Gas Syringe

Compare Tool

Select up to 3 products

Gas Syringe
1 - 32 of 152
Sort
View
Show
  • Whatman HEPA-VENT Vent Filters

    GE Healthcare

    …retention of even heavily particulate-laden air samples. Whatman HEPA-VENT filters are highly suited for applications where high retention, dirt-holding capacity, and flow rates are required. They are typically used as in-line filters during air or gas filtration in fermenters, or incubators.

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    …with luer lock cap to enable priming. An in-line filter works on the principle of "bubble point" – the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point, the gas will not pass through the membrane and is trapped by the filter device.

  • Whatman Solvent IFD In-Line Filter/Degasser (IFD)

    GE Healthcare

    …cap to enable priming. The in-line filter works on the principle of "bubble point" – the point of pressure at which gases will pass through a wet membrane. If pressure is maintained below the bubble point, the gas will not pass through the membrane and is trapped by the particular filter device.

  • HEPA-Cap Disposable Inline Filter

    GE Healthcare

    Disposable in-line filter retains 99.97% of all particles greater than or equal to 0.3 µm Provides clean/sterile air and gases Durable polypropylene Two sizes available HEPA-CAP housing is made of durable polypropylene. Media is laminated hydrophobic-treated glass microfiber. To ensure clean…

  • Jumbo Syringes

    SGE

    Designed for holding and dispensing large volumes of gas Heavy duty acrylic barrels Easy access to sample for the addition of standards or removal of subsample via secondary port Plunger stem can be unscrewed for ease of transportation and storage Ideal for calibration of medical…

  • Gas-Tight GC Syringes

    Thermo Scientific

    Gas-tight GC Syringes are accurate and reproducible over a range of volumes. Borosilicate glass with metal flanges Needles are stainless steel Plungers are PTFE Field-proven syringe design

  • Dissolved Gas Analysis (DGA) Syringes

    Cadence Science

    …generated from different types of faults, and the chemical analysis of these gases (Dissolved Gas Analysis) provides diagnostic information about the condition of the transformer. Cadence DGA syringes are custom fit (matched numbered) to create a tight fit between the barrel and plunger. The…

  • 1800 Series Gastight Syringes With Handles

    Hamilton

    …plungers resist bending. Plunger stop prevents blow-out. Handle adds balance to the assembly and friction screw at the top of the handle may be tightened to adjust plunger resistance. Replaceable needle syringes allow replacement of barrels and plungers. Needle: 2” length, point style 2.

  • Waters WISP HPLC Autosampler Syringes

    SGE

    SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components.Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a vast…

  • Syringe 1025Tll 25ml w / o Flange

    Hamilton

    Mid-volume GASTIGHT syringe ideal for dispensing volumes from 100 μL up to 100 mL. Gas Tight Size: 25mL Type: Reagent PTFE Luer-Lock PTFE-Tipped Plungers Use with Hamilton MicroLab and Digital Diluters and Dispensers.

  • 1 to 100mL Gas Tight Syringes

    SGE

    NIST Traceable For use with gasses Fixed, removable or Luer Lock needles Similar to 8929R01 series but in larger sizes. Luer Lock needles sold separately, see 8930D70 series.

  • All-Plastic Syringes

    Air-Tite

    …barrel with polyethylene plunger, medical grade plastic. Perfect substitute for glass syringes. Disposable, gas sterilized, pyrogen-free, economical. Clear accurate graduations. Special syringe caps allow samples to be temporarily stored. Syringes 8939N01 through 8939N37 have Luer slip tip.

  • Headspace/Soil Gas Syringes

    SGE

    Available in 5mL and 10mL capacities, the Gas Tight syringes are fitted with a valve (SVLL) and a special Luer Probe with a side hole for efficient sample intake.

  • Multi-Layer Foil Gas Sampling Bags

    Restek

    …film type appropriate for your application. All our bags feature a polypropylene combo valve with hose connection to fit 3/16" ID tubing and syringe port with replaceable septum. A single eyelet provides handling convenience. Good stability for low molecular weight compounds, such as…

  • MTB Valve

    Hamilton

    …Autoclavable Lever-actuated on/off valve for use with Luer Lock Gastight® syringes from 50 µL to 2,000 mL. Collect gas or fluid samples and transport or store them in their original sampling syringe. Teflon® fluid/gas path ensures the highest level of inertness. Kel-F® hub…

  • 1750LTN 500UL DIGITAL SYRINGE

    Hamilton

    Gas Sterilizable No Volume 500 µL Syringe Type Gastight Syringe Series 1700 Termination Luer Tip Cemented Needle (LTN) Needle Cemented Needle Gauge 22 gauge Point Style 2 Needle Length 2 inch (51…

