selectivities that are different from C8 and C18 reversed-phase columns when applied to separation of polyaromatic hydrocarbons. SMT-C3 columns are specially designed as complementary alternatives for the separation…

  • OD Series Reversed-Phase C18 Column

    Separation Methods Technologies

    OD Series: SMT SAM-C18 phase with the highest functional ligand coverage confirmed with carbon analysis results of 24% carbon load. In these series, a very high density of the functional ligand, octadecyl (C18) molecule, is achieved through meticulous mixture of the C18 with proprietary spacer…

  • Bulk Diol 2

    Separation Methods Technologies

    SMT-Diol bulk packings are developed as an alternative for silica bulk packings used in separation methods. The Diol [-OH] functional group is controlled, and as such, provides more reproducible separation when compared to separation on silanols [-OH] from bare silica surface. Furthermore, the…

  • Normal Phase Aminopropyl Columns

    Separation Methods Technologies

    SMT manufactures very stable aminopropyl [NH2] columns. SMT aminopropyl columns are often recommended for the separation of polar compounds and can be used in three separation modes: Normal Weak Anion Exchange Reversed-Phase In normal phase mode, the columns can be used to…

  • Specialty Urea Columns

    Separation Methods Technologies

    SMT Urea columns consist of proprietary hydrophilic molecule as the functional ligand. The columns offer water-soluble functionality and selectivities that are different from other reversed-phase or normal phase columns when applied to separation of polar and basic compounds. SMT-Urea columns are…

  • Ion-Exchange DEAE Columns

    Separation Methods Technologies

    SMT-DEAE [Di-Ethyl-Amino-Ethyl] column provides a unique chemically attached hydrophilic, weak anion exchange type, functional surface desirable for the separation of many biomolecules such as proteins, nucleotides, oligonucleotides, polynucleotides, high molecular weight RNA?s and plasmid DNA?s.…

  • OL Series Reversed-Phase C8 Columns

    Separation Methods Technologies

    OL Series SMT SAM-C8 phase with the lowest functional ligand coverage confirmed with carbon analysis results of 6% carbon load. In these series, the proportional ratio of the functional ligand, octyl or C8 molecule , mixed with the proprietary spacer molecule, is reduced. The result is a…

  • Specialty Chiral 1 Columns

    Separation Methods Technologies

    Chiral compounds, or enantiomers have identical molecular structures that are related as mirror images of one another much like a left hand is related to a right hand. Rapid and accurate stereochemical resolution of enantiomeric molecules has become a challenge in various aspects of pharmaceuticals…

  • Bulk Aminopropyl

    Separation Methods Technologies

    SMT manufactures very stable aminopropyl [NH2] packings. SMT aminopropyl columns are often recommended for the separation of polar compounds and can be used in three separation modes: Normal Weak Anion Exchange Reversed-Phase In normal phase mode, the columns can be used to…

  • Bulk WAX

    Separation Methods Technologies

    SMT-WAX Bulk Packings are silica-based Weak Anion eXchange packing materials developed for separation of anionic compounds. SMT WAX Bulk Packings consist of chemically attached hydrophilic surface derivatized to form polyethyleneimine functionality. The technique of SAM is used in the bonding…

  • Reversed-Phase Phenyl-Hexyl Columns

    Separation Methods Technologies

    SMT Phenyl-Hexyl column or PhenH column, like the other SMT Phenyl columns, provides unique selectivity for aro- matic compounds when compared to other reversed-phase packings such as C18 and C8. The ìÛ-electrons of the phe- nyl group can interact with the aromatic ring of an analyte…

  • Elite Series Reversed-Phase C18 Columns

    Separation Methods Technologies

    Elite-C18 Series: SMT SAM-C18 phases with the intermediate functional ligand coverage confirmed with carbon analysis results of 16% carbon load. In these series, the density of the functional ligand, octadecyl molecule or C18, is moderated with the proprietary spacer molecule to ensure maximum…

  • SEC/GPC Columns

    Separation Methods Technologies

    SMTgel (silica-based) columns are specialty SMT columns designed for specific applications including gel permeation (GPC), ion exchange, reversed phase, hydrophobic interaction, hydrophilic interaction, and affinity chromatography. The packing materials feature modified surface chemistry…

  • ODL Series Reversed-Phase C18 Columns

    Separation Methods Technologies

    ODL Series: SMT SAM-C18 phase with the lowest functional ligand coverage confirmed with carbon analysis results of 12% carbon load. In these series, the proportional ratio of the functional C18 molecule, mixed with the proprietary spacer molecule, is reduced. The result is a packing material with…

