Test Tube Stopper

Compare Tool

Select up to 3 products

Test Tube Stopper
1 - 32 of 53
Sort
View
Show
  • Polyethylene Stopper Caps

    Evergreen Scientific

    Polyethylene stopper caps to fit a variety of general purpose test tubes

  • Rubber Stoppers

    Plasticoid

    …for added chemical resistance Listed mainly by trade-size, available in solid, one-hole, and two hole rubber stoppers. Uses vary widely, some are outlined below: Carboy Stoppers Crucible Holders Laboratory & Test Tube Stoppers Masking Applications Micro Stoppers Pipe Plugs Tube Stoppers

  • Test Tubes With Glass Stoppers

    DWK Life Sciences (Kimble)

    …with Standard Taper solid ground glass stoppers Tubes have a sand-blasted spot for marking 100 x 13 mm size test tubes include No. 9 Standard Taper stopper; 150 x 16 and 150 x 19, No. 13; 175 x 22 and 200 x 25, No. 19. Tube length (without stopper) x tube o.d. are shown in table below.

  • 17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…

  • …resistance, and rounded bottoms mean these tubes can be reused without issue. Each tube is graduated in metric units, and comes with a standard taper glass stopper. Borosil® Reusable Heavy Duty Test Tubes with Graduations and Glass Stoppers are available from 10mL (17mm x 160mm) to 100mL…

  • …precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped.  These Class A volumetric flasks have been manufactured to…

  • …and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match those on Vacutainer™ to prevent sample confusion…

  • …to a test cartridge. Blood collection tube dispenser for Point of Care testing instruments Dispenses blood drops easy with no need to open collection tubes Dispenses one drop of blood onto test cartridge or cassette Fits standard glass or plastic blood tubes with rubber stoppers

  • Test Tube Rack Set

    United Scientific Supplies

    This set contains twleve 24 mL glass test tubes with rubber stoppers, and a brightly colored two tiered test tube stand.

  • 15mL Centrifuge Tubes

    Evergreen Scientific

    15 ml centrifuge tubes are precision molded from premium-grade, chemically-inert thermoplastics. Polystyrene tubes are glass-clear and our new formulation of polypropylene is nearly transparent. Accurate, easy-to-read graduations are molded-in at 0.1 ml intervals from 0-1 ml and at 0.5 ml…

  • Mity Plugs

    Jaece

    Cellulose Acetate plugs for all size test tubes and laboratory flasks. MITY Plugs are non-shedding, dense weave cellulose acetate E plugs for drosophila vials and bottles. Dense weaving offers a superior barrier to mite infestation. Allows for reduced food evaporation to keep food fresh…

  • Test tube with interchangeable stopper; 24/40 stopper is hollow, other two solid.

  • …graduations: Made from virgin polypropylene Assures ultra low metal content 0 to 15 graduation lines in increment of 1mL 5mL - 10mL - 15mL graduation lines are accurate to Class A tolerances (+/-0.10mL) Tubes fit standard Autosampler Racks Plug stoppers sold separately.

  • KIMAX Brand Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …ASTM Standard E 288 Capacity/stopper size given in listings Supplied with color-coded PTFE stoppers (4997L15 to L65) Flasks have marking spots on all sizes 10 mL and larger. The 2 mL size is test tube shaped; all other sizes are conventional flask shape. The 5 mL and larger sizes are designed…

  • Stoppers

    Dynalon

    …disposable test tubes.  Stoppers - Test Tubes 16 MM (1211Z93) Product Dimensions (l x w x h) : 0x0.58x0.844in Natural Test Tube Stoppers. Low-Density Polyethylene, 16mm tubes. Single- position tight fitting stopper to fit disposable test tubes such as our 9933 test tube

  • …blood. Blood collection tube dispenser for Point of Care testing instruments Dispenses blood drops easy with no need to open collection tubes Dispenses one or more drops of blood Fits standard glass or plastic blood tubes with rubber stoppers Polystyrene USP Class VI Stainless…

  • Dilatometer Bottle, Black Scale

    DWK Life Sciences (Kimble)

    …10°C. Results are expressed as melting dilation in mL/kg of fat. Method is described in A.O.C.S. Method Cd. 10-57. Stem is made from precision bore tubing and overall accuracy of graduations is ±0.005 mL. Includes a 329105-000 solid (closed) stopper and one 675300-0014 polyacetal clamp.

  • Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

  • …and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match those on Vacutainer™ to prevent sample confusion…

  • Polyethylene stopper caps to fit a variety of general purpose test tubes.

  • …and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer™ after the original rubber stopper is removed Cap colors match those on Vacutainer™ to prevent sample confusion…

  • Test Tube with Outer Joint

    Wilmad-LabGlass - SP Scienceware

    This borosilicate glass test tube has a round bottom and a Standard Taper outer joint. See LG-10300 and LG-10310 for stoppers.

  • Test Tube Holder 10-13mm accommodates test tubes with 10-13 mm OD. Two may be stacked for increased capacity. Stacked holders can't accommodate an upper rack in the washer. Type 304 stainless steel. Requires Labconco 4575300 Conversion Kit & Lower Spindle Rack (not included). Test Tube

  • Plug-seal type Packaged under aseptic conditions

  • 1-place or 6-place Support cup accepts a No.8 or 8b stopper Features a flushing manifold Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought…

  • …Single Phase, 4A. Dimensions (L x W x H, inches): 12 x 10 x 21; weight : 18 1/2 lbs. Includes four rubber stoppers for bomb openings. Test Tube Baths (7151K89 and K92) Test up to 16 samples at once Microprocessor control Maximum temperature: 374°F (±2°F)/190°C…

  • …sterility testing of antibiotics and pharmaceuticals. Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts…

  • These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

  • The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Holder accommodates up to eight 50 mL glass centrifuge tubes and test tubes up to 28 mm diameter, 140-180 mm long (stoppered) Up to 2 holders can be shaken at once …

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 75 x 12 mm Of clear polystyrene Total volume 5 mL Working volume 4.0 mL Tube is packaged under aseptic conditions in sleeves of 100, 30 sleeves to a case. Without stopper; see Thomas number 9219R30 for stopper.

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 100 x 15 mm Of clear polystyrene Total volume 12 mL Working volume 10 mL Tube is radiation sterilized and includes plug-seal, polyethylene stopper; packaged in sleeves of 100, five sleeves to a case.

  • Graduated concentrator tubes for use with Kuderna-Danish evaporative set-ups. Tube can be stoppered for storage. Overall height is 100mm for 10mL, and 170mm for the 25mL.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.