Stoppers

Compare Tool

Select up to 3 products

1 - 32 of 160
Sort
View
Show
  • Free from volatiles or extractable substances which may impair cell growth; for use at temperatures from -80 to 450°F Can be steam sterilized at 15 lbs. pressure, making them suitable for culture tubes containing pathogenic materials Length: 25 mm Not recommended for use with…

  • Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

  • Sani-Tech® ultra-pure platinum-cured silicone stoppers outperform standard neoprene and rubber stoppers in critical laboratory and process applications. These long-life silicone stoppers are fully autoclavable and sterilizable and will not crack, spallate or invoke particle migrations that can…

  • Interchangeable plungers Luer-Lok™ tip Without needle Multifit interchangeability eliminates matching components after sterilization. Fine inference line on plunger for precise volume adjustments. Capacity and graduation interval are shown in listings. Zone 2 coded.

  • Rubber Stoppers

    United Scientific Supplies

    Rubber Stoppers packaged in convenient 1lb bags. Available in solid, 1 hole, and 2 hole versions.

  • Standard Grade Sizes No. 00, 0 and 1 have holes 2, 3 and 4 mm diameter, respectively; all other sizes have holes 5 mm diameter

  • Standard Grade Size No. 000 is 18 mm long; sizes No. 00 to No. 13 are 25 mm long. Sizes No. 13 1/2, 14 and 15 are 35 mm, 36 mm and 39 mm respectively.

  • Solid green Neoprene Withstands exposure to temperatures up to  120°C Usable with petroleum products, vegetable and mineral oils and fats which deteriorate natural rubber Standard length: 26 mm Increased functionality over rubber stoppers at elevated temperatures. Not recommended for…

  • No. 8 Perforated Stopper

    MilliporeSigma

    Designed for use with 1L and 4L vacuum filtering flasks and 47mm vacuum filter holder assemblies 100% Silicone Material Perforated, 1-hole accepts filter holder assemblies and tubing Pack of 5

  • Stopper Assortment

    Plasticoid

    Made of soft, pliable, black-compounded stock Length: 25 mm Includes stoppers of solid, one-hole and two-hole styles in sizes 00, 0, 1, 2, 3, 4, 5, 6, 6 1/2, 7 and 8; total of 66 stoppers

  • Rubber Stoppers

    Plasticoid

    M35 Green Neoprene for added chemical resistance Listed mainly by trade-size, available in solid, one-hole, and two hole rubber stoppers. Uses vary widely, some are outlined below: Carboy Stoppers Crucible Holders Laboratory & Test Tube Stoppers Masking Applications Micro Stoppers Pipe…

  • Unique seal system allows use as solid or one-, two- or three-hold closures Simplifies stock room inventory Molded of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3)…

  • Black Rubber Stoppers

    GSC International, Inc.

    A black rubber stopper that is useful in a number of applications. Available in a variety of sizes. Each pack is one pound. Choose from solid, 1 hole, and 2 hole stoppers.

  • Sleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn. Available in either RED or WHITE rubber.

  • Assorted 1 Hole Rubber Stoppers

    GSC International, Inc.

    1 pound package of assorted 1 hole rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 4 each Size 3: 4 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each

  • Poly-Cone Universal Joint Adapter

    Bel-Art - SP Scienceware

    This precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…

  • Stopper

    DWK Life Sciences (Kimble)

    These stoppers are used as an accessory for microscale threaded Standard Taper 14/10 kits. Pennyhead stopper sizes 10/18 through 19/22 are solid borosilicate glass Sizes 24/25 and larger are hollow borosilicate glass Manufactured from 33 expansion, low extractable borosilicate glass…

  • Cork Stoppers

    GSC International, Inc.

    Quality, laboratory grade Cork Stoppers. Available in the following sizes: Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12 Size 14 Size 16 Size 20 Size…

  • Neoprene Stoppers

    United Scientific Supplies

    Neoprene stoppers can be used in areas where rubber would be attacked by reagents or solvents. Synthetic neoprene stoppers have good resiliency and shelf-life. They withstand petroleum products and oils as well as most inorganic acids and bases. Stopper are green for easy identification. Sold by…

  • Borosil® Solid Penny Head Glass Stoppers are with Interchangeable Ground Joint and can be used with Volumetric Flask of 5645, 5647 families or for other suitable joints. Manufactured with low extractable quality grade USP Type I, 3.3 Borosilicate Glass confirming to ASTM E438 Class A…

  • Stopper Pennyhead 34/45

    DWK Life Sciences (Kimble)

    Stoppers are used with laboratory glassware such as flasks and separatory funnels. Sizes Standard Taper 24/40 and larger are hollow Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • These blue and white No. 13 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental…

  • Suba-Seal® septa are a flanged stopper with a hollow plug and sleeve extension that folds down over the neck of the vessel. In addition to the pull over sleeve, Suba-Seal® stoppers have a series of annular serrations on the plug portion of the septa. Each of these serrations depress along…

  • The hollow stopper is light in weight, yet very strong to reduce chipping and breakage, thus minimizing replacement costs. A barrel-shaped head means it is easy to clean and even easier to rotate in or out. Grooves in the sides help prevent slippage. The flat top allows the stopper to stand on its…

  • Pennyhead stoppers are generally used in flasks and separatory funnels.

  • Silicone Stoppers with Holes

    DWK Life Sciences (Kimble)

    General purpose single-hole silicone rubber stoppers. Steam autoclavable Opaque yellowish-white color Stoppers are manufactured from pure silicone rubber

  • No 8 Stopper, Silicone

    DWK Life Sciences (Wheaton)

    Silcone rubber stopper Makes the connection to a standard 1 liter Erlenmeyer-style filtration flask Size: No. 8 Case of 6

  • Ultra Pure Stoppers

    DWK Life Sciences (Wheaton)

    Bromobutyl rubber compound with a high level of chemical purity Straight Plugs and Lyophilization Stoppers (2-leg, 3-Leg and Igloo) are available All Ultra Pure Stoppers are autoclavable Ultra Pure Straight Plug Stoppers are made from a bromobutyl rubber compound containing the…

  • Inexpensive, tapered stopper provides for a tight, leak-proof fit while the top ring permits the stopper to be easily removed. Stoppers are made of yellow Polyethylene

  • These blue and white PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental tipping. These…

  • 13.5 Rubber Stopper Similar to CG-3026 except with one hole. These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with…

  • All sizes are solid with the exception of the #38 (CG-3018-08) which is hollow.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.