  • Bulk C1

    Separation Methods Technologies

    SMT manufactures bulk packings with short carbon chains for rapid analysis of basic, neutral, and mildly acidic drugs and small molecules. These columns provide excellent baseline resolution for small basic molecules including therapeutic drugs. The bonding scheme ensures proper deactivation of the…

  • Bulk C8

    Separation Methods Technologies

    SMT manufactures the most reliable silica based octyl (C8) column available in the market today. This advanced new column is very stable at a wide pH range and high temperatures. SMT utilizes a proprietary bonding scheme that allows the resulting bonded phases to perform separation of basic,…

  • Bulk C2

    Separation Methods Technologies

    SMT manufactures bulk packings with short carbon chains for rapid analysis of basic, neutral, and mildly acidic drugs and small molecules. These columns provide excellent baseline resolution for small basic molecules including therapeutic drugs. The bonding scheme ensures proper deactivation of the…

  • Normal Phase Cyanopropyl Columns

    Separation Methods Technologies

    SMT manufactures ultra-stable cyanopropyl [CN] columns for normal and reversed-phase chromatographic separation modes. These columns have some special characteristics. When used in normal phase mode, with relatively nonpolar solvents, CN-stationary phase can separate many polar compounds just like…

  • Specialty CIB-IgG Columns

    Separation Methods Technologies

    SMT CIB-IgG are silica-based packing materials designed for for both high performance and low-pressure purification of protein A. In production of the IgG affinity-type columns, SMT utilizes its proprietary technique of self-assembled monolayer (SAM) of bonding to first immobilize unique mixed…

  • Reversed-Phase MEB1 Columns

    Separation Methods Technologies

    SMT manufactures columns with short carbon chains for rapid analysis of basic, neutral, and mildly acidic drugs and small molecules. These columns provide excellent baseline resolution for small basic molecules including therapeutic drugs. The bonding scheme ensures proper deactivation substrate…

  • Bulk Phenyl 1

    Separation Methods Technologies

    SMT Phenyl bulk packings provides unique selectivity for aromatic compounds when compared to other reversed-phase packings such as C18 and C8. The ìÛ-electrons of the phenyl group can interact with the aromatic ring of an analyte to increase retention relative to less or non-aromatic…

  • Normal Phase Diol 1 Columns

    Separation Methods Technologies

    SMT-Diol columns are developed as an alternative for silica columns used in normal phase separation methods. The Diol [-OH] functional group is controlled, and as such, provides more reproducible separation when compared to separation on silanols [-OH] from bare silica surface. Furthermore, the…

  • Reversed-Phase Phenyl 2 Columns

    Separation Methods Technologies

    SMT-Phenyl column provides unique selectivity for aromatic compounds when compared to other reversed-phase packings such as C18 and C8. The pie electrons of the phenyl group can interact with the aromatic ring of an analyte to increase retention relative to less or non-aromatic analytes. Unique…

  • AquSep Reversed-Phase C18 Columns

    Separation Methods Technologies

    SMT AquSep is unique reversed phase packing material designed to have both hydrophobic and truly hydrophilic spacer ligands. The mixed-phase consists of a meticulously controlled mixture of hydrophobic, C18 molecules, and proprietary hydrophilic molecules, chemically attached on the silica…

  • Bulk Cyanopropyl

    Separation Methods Technologies

    SMT manufactures ultra-stable cyanopropyl [CN] packings for normal and reversed-phase chromatographic separation modes. These columns have some special characteristics. When used in normal phase mode, with relatively nonpolar solvents, CN-stationary phase can separate many polar compounds just like…

  • Ion-Exchange WCX Columns

    Separation Methods Technologies

    SMT-WCX columns are silica-based Weak Cation eXchange packing materials developed for separation of cationic compounds. SMT-WCX consists of chemically attached hydrophilic surface derivatized to form carboxylic acid functionality. The technique of SAM is used in the bonding process to significantly…

  • Bulk WCX

    Separation Methods Technologies

    SMT WCX Bulk Packings are silica-based Weak Cation eXchange packing materials developed for separation of cationic compounds. SMT WCX Bulk Packings consist of chemically attached hydrophilic surface derivatized to form carboxylic acid functionality. The technique of SAM is used in the bonding…

  • Specialty TNT Columns

    Separation Methods Technologies

    SMT-TNT columns are specially designed C18 column for use in the reversed-phase separation of nitroaromatic and nitroamine derivatives. The isomeric nature of these explosive compounds is the reason for the difficulty in their separation. The standard test method for the analysis of seven…

  • Specialty C12 Columns

    Separation Methods Technologies

    SMT-C12 columns consist of Dodecyl as the functional ligand. The columns offer selectivities that are slightly different from C8 and C18 reversed-phase columns when applied to separation of polyaromatic hydrocarbons. SMT-C12 columns are specially designed as complementary alternatives for the…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.