150 mL
-
PES Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2…
-
Disposable Graduated Polypropylene Beakers
Maryland PlasticsChemically resistant Autoclavable Less rigid than reusable type Liquid level can be easily seen through translucent wall Low form beakers have spout and ribs on rim Size 15 mL graduated in 5 mL and 18 oz. intervals; sizes 30 and 50 mL in 5 mL and 14 oz.; sizes 100 and 150 mL in 5 mL and 12…
-
Scienceware® Buchner Funnels, Single Piece
SP Bel-ArtFlast flowing with Fritware® Porous Plates HDPE with sealed-in, polyethylene filter plate of coarse porosity (90-130 microns) Offer good retention and fast flow under vacuum Can be used with or without filter paper Use below 52°C (125°F)
-
Transluscent polypropylene beakers printed with blue graduations.
-
VITLAB Griffin Beaker, polypropylene (PP)
BrandTech®Griffin beakers in polymethylpentene (PMP), polypropylene (PP) and ethylene tetrafluoroethylene (ETFE). Choose PMP for glass-like clarity, ETFE for extreme chemical resistance and PP for general purpose use. Beakers are screened with approximate volumes.
-
PES Bottle Top Filters
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2…
-
Trypsinizing Flasks
DWK Life Sciences (Wheaton)For forming cell suspensions through trypsin digestion of connective proteins Fluted design improves homogenization Autoclavable with screw cap Constructed of borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Caps have white styrene butadiene…
-
PMP Griffin Beakers
BrandTech®PMP (polymethylpentene) provides glass-like clarity. Cleaning at no higher than 60°C is recommended to preserve markings on products with colored overprinting.
-
Screened white enamel graduations Sterilized by gamma radiation Large white marking spot Break resistant polycarbonate material 45 mm size cap provide greater access for liquid transfer Bottles can be autoclaved once at 121°C and 15 psi Easy opening packaging Available in…
-
Sterile Disposable Filter Funnel Unit
Thermo Scientific NalgeneAnalytical Filter Funnel, Polystyrene; Cellulose Nitrate (C.N.) Membrane CONTAINS FILTERS ONLY Nalge 140 47 mm diameter filter with grid Ideal for use with filtering flasks or manifolds Convenient snap-away design with removable membrane; funnel marked at 100 mL …
-
Borosil® Tall-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from…
-
-
PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…
-
Trypsinizing Flasks with Pourout
DWK Life Sciences (Wheaton)For forming cell suspensions through trypsin digestion of connective proteins Fluted design improves homogenization Autoclavable with screw cap and pourout for easy decanting Constructed of borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements 20-415…
-
Low Form, Heavy Duty Glass Beakers
United Scientific SuppliesHeavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.
-
Nalgene™ Griffin Low-Form Beakers, PPCO
Thermo Scientific NalgeneNalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…
-
KIMAX® Low Form Griffin Beakers
DWK Life Sciences (Kimble)KIMAX® Low Form Griffin glass beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal shock. They have been a staple in research laboratories for many generations. Thick, slightly flared, beaded top, with a spout…
-
KIMAX® Pink Colorware Low Form Griffin Beakers
DWK Life Sciences (Kimble)Please join us to support breast cancer prevention, treatment, and research by purchasing Pink Colorware from Kimble®. We will donate 20% of the proceeds to the Breast Cancer Research Foundation, the highest rated breast cancer organization in the United State. BCRF is recognized as one of the…
-
Low form beakers with spout, made of borosilicate glass, graduated as per ASTM-E960. Eisco Labs Borosilicate glass has the following heat tolerances Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
Beakers, PTFE, Low Form
ChemglassChemically inert PTFE beakers can withstand temperatures up to 260°C.
-
Dissolved Gas Analysis (DGA) Syringes
Cadence ScienceCadence Science® DGA glass syringes are used to take samples of mineral oil in a transformer. Transformer mineral oil cools the transformer and provides electrical insulation. When this mineral oil is subjected to high thermal and electrical stresses, it decomposes and gases are generated.…
-
SFCA Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.1 micron filters guard against mycoplasma contamination 0.2…
-
Nylon Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…
-
PYREX Heavy Duty Beakers
CorningExtra-heavy walls and rim minimize breakage These heavy duty beakers are specifically designed to offer the best mechanical strength under harsh conditions, such as mechanized washing operations. For convenience, the 250 through 4000mL beakers have a double graduated metric scale to indicate…
-
Colorware Low Form Griffin Beakers
DWK Life Sciences (Kimble)Jazz up your lab with brightly colored beakers Choose KIMAX® Low Form Griffin "Colorware" glass beakers for ease of identification in the lab. These beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal…
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
Tall form Beaker with Borosilicate glass spout and graduated as per DIN 12231, ISO 3819 Eisco Labs Borosilicate glass has the following heat tolerance Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
Glass Beaker, Low Form
United Scientific SuppliesOur beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.
-
CN Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…
-
Disposable Polystyrene Beakers
Eagle ThermoplasticsDisposable, translucent polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger,…
-
-
SFCA Bottle Top Filters
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…