  • 50mm Inline Syringe Filters with PTFE Membrane

    Thermo Scientific Nalgene

    …50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent barrier for sterile venting of benchtop fermentors, or protecting vacuum pumps from moisture. Autoclavable. Useful for benchtop fermenters, in-line gas filtration for…

  • Syringe Filters and 50mm Units, Sterile - MCE, CA, NY, PES, PTFE

    Advantec MFS

    …purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters and 50mm in-line filter units. The Acrylic(AC) and Polypropylene(PP) housing materials are high purity and pigment-free. Adhesives are not…

  • Disposable Monoject Syringes

    Covidien

    …color-coded hub shows blood flashback Autoclavable Non-Sterile (1230Z93) Syringes do not include needle Latex-free, can be autoclaved or gas sterilized Syringes with detachable needle (8541B47-B53) 1 cc with 0.01 cc and 0.5 minims. Sterile Flat…

  • Syringe 1001Ltnch 1.0ml (22/2"/2)

    Hamilton

    Volume 1 mL Syringe Type Gastight Syringe Series 1000 Termination Luer Tip Cemented Needle (LTN) Needle Cemented Needle Gauge 22 gauge Point Style 2 Needle Length 2 inch (51 mm) Needle Inner Diameter …

  • Diamond MS Syringes

    SGE

    …MS syringes and needles are MS ready and designed to improve the sensitivity of your MS results. Lowest syringe carryover The unique design of Diamond MS syringes and removable needles ensures carryover is reduced to levels lower even than the best fixed needle syringes available.…

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    … For use on a syringe for clarification or pre-filtration of small volumes of fluids Disposable 25 mm filters, utilizing a glass prefilter Unitary construction provides leakproof seal, eliminates bypass and minimizes fluid loss Can be used with standard and Luer-Lok syringes and hypodermic…

  • Syringe 7001Khwg 1Ul (25S/2.75"/3)

    Hamilton

    …inches (0.124 mm) Barrel Outer Diameter 0.308 inches (7.82 mm) Maximum Temperature 115°C / 239°F Minimum Temperature 10°C / 50°F Sales Quantity 1 syringe per pack Syringe Type Microliter Syringe Series 7000

  • Omni-Fit Valve NMR System

    Wilmad LabGlass

    The Wilmad Omni-Fit NMR valve system is designed for easy injection of samples through a gas-tight syringe without the need for a glove box in anaerobic applications. Omni-Fit valve (OFV) is a complete accessory set Comprised of a 5mm end cap, 2 way valve, septum with cap, barrel coupler,…

  • Syringe 1001Tllch 1.0ml

    Hamilton

    Volume 1 mL Syringe Type Gastight Syringe Series 1000 Termination PTFE Luer Lock (TLL) Needle Metal (N) or Kel-F Gauge No Needle Included Point Style No Needle Included Needle Length No Needle Included …

  • Series A-2 gas syringe capacity 0.5 mL

    MilliporeSigma

    …Sample-Lok push-button valve allows sample storage in syringes as small as 25μL and permits pressurization of samples prior to injection, for better resolution. Plunger, when fully depressed, makes flush contact with bottom of syringe barrel, virtually eliminating dead volume. Parts are…

  • 10µL to 500µL Gas Tight Syringes

    SGE

    …superior quality. Constructed from borosilicate glass, PTFE plunger tips and Kel-F® or PTFE Luer cones where applicable Assembled with an interference fit between plunger tip and barrel to effect the gas sealing properties of the syringe Plungers are replaceable on these syringes

  • Syringe Filters

    Celltreat Scientific

    …membrane life when filtering viscous solutions Syringe Filter (PES) PES – Low affinity for proteins and extractables Faster flow rate than PVDF 0.10µm is ideal for mycoplasma removal Syringe Filter (SFCA) SFCA – Good for cell culture…

  • CTC® LC Autosamplers Syringe

    Hamilton

    Syringe Type: GASTIGHT Syringe Series: 1700 Termination: Cemented Needle (N) Needle: Cemented Needle Gauge: 22s gauge Length: 2 inch (51 mm) Point Style: 3 Autoclavable: No Fluid Path: SST, Borosilicate glass, PTFE Gas

  • Syringe 1705Dx 50ul

    Hamilton

    Syringe Type Gastight Syringe Series 1700 Termination Diluter PTFE Luer Lock (D) Needle No Needle Available Fluid Path Borosilicate glass, PTFE, PCTFE Plunger Style Instrument Plunger Stop (X) Autoclavable No Gas

  • Syringe 1001Dx 1.0ml

    Hamilton

    Syringe Type Gastight Syringe Series 1000 Termination Diluter PTFE Luer Lock (D) Needle No Needle Available Fluid Path Borosilicate glass, PTFE, PCTFE Plunger Style Instrument Plunger Stop (X) Autoclavable No Gas

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.